CXP85200A/85290A CMOS 8-bit 1-chip Microcomputer Description The CXP85200A/85290A are CMOS 8-bit 1-chip microcomputers that serve as both piggyback and evaluator. The CXP85200A/85290A is developed for evaluating the function of the CXP85112B/85116B/ 85220A/85224A/85228A/85232A. Note that CXP85200A corresponds to the fixed font, and CXP85290A corresponds to the custom font respectively. 64 pin PSDIP (Ceramic) Piggyback/ evaluator type 64 pin PQFP (Ceramic) 64 pin PSDIP (Ceramic) Features • Instruction set which supports a wide array of data types — 213 types of instructions which include 16-bit calculations, multiplication and division arithmetic, and boolean bit operations. • Minimum instruction cycle 1µs/4MHz • EPROM 27C256 LCC type 27C256 • Incorporated RAM capacity 448 bytes • EPROM for custom font (CXP85290A only) LCC type 27C256 (used volume is 4K bytes) • Peripheral functions — On-screen display function 12 × 16 dots, 128 types, 8 colors, 21 characters × 4 lines (More than 5 lines possible) Double scanning mode, jitter elimination circuit — I2C bus interface — PWM output 14 bits, 1 channel 6 bits, 8 channels — Remote control receiving circuit 8-bit pulse measurement counter, 6-stage FIFO — A/D converter 4 bits, 4 channels, successive approximation system (conversion time of 40µs/4MHz) — HSYNC counter — Power supply frequency counter — Watchdog timer — Serial I/O 8-bit clock synchronized — Timers 8-bit timer, 8-bit timer/counter, 19-bit time-base timer • Interrupts 14 factors, 14 vectors multi-interruption possible • Standby mode Sleep • Package 64-pin ceramic SDIP/QFP Structure Silicon gate CMOS IC Note) Optional mask depends on the type of the CXP85200A/85290A. Refer to the product list for details. Purchase of Sony's I2C components conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specifications as defined by Philips. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. –1– E94333A7Y-PS CXP85200A/85290A CXP85200A Pin Assignment: Piggyback mode 1 (Top View) 64 pin PSDIP Package PA7 1 64 VDD PA6 2 63 NC PA5 3 62 VSS PA4 4 61 MP PA3 5 60 PF0/PWM0 PA2 6 59 PF1/PWM1 PA1 7 58 PF2/PWM2 PA0 8 57 PF3/PWM3 PB7 9 PB6 10 A15 PB5 11 A12 PB4 12 A7 PB3 13 A6 PB2 14 A5 PB1 15 A4 56 PF4/PWM4/SCL0 28 VDD 55 PF5/PWM5/SCL1 2 27 A14 54 PF6/PWM6/SDA0 3 26 A13 53 PF7/PWM7/SDA1 4 25 A8 52 BLK 5 