Keysight N8840A Usb power delivery electrical and protocol Datasheet

Keysight N8840A
USB Power Delivery Electrical and Protocol
Compliance Test Software
For Infiniium Oscilloscopes
Data Sheet
02 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
This application is available in the following license variation:
–– Fixed to an oscilloscope
Easily Run USB Power Delivery Compliance and Validation
Tests Using Your Infiniium Oscilloscopes
The Keysight Technologies, Inc. N8840A USB power delivery (PD) electrical and protocol
compliance test software for Infiniium oscilloscopes gives you a fast, easy way to validate and
debug your USB power delivery provider, consumer, dual-role device, and eMaker cable. USB
power delivery electrical and protocol compliance test software allows you to automatically
execute a USB Type-C power delivery compliance test plan for host/device and eMarker cable,
and see the results in a comprehensive report format (.pdf, .csv, and .xml).
Features
USB PD electrical and protocol compliance software offers several features for design
validation:
–– Conforms to the latest USB-IF USB PD specification and test plan
–– Performs electrical physical layer (BMC-PHY) tests
–– Performs protocol layer (BMC-PROT) tests
–– Performs power state (BMC-POW) tests
–– Fully automates all tests required for USB PD certification
–– Supports a full range of USB-PD devices test – provider, consumer, dual-role device and
eMarker cable
–– Automatically saves all waveforms for further analysis and debug
–– Fully automates the USB PD compliance test process from product registration to
certification approval
Using USB PD compliance software, you can perform required USB PD compliance test in your
lab for everyday debugging and shorten your product development time.
03 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Simple Test Setup Connections
Depending on the unit under test (UUT) type, the N8840A software provides a simple
connection diagram for each of test.
Supported UUT types
–– Consumer only
–– Provider/consumer
–– Consumer/provider
–– Cable
–– DRP
–– Provider only
Figure 1. Test set up diagram provided by USB-PD software.
04 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Simple Test Setup Connections (Continued)
Simplify configuration setup with capabilities identification
Keysight N8840A USB PD compliance software provides a comprehensive way to determine
what kind of power data object (PDO) it is supporting, without needing the product capabilities
profile that is typically provide by the developer.
If specific capabilities of UUT are unknown, the software verifies the UUT’s capabilities with the
USB PD controller. This function helps prevent UUT damage during testing.
For example, if the provider UUT’s maximum current is entered as 3 A, and the UUT actually
supports 1.5 A, test gear will perform 3 A load test for this UUT and it will probably destroy
UUT. However, using the software’s capabilities check feature before testing prevents such
testing since the reading capabilities do not support that power profile.
Figure 2. Device information of UUT.
Figure 3. Power capabilities of UUT.
05 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Solid Test Results
Software can be tested using live signals from an oscilloscope as well as saved waveforms.
N8840A provides a convenient way to share test results with other teams or team members to
streamline efforts to identify the root of issues. It helps you confidently launch reliable products
and get to market quickly.
By using a real oscilloscope and an advanced software-based BMC clock recovery algorithm,
N8840A USB PD compliance software provides the most accurate bi-phase marking coding
(BMC) eye diagram with UUT’s built-in self-test (BIST) waveform. This helps ensure the
accuracy of signal integrity for UUT.
Selectable test items
Oscilloscope-based solution
Test items configured by the device information feature eliminates
the need to test item parameters.
On-screen acquisition of data allows you to easily assess how
well a UUT works.
06 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Comprehensive Protocol Decoding Function
N8840A USB Type-C power delivery software provides compliance test results and a protocol
decoding function of the configuration channel (CC) line signal. These capabilities give you
more insight into test results and help you debug issues faster.
Both Packet decoder mode and
Compliance mode support.
Protocol packet decode supporting
Packet decode of BMC signals makes PHY testing on a new
waveform or acquired waveform easy.
Protocol packet detail
Detailed protocol packet information is provided on specific
packets. This example shows source support for three types of
power data objects (PDOs) and shows specific PDO[2] and PDO[3]
detail.
07 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Report Generating
N8840A supports three report formats: .csv (comma separated value), XML, and PDF. This
makes it easy to share result with several ways. Reports generated for saved packet lists can be
printed for each test item, providing a helpful reference when the cause of test failures need to
be located.
Report generation
Supporting .csv, XML, and PDF formats, N8840A makes it easy
to generate test reports and see saved waveforms and results so
debugging test results can be reviewed.
Test result
Easy-to-understand test reports show details of results including
the description of test item pass/fail criteria and the visualized
BMC eye diagram test result so you can have confidence in the
results.
