DRA05/10/18 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧3 YEARS WARRANTY R R R H H H UL 1310 Class I, Div 2 a UL 60950-1 IND. CONT. EQ. UL 508 EN 60950-1 MODEL LIST DRA18- 24 x Wattage 05 : 05V OUT 15 : 15V OUT 12 : 12V OUT 24 : 24V OUT BLANK : SPRING TERMINAL TYPE A : SCREW TERMINAL TYPE MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) Single Output Models DRA05-05(A) 90~264 VAC 5 WATTS + 5 VDC 1A 67% 69% DRA05-12(A) 90~264 VAC 5 WATTS + 12 VDC 0.42 A 70% 72% DRA05-15(A) 90~264 VAC 5 WATTS + 15 VDC 0.34 A 70% 72% DRA05-24(A) 90~264 VAC 5 WATTS + 24 VDC 0.21 A 70% 72% DRA10-05(A) 90~264 VAC 10 WATTS + 5 VDC 2A 71% 73% DRA10-12(A) 90~264 VAC 10 WATTS + 12 VDC 0.84 A 73% 75% DRA10-15(A) 90~264 VAC 10 WATTS + 15 VDC 0.67 A 74% 76% DRA10-24(A) 90~264 VAC 10 WATTS + 24 VDC 0.42 A 74% 76% DRA18-05(A) 90~264 VAC 15 WATTS + 5 VDC 3A 73% 75% DRA18-12(A) 90~264 VAC 18 WATTS + 12 VDC 1.5 A 75% 77% DRA18-15(A) 90~264 VAC 18 WATTS + 15 VDC 1.2 A 75% 77% DRA18-24(A) 90~264 VAC 18 WATTS + 24 VDC 0.75 A 75% 77% max. max. unit unit SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Conditions Conditions Characteristics min. min. typ. typ. Switching frequency Vi nom, Io nom Isolation voltage Input-Output 3,000 / 4,242 VAC / VDC Input-FG 1,500 / 2,121 VAC / VDC 500 / 710 VAC / VDC Output-FG 132 Isolation resistance Input-Output, @ 500VDC 100 Ambient temperature Operating at Vi nom -20 www.chinfa.com 2015.03.31 KHz MΩ + 71 o C [email protected] P1 DRA05/10/18 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Derating (see derating curve) Storage temperature Relative humidity o unit 2.5 % / oC + 85 Vi nom, Io nom 20 95 Vi nom, Io min DRA05 Bellcore Issue 6 @40oC, GB DRA10 Bellcore Issue 6 @40oC, GB DRA18 Bellcore Issue 6 @40oC, GB Installation position max. -25 MTBF Dimension Cooling typ. o Vi nom, from +61 C to +71 C Non operational Temperature coefficient Altitude during operation min. Conditions o C % RH % / oC ± 0.03 5V 806,000 Hours 12V 15V 831,000 Hours 846,000 Hours 24V 5V 888,000 Hours 728,000 Hours 12V 15V 767,000 Hours 780,000 Hours 24V 5V 808,000 Hours 704,000 Hours 12V 15V 721,000 Hours 735,000 Hours 24V 764,000 EN 60950-1 Spring & Screw terminal type Hours m 5,000 mm L90 x W22.5 x D114 Free air convection Vertical ( other direction may derating using ) Pollution degree 2 INPUT SPECIFICATIONS Characteristics Rated input voltage Conditions Absolute input max. range Io nom Ta min ... Ta max, Io nom Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 90 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom DRA05 Vi : 230 VAC, Io nom DRA10 Vi : 230 VAC, Io nom DRA18 Vi : 230 VAC, Io nom Leakage current AC in DC in typ. max. unit 100 240 VAC 90 120 264 375 VAC VDC min. DRA05 115 / 80 mA DRA10 200 / 130 mA DRA18 335 / 210 mA DRA05 200 mA DRA10 300 mA DRA18 500 mA 63 15 / 30 Hz 47 A 5V 2.2 W 12V 15V 1.9 W 2.1 W 24V 5V 1.8 W 4.0 W 12V 15V 3.4 W 3.3 W 24V 5V 2.8 W 5.0 W 12V 15V 4.65 W 4.25 W 24V 4.45 W Input-Output 0.25 mA Input-FG 3.5 mA max. unit +1 % OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 www.chinfa.com 2015.03.31 typ. % ±1 % [email protected] P2 DRA05/10/18 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed OUTPUT SPECIFICATIONS Characteristics max. unit Io nom, Vi min ...Vi max ±1 % Load regulation Vi nom, Io min ...Io nom Vi nom, 0.8 Io nom % Voltage trim range Rated continuous loading Conditions typ. Line regulation DRA05 series Vi nom DRA10 series Vi nom DRA18 series Vi nom min. 5V 4.5 ±2 5.75 12V 10.8 13.8 V 15V 13.5 17.25 V 24V 5V 21.6 Turn on time Rise time Vi : 115 / 230 VAC , Io nom 28.8 1.0 A @ 5Vdc / 0.85 A @ 5.75 Vdc V 12V 15V 0.42 A @ 12Vdc / 0.36 A @ 13.8 Vdc 24V 5V 0.21 A @ 24Vdc / 0.17 A @ 2 8.8 Vdc 12V 15V 0.84 A @ 12Vdc / 0.72 A @ 13.8 Vdc 24V 5V 0.42 A @ 24Vdc / 0.34 A @ 2 8.8 Vdc 12V 15V 1.5 A @ 12Vdc / 1.3 A @ 13.8 Vdc 0.34 A @ 15Vdc / 0.28 A @ 17.25 Vdc 2 A @ 5Vdc / 1.7 A @ 5.75 Vdc 0.67 A @ 15Vdc / 0.58 A @ 17.25 Vdc 3 A @ 5Vdc / 2.6 A @ 5.75 Vdc 1.2 A @ 15Vdc / 1.0 A @ 17.25 Vdc 0.75 A @ 24Vdc / 0.6 A @ 2 8.8 Vdc 24V Hold up time V DRA05 30 / 130 ms DRA10 25 / 100 ms DRA18 20 / 75 ms Vi nom, Io nom Vi nom, Io nom DRA05 & DRA10 with 3500μF CAP 