24 A9 51 R 6 23 A11 50 G B VSYNC 1 PB0 16 A3 7 22 OE 49 PC7 17 A2 8 21 A10 48 PC6 18 A1 9 20 CE 47 HSYNC PC5 19 A0 10 19 D7 46 EXLC PC4 20 D0 11 18 D6 45 XLC PC3 21 D1 12 17 D5 44 PE0/INT0 PC2 22 D2 13 16 D4 43 PE1/INT1 PC1 23 GND 14 15 D3 42 PE2/AN0 PC0 24 41 PE3/AN1 PD7/EC 25 40 PE4/AN2 PD6/RMC 26 39 PE5/AN3 PD5/ACI 27 38 PE6/PWM PD4/HSI 28 37 PE7/TO PD3/SI 29 36 RST PD2/SO 30 35 EXTAL PD1/SCK 31 34 XTAL VSS 32 33 PD0/INT2 Note) 1. NC (Pin 63) is always connected to VDD. 2. Vss (Pins 32 and 62) are always connected to GND. 3. MP (Pin 61) is always connected to GND. –2– CXP85200A/85290A PF2/PWM2 PF1/PWM1 PF0/PWM0 MP NC VDD VSS PA7 PA6 PA5 PA4 PA3 PA2 CXP85200A Pin Assignment: Piggyback mode 2 (Top View) 64 pin PQFP Package 4 PB5 5 PB4 6 A6 5 PB3 7 A5 PB2 8 A4 PB1 9 PB0 10 PC7 PC6 3 2 1 51 A13 4 A14 PB6 VDD 3 NC 2 PB7 A15 PA0 A7 1 PA1 A12 64 63 62 61 60 59 58 57 56 55 54 53 52 32 31 30 PF3/PWM3 50 PF4/PWM4/SCL0 49 PF5/PWM5/SCL1 48 PF6/PWM6/SDA0 47 PF7/PWM7/SDA1 29 A8 46 BLK 6 28 A9 45 R 7 27 A11 44 G A3 8 26 NC 43 B A2 9 25 OE 42 VSYNC 11 A1 10 24 A10 41 HSYNC 12 A0 11 23 CE 40 PC5 13 NC 12 22 D7 39 XLC PC4 14 D0 13 21 D6 38 PE0/INT0 PC3 15 37 PE1/INT1 PC2 16 36 PE2/AN0 PC1 17 35 PE3/AN1 PC0 18 34 PE4/AN2 PD7/EC 19 33 PE5/AN3 D5 D4 D3 NC GND D2 D1 14 15 16 17 18 19 20 Note) PE6/PWM RST PE7/TO XTAL EXTAL PD0/INT2 VSS PD1/SCK PD3/SI PD2/SO PD4/HSI PD5/ACI PD6/RMC 20 21 22 23 24 25 26 27 28 29 30 31 32 1. NC (Pin 56) is always connected to VDD. 2. Vss (Pins 26 and 58) are always connected to GND. 3. MP (Pin 55) is always connected to GND. –3– EXLC CXP85200A/85290A CXP85200A Pin Assignment: Evaluator Mode 1 (Top View) 64 pin PSDIP Package PA7 1 64 VDD PA6 2 63 NC PA5 3 62 VSS PA4 4 61 MP PA3 5 60 PF0/PWM0 PA2 6 59 PF1/PWM1 PA1 7 58 PF2/PWM2 PA0 8 57 PF3/PWM3 PB7 9 PB6 10 PB5 11 A12 PB4 12 A7/D7 PB3 13 A6/D6 PB2 14 A5/D5 PB1 15 PB0 16 PC7 17 A2/D2 PC6 18 A1/D1 PC5 19 A0/D0 56 PF4/PWM4/SCL0 28 VDD 55 PF5/PWM5/SCL1 2 27 A14 54 PF6/PWM6/SDA0 3 26 A13 53 PF7/PWM7/SDA1 4 25 A8 52 BLK 5 24 A9 51 R A4/D4 6 23 A11 50 G A3/D3 7 22 HALT 49 B 8 21 A10 48 VSYNC 9 20 E/P 47 HSYNC 10 19 I/T 46 EXLC XLC A15 1 PC4 20 RD 11 18 MON 45 PC3 21 WR 12 17 RST 44 PE0/INT0 PC2 22 SYNC 13 16 C1 43 PE1/INT1 PC1 23 GND 14 15 C2 42 PE2/AN0 PC0 24 41 PE3/AN1 PD7/EC 25 40 PE4/AN2 PD6/RMC 26 39 PE5/AN3 PD5/ACI 27 38 PE6/PWM