08 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Software Ordering Information
USB PD electrical and protocol compliance test software
Fixed
User-installed
N8840A-1TP
Order Configuration
eMarker cable test
(Requires scope configuration and common configuration)
Scope configuration
1. S-Series
Product name
Any bandwidth of S-Series scope
N2873A
Description
S-Series oscilloscope
Passive probe (included in scope)
Qty
1
2
Description
V-Series oscilloscope
High impedance adopter and passive probe
Qty
1
2
Description
9000 Series oscilloscope
Passive probe (included in scope)
Qty
1
2
Description
90000 Series oscilloscope
High impedance adopter and passive probe
Qty
1
2
Description
Q-Series oscilloscope
High impedance adopter and passive probe
Qty
1
2
Description
Z-Series oscilloscope
High impedance adopter and passive probe
Qty
1
2
2. V-Series
Product name
Any model of V-Series scope
N5449A
3. 9000 Series
Product name
Any model of 9000 Series scope
N2873A
4. 90000 Series
Product name
Any model of 90000 Series scope
E2697A
5. Q-Series
Product name
Any model of Q-Series scope
N5449A
6. Z-Series
Product name
Any model of Z-Series scope
N5449A
09 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Order Configuration (Continued)
Common configuration for eMarker cable
Product name
N8840A
N6705B (optional)
N6752A (optional)
Coupon (optional)
PD controller
Series
S-Series
Description
PD compliance software
Modular power supply frame
Power supply module
Test fixture
Power delivery controller
Scope
Probe
x1
9000 Series
Qty
1
1
1
1
1
Additional products
N8840A x 1
N2873A x 2 (included)
x1
N6705B x 1
V-Series
x1
Q-Series
N6752A x 1
N5449A x 2
PD coupon x1
x1
Z-Series
PD controller x 1
x1
90000 Series
x1
N2697A x 2
10 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Order Configuration (Continued)
Provider test
(Requires scope configuration and common configuration)
Scope configuration
1. S-Series
Product name
Any bandwidth of S-Series scope
N2873A
1147A/N2893A
Description
S-Series oscilloscope
Passive probe (included in scope)
Current probe
Qty
1
2
1
Description
V-Series oscilloscope
High impedance adopter and passive probe
Current probe
Qty
1
3
1
Description
9000 Series oscilloscope
Passive probe (included in scope)
Current probe
Qty
1
2
1
Description
90000 Series oscilloscope
High impedance adopter and passive probe
Current probe
Current probe power supply
Qty
1
3
1
1
Description
Q-Series oscilloscope
High impedance adopter and passive probe
Current probe
Qty
1
3
1
Description
Z-Series oscilloscope
High impedance adopter and passive probe
Current probe
Qty
1
3
1
2. V-Series
Product name
Any model of V-Series scope
N5449A
1147A/N2893A
3. 9000 Series
Product name
Any model of 9000 Series scope
N2873A
1147A/N2893A
4. 90000 Series
Product name
Any model of 90000 Series scope
E2697A
N2782B/N2893B
N2279A
5. Q-Series
Product name
Any model of Q-Series scope
N5449A
1147A/N2893A
6. Z-Series
Product name
Any model of Z-Series scope
N5449A
1147A/N2893A
11 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Order Configuration (Continued)
Common configuration for provider
Product name
N8840A
N3301A
N3303A
82357B
Coupon (optional)
PD controller
Series
S-Series
Description
PD compliance software
eLoad frame
eLoad module
USB-GPIB interface
Test fixture
Power delivery controller
Scope
Qty
1
1
1
1
1
1
Probe
Additional products
N2873A x 2 (included)
x1
9000
Series
1147A or N2893A x 1
x1
N3301A x 1
V-Series
x1
Q-Series
N8840A x 1
N5449A x 3
N3303A x 1
x1
Z-Series
82357B x1
x1
90000
Series
PD coupon x1
N2697A x 3
x1
N2782B + N2279A
PD controller x 1
12 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Order Configuration (Continued)
Consumer test
(Requires scope configuration and common configuration)
Scope configuration
1. S-Series
Product name
Any bandwidth of S-Series scope
N2873A
Description
S-Series oscilloscope
Passive probe (included in scope)
Qty
1
2
Description
V-Series oscilloscope
High impedance adopter and passive probe
Qty
1
2
Description
9000 Series oscilloscope
Passive probe (included in scope)
Qty
1
2
Description
90000 Series oscilloscope
High impedance adopter and passive probe
Qty
1
2
Description
Q-Series oscilloscope
High impedance adopter and passive probe
Qty
1
2
Description
Z-Series oscilloscope
High impedance adopter and passive probe
Qty
1
2
2. V-Series
Product name
Any model of V-Series scope
N5449A
3. 9000 Series
Product name
Any model of 9000 Series scope
N2873A
4. 90000 Series
Product name
Any model of 90000 Series scope
E2697A
5. Q-Series
Product name
Any model of Q-Series scope
N5449A
6. Z-Series
Product name
Any model of Z-Series scope
N5449A
13 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Order Configuration (Continued)
Common configuration for consumer
Product name
N8840A
N6705B (optional)
N6752A (optional)
Coupon (optional)
PD controller
Series
S-Series
Description
PD compliance software
Modular power supply frame
Power supply module
Test fixture
