PPTC/K16 Series Features Applications Radial leaded Devices Almost anywhere there is a low voltage Cured,flame retardant epoxy polymer power supply, up to DC30V and a load insulating material meets UL94V-0 to be protested, including: requirements Personal computer Bulk packaging,or tape and reel Medical electronics available on most models Peersonal care product Fig1 Product dimensions(mm) Model K16-300 K16-400 K16-500 K16-600 K16-700 K16-800 K16-900 K16-1000 K16-1100 K16-1200 K16-1300 K16-1400 Fig 1 1 1 1 1 1 1 1 1 1 1 1 A(max) 9.0 10.0 10.7 13.5 13.5 13.5 15.0 18.0 18.0 22.5 24.0 24.0 B(max) 12 13 17.5 17.5 23 23 24 26 26 25 30 30 C(max) 3 3 3 3 3 3 3 3 3 3 3 3 D(typ) 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 10.2 10.2 10.2 Physical Characteristcs ALL Test Passive aging Humidity aging Thermal shock Resistance to solvent Vibration Storage conditions:-40℃ to 85℃ Material:Leads Tin plated copper,20AWG,0.80mm Environmental Specifications conditions ＋85℃,100hts ＋85℃,85%R.H.,100hrs ＋125℃,to-55℃,10times MIL-STD-202,Method 215 MIL-STD-202,Method 201 Resistance change ±8% typical ±8% typical ±12% typical No change No change REV.2014.05.01 01 | www.spsemi.cn PPTC/K16 Series Model Ihold Itrip Vmax K16-300 K16-400 K16-500 K16-600 K16-700 K16-800 K16-900 K16-1000 K16-1100 K16-1200 K16-1300 K16-1400 (A) 3 4 5 6 7 8 9 10 11 12 13 14 (A) 6 8 10 12 14 16 18 20 22 24 26 28 (Vdc) 16 16 16 16 16 16 16 16 16 16 16 16 Ihold Itrip Vmax Imax Pd Rmin/max R1max Electrical characteristics(25℃) Imax Pd max Maximum Time To Trip Current Time (A) (w) (A) (S) 100 2.3 9 15 100 2.4 12 15 100 2.6 15 15 100 2.8 18 15 100 3.0 21 15 100 3.0 24 15 100 3.3 27 25 100 3.7 30 30 100 3.7 33 30 100 4.2 36 30 100 4.2 39 50 100 4.2 40 50 Rmin (mΩ) 20 20 14 10 8 6 4 4 3 3 3 3 Resistance Rmax R1max (mΩ) (mΩ) 60 80 40 60 25 33 21 31 15 20 13 18 12 16 11 15 9 13 8 11 8 11 7 10 Hold Current:Maximum current device will not trip in 25℃ still air. Trip current:Minimum current at which the device will always trip in 25℃ still air Maximum operating volatge device can withstand without damage at ratde current(imax). Maximum fault current device can withstand without damage at rated voltage(Vmax). Typical power dissipatde from device when in the tripped state in 25℃ still air. Minimum/Maximum device resistance prior to tripping at 25℃. Maximum resistance of device at 25℃ measured one hour after trippde tripping. *CAUTION Operation beyond the specified rating may result in damage and possible arcing. Thermal Derating Chart-IH(A) Maximum ambidnt operating temperatures(℃) -40 -20 0 25 40 50 60 4.4 4.0 3.6 3.0 2.6 2.4 2.1 K16-300 K16-400 5.9 5.3 4.8 4.0 3.5 3.2 2.8 K16-500 7.3 6.6 6.0 5.0 4.4 4.0 3.6 K16-600 8.8 8.0 7.2 6.0 5.2 4.8 4.2 K16-700 10.3 9.3 8.4 7.0 6.2 5.6 5.0 K16-800 11.7 10.7 9.6 8.0 6.9 6.4 5.6 K16-900 13.2 11.9 10.7 9.0 7.9 7.2 6.4 14.7 13.3 12.0 10.0 8.7 8.0 7.0 K16-1000 16.1 14.6 13.1 11.0 9.7 8.8 7.8 K16-1100 17.6 16.0 14.4 12.0 10.4 9.6 8.4 K16-1200 20.5 18.7 16.8 14.0 12.1 11.2 9.8 K16-1400 Typical Time-To-Trip Curve At 25°C Thermal Derating Curve Part number Average Time Current Curves 0.75A 80 1.4 1.9 2.4 2.8 3.3 3.7 4.2 4.7 5.2 5.6 6.5 Derating Curves for K16 Series 0.90A 1000 70 1.9 2.5 3.1 3.8 4.4 5.1 5.6 6.3 6.9 7.6 8.9 1.8 1.35A Time In Seconds 100 1.60A 1.85A 10 2.50A 3.00A 4.00A 1 5.00A 6.00A 0.1 7.00A 8.060A 9.00A 0.01 1 10 Current In Amperes 100 10.0A 11.0A 14.0A Percentage of Derating Current 1.10A 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 80 Temperature (C°) 15.0A 16.0A Bulk: K16-300～800 K16-900 K16-1000～1400 REV.2014.05.01 Package Information 1000pcs per bag 500pcs per bag 200pcs per bag 02 | www.spsemi.cn