PD4/HSI 28 37 PE7/TO PD3/SI 29 36 RST PD2/SO 30 35 EXTAL PD1/SCK 31 34 XTAL VSS 32 33 PD0/INT2 Note) 1. NC (Pin 63) is always connected to VDD. 2. Vss (Pins 32 and 62) are always connected to GND. 3. MP (Pin 61) is always connected to GND. –4– CXP85200A/85290A PF2/PWM2 PF1/PWM1 PF0/PWM0 MP NC VDD VSS PA6 PA7 PA5 PA4 PA3 PA2 CXP85200A Pin Assignment: Evaluator Mode 2 (Top View) 64 pin PQFP Package PB5 5 PB4 6 A6/D6 PB3 7 A5/D5 PB2 8 A4/D4 9 4 PF4/PWM4/SCL0 A13 4 3 2 1 32 31 30 48 A14 3 PB6 PF3/PWM3 50 VDD PB7 51 NC 2 A12 1 PA0 A15 PA1 A7/D7 64 63 62 61 60 59 58 57 56 55 54 53 52 5 49 PF5/PWM5/SCL1 PF6/PWM6/SDA0 47 PF7/PWM7/SDA1 46 BLK 29 A8 6 28 A9 45 R 7 27 A11 44 G 43 A3/D3 8 26 NC 10 A2/D2 9 25 HALT 42 VSYNC PC7 11 A1/D1 10 24 A10 41 HSYNC PC6 12 A0/D0 11 23 E/P 40 EXLC PC5 13 NC 12 22 I/T 39 XLC PC4 14 RD 13 21 MON PC3 15 C1 18 19 RST PC0 PD7/EC 14 15 16 17 18 19 20 C2 17 NC 16 PC1 GND PC2 SYNC PB0 WR PB1 38 PE0/INT0 37 PE1/INT1 36 PE2/AN0 35 PE3/AN1 34 PE4/AN2 33 PE5/AN3 PE6/PWM RST PE7/TO XTAL EXTAL VSS PD0/INT2 PD2/SO PD1/SCK PD3/SI PD4/HSI PD5/ACI PD6/RMC 20 21 22 23 24 25 26 27 28 29 30 31 32 Note) 1. NC (Pin 56) is always connected to VDD. 2. Vss (Pins 26 and 58) are always connected to GND. 3. MP (Pin 55) is always connected to GND. –5– B CXP85200A/85290A 6 D3 PB2 14 PB1 PB0 A4 A5 A6 D5 20 30 A13 A9 A6 9 8 7 6 5 A8 A11 A5 13 12 11 10 NC A4 21 22 23 24 25 26 27 28 29 63 NC 62 VSS 61 MP 60 PF0/PWM0 59 PF1/PWM1 58 PF2/PWM2 57 PF3/PWM3 56 PF4/PWM4/SCL0 55 PF5/PWM5/SCL1 54 PF6/PWM6/SDA0 53 PF7/PWM7/SDA1 52 BLK 51 R 4 A7 15 D2 15 3 A12 50 G 16 GND 16 49 B NC 17 D3 48 VSYNC D4 27 PD4/HSI 28 PD3/SI 29 30 44 PE0/INT0 43 PE1/INT1 42 PE2/AN0 41 PE3/AN1 A8 26 XLC A6 PD6/RMC 45 A9 25 EXLC A11 PD7/EC 46 A5 24 A13 21 22 23 24 25 26 27 28 29 A4 PC0 20 NC 23 HSYNC A3 PC1 47 OE 22 A14 30 A10 PC2 31 A2 21 19 A1 PC3 VDD D7 20 32 CE PC4 D5 18 NC 19 A15 NC D6 18 2 1 For custom font D0 PC6 PD2/SO A14 VDD 14 17 PD5/ACI 31 64 D1 PC7 PC5 19 A3 13 D4 OE PB3 VDD A10 12 32 A2 PB4 18 A1 11 A15 NC D6 PB5 2 1 For custom font D0 10 A3 A12 17 PB6 A2 3 16 9 NC 15 NC PB7 A0 D2 GND 8 5 A7 5 PA0 6 4 PA3 7 7 14 4 PA1 8 D1 PA4 PA2 A1 3 9 13 12 11 10 9 8 7 6 5 A0 PA5 13 12 11 10 D7 2 CE PA6 NC 1 A0 PA7 D0 CXP85290A Pin Assignment: Piggyback Mode (Top View) 64 pin PSDIP Package D1 14 4 A7 40 PE4/AN2 39 PE5/AN3 38 