Power delivery controller
Scope
Probe
x1
9000 Series
Qty
1
1
1
1
1
Additional products
N8840A x 1
N2873A x 2 (included)
x1
N6705B x 1
V-Series
x1
Q-Series
N6752A x 1
N5449A x 2
PD coupon x1
x1
Z-Series
PD controller x 1
x1
90000 Series
x1
N2697A x 2
14 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Order Configuration (Continued)
Dual-role device
(Requires scope configuration and common configuration)
Scope configuration
1. S-Series
Product name
Any bandwidth of S-Series scope
N2873A
1147A/N2893A
Description
S-Series oscilloscope
Passive probe (included in scope)
Current probe
Qty
1
2
1
Description
V-Series oscilloscope
High impedance adopter and passive probe
Current probe
Qty
1
3
1
Description
9000 Series oscilloscope
Passive probe (included in scope)
Current probe
Qty
1
2
1
Description
90000 Series oscilloscope
High impedance adopter and passive probe
Current probe
Current probe power supply
Qty
1
3
1
1
Description
Q-Series oscilloscope
High impedance adopter and passive probe
Current probe
Qty
1
3
1
Description
Z-Series oscilloscope
High impedance adopter and passive probe
Current probe
Qty
1
3
1
2. V-Series
Product name
Any model of V-Series scope
N5449A
1147A/N2893A
3. 9000 Series
Product name
Any model of 9000 Series scope
N2873A
1147A/N2893A
4. 90000 Series
Product name
Any model of 90000 Series scope
E2697A
N2782B/N2893B
N2279A
5. Q-Series
Product name
Any model of Q-Series scope
N5449A
1147A/N2893A
6. Z-Series
Product name
Any model of Z-Series scope
N5449A
1147A/N2893A
15 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Order Configuration (Continued)
Common configuration for DRD
Product name
N8840A
N3301A
N3303A
82357B
N6705B (optional)
N6752A (optional)
Coupon (optional)
PD controller
Series
S-Series
Description
PD compliance software
eLoad frame
eLoad module
USB-GPIB interface
Modular power supply frame
Power supply module
Test fixture
Power delivery controller
Scope
Probe
x1
Additional products
N2873A x 2 (included)
9000
Series
1147A or N2893A x 1
x1
x1
N8840A x 1
N3301A x 1
V-Series
Q-Series
Qty
1
1
1
1
1
1
1
1
N5449A x 3
N3303A x 1
x1
Z-Series
82357B x1
x1
90000
Series
PD coupon x1
x1
N2697A x 3
N2782B + N2279A
PD controller x 1
16 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
Related Literature
Publication title
Infiniium 90000 Series Oscilloscopes - Data Sheet
Infiniium 9000 Series Oscilloscopes - Data Sheet
Infiniium Z-Series Oscilloscopes - Data Sheet
Infiniium S-Series High-Definition Oscilloscopes - Data Sheet
Infiniium V-Series Oscilloscopes - Data Sheet
N7015A and N7016A Type-C Test Fixtures - Data Sheet
N8837A USB-PD Protocol Triggering and Decode for Infiniium Series Oscilloscopes - Data Sheet
Publication number
5989-7819EN
5990-3746EN
5991-3868EN
5991-3904EN
5992-0425EN
5992-1073EN
5992-1207EN
17 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. Keysight is a founding member of the AXIe consortium.
ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of
the PCI Industrial Computer Manufacturers Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the
Web inside your test systems. Keysight is a founding member of the LXI
consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Download your next insight
Keysight software is downloadable expertise.
From first simulation through first customer
shipment, we deliver the tools your team needs
to accelerate from data to information to
actionable insight.
–– Electronic design automation (EDA)
software
–– Application software
–– Programming environments
–– Utility software
Learn more at
www.keysight.com/find/software
Start with a 30-day free trial.
www.keysight.com/find/free_trials
18 | Keysight | N8840A USB Power Delivery Electrical and Protocol Compliance Test Software - Data Sheet
From Hewlett-Packard through Agilent to Keysight
For more than 75 years, we‘ve been helping you unlock measurement insights. Our
unique combination of hardware, software and people can help you reach your next
breakthrough. Unlocking measurement insights since 1939.
1939
THE FUTURE
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s committed to superior product quality and lower total cost
of ownership. Keysight is the only test and measurement company with
three-year warranty standard on all instruments, worldwide. And, we provide
a one-year warranty on many accessories, calibration devices, systems and
custom products.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure your
instruments are operating to specification, so you can rely on accurate
measurements.
Keysight Infoline
www.keysight.com/find/service
Keysight’s insight to best in class information management. Free access to
your Keysight equipment company reports and e-library.
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-02-10-16)
DEKRA Certified
ISO9001 Quality Management System
www.keysight.com/find/n8840a
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2016
Published in USA, May 9, 2016
5992-1463EN
www.keysight.com
Similar pages