1,000 ms 1,500 ms Vi nom, Io nom Vi nom, Io nom DRA18 1,000 ms with 7000μF CAP 1,500 ms Vi nom, Io nom Vi nom, Io nom DRA05 & DRA10 with 3500μF CAP 150 ms 500 ms Vi nom, Io nom Vi nom, Io nom DRA18 150 ms with 7000μF CAP 500 ms Fall time Transient recovery time Vi nom, Io nom 150 ms Vi nom, 1~0.5 Io nom Vi nom, Io nom, BW = 20MHz Vi nom, Io nom 1 second 2 50 ms Ripple & noise Power back immunity 7.5 VDC 12V 15V 18 VDC 22 35 VDC 24V Capacitor load Vi nom, Io nom DC ON indicator threshold at start up (Green LED) Vi nom, Io nom DRA05 & DRA10 Vi nom, Io nom 7,000 μF 5V 3.5 4.5 VDC 12V 15V 9.0 10.8 VDC 11.0 13.5 VDC 24V 5V 18 3.5 21.6 4.5 VDC VDC 12V 15V 9.0 10.8 VDC 11.0 13.5 VDC 24V Efficiency VDC μF 3,500 DRA18 DC LOW indicator threshold after start up (Red LED) mV 5V Vi nom, Io nom, Po / Pi VDC 18 21.6 Up to 77%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection IEC 61000-4-5 Vi nom (see typ current limited curve) Over voltage protection Vi nom, 0.8 Io nom (Auto Recovery) 2015.03.31 max. unit T2A / 250VAC internal Rated over load protection www.chinfa.com typ. Varistor 110 165 % 5V 6.25 7.25 V 12V 15 17.4 V [email protected] P3 DRA05/10/18 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed CONTROL AND PROTECTION Characteristics Conditions Over voltage protection min. Vi nom, 0.8 Io nom (Auto Recovery) 15V 18.75 24V 30 Output short circuit typ. max. unit 21.75 V 34.8 Hiccup mode V Degree of protection IP20 APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310 Class 2 Power Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) TUV EN 60950-1 CE Vibration resistance EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3, L / N-FG Level 4 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 GB4943.1, GB9254, GB17625.1 meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) CCC PHYSICAL CHARACTERISTICS Case size 90 x 22.5 x 114 mm (3.6 x 0.89 x 4.49 inches) Case material Weight Plastic DRA05 & DRA10 : 120 g Packing DRA05 & DRA10 : 0.21 kg ; 56 DRA18 : 0.23 kg ; 56 DRA18 : 150 g / 12.5 kg / 2.16 CUFT / 14 kg / 2.16 CUFT MECHANISM & PIN CONFIGURATION 22.50 [0.89] 22.50 [0.89] 2 1 2 1 V- V+ V- V+ DC Output DC Output LO ON LO ON Vout ADJ. 90.00 [3.60] 90.00 [3.60] mm [inch] 114.00 [4.49] Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safeIy and firmly on the rail. INSTALLATION Ventilation / Cooling Normal convection All sides 25mm free space For cooling recommended Connector size range Spring terminal: AWG24-14 (0.2~2mm2 ) flexible / solid cable, 10 m/m stripping at cable end recommends Screw terminal: AWG26-12 (0.2~2.5mm2 ) flexible / solid cable, connector can withstand torque at maximum 5 pound-inches. 4-5 m/m stripping at cable end recommends Use copper conductors only, 60 / 75oC Vout ADJ. N L CONSTRUCTION N L GENERAL TOLERANCE 3 4 5 3 4 5 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] PIN ASSIGNMENT Designation 1 2 OUT PIN NO. Positive output terminal V - Negative output terminal Ground this terminal to minimize high-frequency emissions IN 3 4 OTHER 5 www.chinfa.com 2015.03.31 Description V+ N Input terminals (neutral conductor, no polarity at DC input) L Input terminals (phase conductor, no polarity at DC input) ON Operation indicator LED LO DC LOW indicator LED Vout ADJ. Trimmer-potentiometer for Vout adjustment [email protected] P4 DRA05/10/18 SERIES CIRCUIT SCHEMATIC ‧Block diagram L Fuse Line Filter N Vo + Inrush Current Switching Limiter and Device Rectifier Y Rectifier Control Current Detection Vo - Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. Output Level Detection TYP. CURRENT LIMITED CURVE DC ON (Green LED) DC LOW (Red LED) DERATING CURVE v 100 Power out [ % ] Output Voltage [ % ] Hiccup mode 100 50 75 Safe Operating Area 0 -20 t Time o 61 71 Temperature [ C ] TYP. EFFICIENCY CURVE 80 75 70 65 60 55 50 45 40 35 30 25 230 Vac 115 Vac 50 Power out [ % ] 75 100 2015.03.31 230 Vac 115 Vac 25 DRA18-24(A) 85 80 75 70 65 60 55 50 45 40 35 10 www.chinfa.com 85 80 75 70 65 60 55 50 45 40 35 10 25 EFFICIENCY [ % ] 10 DRA10-24(A) EFFICIENCY [ % ] EFFICIENCY [ % ] DRA05-24(A) 50 Power out [ % ] 75 100 230 Vac 115 Vac 25 50 Power out [ % ] 75 100 [email protected] P5