PE6/PWM 37 PE7/TO D2 15 3 A12 GND 16 2 A15 NC 17 1 NC D3 18 32 VDD D4 19 31 A14 36 RST D5 20 30 A13 35 EXTAL 34 XTAL 33 PD0/INT2 For programming Note) A8 A9 A11 NC OE 32 A10 VSS D7 31 CE PD1/SCK D6 21 22 23 24 25 26 27 28 29 1. NC (Pin 63) is always connected to VDD. 2. Vss (Pins 32 and 62) are always connected to GND. 3. MP (Pin 61) is always connected to GND. –6– CXP85200A/85290A 6 D3 14 PB1 PB0 D5 20 30 A13 A11 A9 A4 A5 A6 A8 21 22 23 24 25 26 27 28 29 8 7 6 5 64 VDD 63 NC 62 VSS 61 MP 60 PF0/PWM0 59 PF1/PWM1 58 PF2/PWM2 57 PF3/PWM3 56 PF4/PWM4/SCL0 55 PF5/PWM5/SCL1 54 PF6/PWM6/SDA0 53 PF7/PWM7/SDA1 52 BLK 51 R D1 14 4 A7 15 D2 15 3 A12 50 G 16 GND 16 49 B NC 17 D3 48 VSYNC 2 A15 1 NC 18 32 VDD 31 A12 47 HSYNC 30 A13 46 EXLC 45 XLC 44 PE0/INT0 43 PE1/INT1 42 PE2/AN0 41 PE3/AN1 A7/D7 40 PE4/AN2 39 PE5/AN3 38 PE6/PWM 37 PE7/TO RST 17 PC6 18 D4 19 PC5 19 D5 20 25 A6/D6 A8 PD7/EC 13 12 11 10 9 A5/D5 A9 24 A4/D4 A11 PC0 A2/D2 OE 23 A3/D3 NC PC1 A1/D1 A10 22 A0/D0 CE PC2 D7 21 D6 PC3 21 22 23 24 25 26 27 28 29 NC 20 For custom font RD PC4 PD5/ACI A6 A14 PC7 PD6/RMC A5 31 13 12 11 10 9 PB2 A4 19 OE 13 D4 NC PB3 VDD A2 12 32 A3 PB4 18 A10 11 A15 NC D6 PB5 2 1 For custom font D0 10 A2 A12 16 PB6 A1 3 17 9 A0 15 NC PB7 NC D2 GND 8 5 A7 5 PA0 6 4 PA3 7 7 14 4 PA1 8 D1 PA4 PA2 A3 3 A1 PA5 13 12 11 10 9 CE 2 A0 PA6 D7 1 NC PA7 D0 CXP85290A Pin Assignment: Evaluator Mode (Top View) 64 pin PSDIP Package 8 7 6 5 WR 14 4 26 SYNC 15 3 A12 GND 16 2 A15 NC 17 1 NC C2 18 32 VDD C1 19 31 A14 36 RST 20 30 A13 35 EXTAL 34 XTAL 33 PD0/INT2 27 PD4/HSI 28 PD3/SI 29 PD2/SO 30 For programming Note) A8 A9 A11 NC HALT 32 A10 VSS E/P 31 I/T PD1/SCK MON 21 22 23 24 25 26 27 28 29 1. NC (Pin 63) is always connected to VDD. 2. Vss (Pins 32 and 62) are always connected to GND. 3. MP (Pin 61) is always connected to GND. –7– CXP85200A/85290A EPROM Read Timing (Ta = –20 to +75°C, VDD = 4.5 to 5.5V, VSS = 0V) Item Symbol Pin Address → data input delay time tACC A0 to A15 D0 to D7 Address → data hold time tIH A0 to A15 D0 to D7 Min. Max. Unit 250 ns 0 ns 0.8VDD A0 to A15 Address data 0.2VDD tACC tIH 0.8VDD D0 to D7 Input data 0.2VDD Product List Product Piggyback/evaluator RAM capacity CXP85232A CXP85228A CXP85224A CXP85200A-U01S CXP85200A-U03S CXP85290A-U01S CXP85200A-U01Q CXP85200A-U03Q 64 pin ceramic PSDIP/PQFP 64 pin