DATA SHEET BC807-16-25-40 SEMICONDUCTOR H General Purpose Transistors PNP Silicon MAXIMUM RATINGS Symbol Value Unit Collector–Emitter Voltage V CEO –45 V Collector–Base Voltage V CBO –50 V Emitter–Base Voltage V –5.0 V –500 mAdc Rating Collector Current — Continuous EBO IC SOT–23 (TO–236AB) 3 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit 225 1.8 556 mW mW/°C °C/W R θJA 300 2.4 417 mW mW/°C °C/W T J , T stg –55 to +150 °C Total Device Dissipation FR– 5 Board, (1) TA = 25°C Derate above 25°C PD Thermal Resistance, Junction to Ambient Total Device Dissipation Alumina Substrate, (2) TA = 25°C Derate above 25°C R θJA PD Thermal Resistance, Junction to Ambient Junction and Storage Temperature 1 2 3 COLLECTOR 1 BASE 2 EMITTER DEVICE MARKING BC807–16 = 5A1; BC807–25 = 5B1; BC807–40 = 5C1 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit V (BR)CEO –45 — — V V (BR)CES –50 — — V V (BR)EBO –5.0 — — V (VCB = –20 V) — — –100 nA (VCB = –20 V, T J = 150°C) — — –5.0 µA OFF CHARACTERISTICS Collector–Emitter Breakdown Voltage (IC = –10 mA) Collector–Emitter Breakdown Voltage (VEB = 0, I C = –10µA) Emitter–Base Breakdown Voltage (IE = –1.0 µA) Collector Cutoff Current I CBO 1. FR–5 = 1.0 x 0.75 x 0.062 in. 2. Alumina = 0.4 x 0.3 x 0.024 in. 99.5% alumina. http://www.yeashin.com 1 REV.02 20150128 ELECTRICAL CHARACTERISTICS BC807-16-25-40 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Typ Max Unit BC807–16 100 — 250 BC807–25 BC807–40 160 250 — — 400 600 40 — — V CE(sat) — — –0.7 V V — — –1.2 V fT 100 — — MHz C obo — 10 — pF ON CHARACTERISTICS DC Current Gain (IC= –100 mA, VCE = –1.0 V) h FE (IC = –500 mA, VCE = –1.0 V) Collector–Emitter Saturation Voltage (IC = –500 mA, IB = –50 mA) Base–Emitter On Voltage BE(on) — (IC = –500 mA, IB= –1.0 V) SMALL–SIGNAL CHARACTERISTICS Current–Gain — Bandwidth Product (IC = –10 mA, VCE = –5.0 Vdc, f = 100 MHz) Output Capacitance (VCB = –10 V, f = 1.0 MHz) http://www.yeashin.com 2 REV.02 20150128 PACKAGE OUTLINE & DIMENSIONS BC807-16-25-40 SOT-23 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M,1982 A L 2. CONTROLLING DIMENSION: INCH. 3 1 V 2 G C D H K J MILLIMETERS MIN MAX 2.80 3.04 A MIN 0.1102 INCHES MAX 0.1197 B C 0.0472 0.0350 0.0551 0.0440 1.20 0.89 1.40 1.11 D G H 0.0150 0.0701 0.0005 0.0200 0.0807 0.0040 0.37 1.78 0.013 0.50 2.04 0.100 J K 0.0034 0.0070 0.085 0.177 0.0140 0.0285 0.35 0.69 L S V 0.0350 0.0830 0.0177 0.0401 0.1039 0.0236 0.89 2.10 0.45 1.02 2.64 0.60 DIM B S 0.037 0.95 0.037 0.95 0.079 2.0 0.035 0.9 0.031 0.8 http://www.yeashin.com inches mm 3 REV.02 20150128