plastic SDIP/QFP Package ROM capacity CXP85220A CXP85116B Optional item CXP85112B Mask 12K 16K 20K 24K 28K 32K bytes bytes bytes bytes bytes bytes 352 bytes EPROM 32K bytes 448 bytes 448 bytes Reset pin pull-up resistor Existent/non existent Existent Power-on reset circuit Existent/non existent Existent Font data 64 pin ceramic PSDIP User data Fixed –8– Fixed (European Font) EPROM 4K bytes CXP85200A/85290A CXP85200A Piggyback mode/evaluator mode switching process is as follows. LCC type EPROM CXP85200A CPU probe Pin 1 mark Pin 1 index EPROM Pin 1 indicated Note) Evaluator mode Piggyback mode Pin 1 index DIP type EPROM Note) The evaluator mode cap should be connected to the CPU probe. –9– CXP85200A/85290A CXP85290A Piggyback mode/evaluator mode switching process is as follows. LCC type EPROM CXP85290A CPU probe EPROM Pin 1 indicated Pin 1 index Two EPROMs for custom font (Both have the same contens.) Note) The evaluator mode cap should be connected to the CPU probe. Pin 1 mark Piggyback mode Evaluator mode – 10 – CXP85200A/85290A Package Outline Unit: mm + 0.05 0.25 – 0.02 64PIN PSDIP (CERAMIC) 750mil 58.9 ± 0.55 33 32 2.54 ± 0.25 1.27 ± 0.25 0.46 ± 0.08 3.43 ± 0.38 9.8 MAX 1 19.05 ± 0.25 15.24 18.75 ± 0.25 64 1.778 ± 0.1 0.9 PACKAGE STRUCTURE PACKAGE MATERIAL CERAMIC SONY CODE PSDIP-64C-01 LEAD TREATMENT GOLD PLATING EIAJ CODE ADIP064-C-0750-A LEAD MATERIAL 42 ALLOY PACKAGE WEIGHT 16.0g JEDEC CODE 64PIN PQFP (CERAMIC) PIN No. 1 INDEX 18.7 ± 0.5 INDEX PIN No.1 INDEX 16.3 ± 0.2 64 51 1.0 ± 0.05 1 64 51 1 33 19 14.22 18.12 ± 0.2 12.02 1.05 0.7 0.4 ± 0.08 0.3 6.0 1.27 ± 0.13 4.5 22.3 ± 0.25 32 9.48 0.75 20 1.3 ± 0.3 33 19 32 20 0.6 0.9 11.66 15.58 ± 0.2 PACKAGE STRUCTURE PACKAGE MATERIAL PQFP-64C-L02 LEAD TREATMENT GOLD PLATING EIAJ CODE AQFP064-C-0000-B LEAD MATERIAL 42 ALLOY PACKAGE WEIGHT 5.2g 9.8 MAX + 0.05 0.15 – 0.02 CERAMIC SONY CODE JEDEC CODE 3.57 ± 0.36 24.7 ± 0.5 52 52 – 11 – CXP85200A/85290A 64PIN PSDIP (CERAMIC) 70.98 ± 0.55 15.58 ± 0.2 19.05 ± 0.25 18.12 ± 0.2 32 + 0.05 0.25 – 0.02 1 18.57 ± 0.25 33 18.12 ± 0.2 64 1.27 ± 0.13 1.27 ± 0.25 0.46 ± 0.08 1.778 ± 0.1 0.9 3.43 ± 0.38 11.24 MAX PIN NO.1 INDEX PACKAGE STRUCTURE PACKAGE MATERIAL CERAMIC SONY CODE PSDIP-64C-02 LEAD TREATMENT GOLD PLATING EIAJ CODE ADIP064-C-0750-B LEAD MATERIAL 42 ALLOY PACKAGE WEIGHT 22.8g JEDEC CODE – 12 –