TaNFilm® Precision DIP Network Commercial and MIL Qualified 1900 Series • Inherent reliability • MIL-PRF-83401 qualified • Custom configuration available • Bonded leads not susceptible to solder reflow problems • Absolute tolerance to ±0.1% / ratio tolerance to ±0.05% • Absolute TCR to ±15ppm/°C / ratio tracking to ±5ppm/°C The IRC 1900 Series is the ultimate combination of precision performance, reliability, and long term stability in a low profile, TaNFilm® DIP package. Rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride insure superior ongoing performance over the installed life of the part. Visit our website to view a graphical demonstration of IRC’s TaNFilm® reliability and performance features. Electrical Data Schematic A Commercial A Military B Commercial B Military Resistance Range (Ω) Absolute Tolerance Optional Ratio Tolerance Absolute TCR (ppm/°C) Tracking TCR (ppm/°C) 10 - 49.9 F, G, J F, G ±50; ±100; ±300 ±20 50.0 - 199 F, G, J D, F, G ±25; ±50; ±100; ±300 ±10 200 - 999 B, D, F, G, J A, B, D, F, G ±25; ±50; ±100; ±300 ±5 1.0K - 400K B, D, F, G, J A, B, D, F, G ±15; ±25; ±50; ±100; ±300 ±5 50 - 100K B, D, F, G, J N/A N/A N/A 50 - 149 B, D, F, G, J B, D, F, G ±300; ±100 ±50 150 - 249 B, D, F, G, J B, D, F, G ±300; ±100; ±50 ±20 250 - 999 B, D, F, G, J B, D, F, G ±25; ±50; ±100; ±300 ±5 1.0K - 200K B, D, F, G, J B, D, F, G ±15; ±25; ±50; ±100; ±300 ±5 50 - 70K B, D, F, G, J N/A N/A N/A Military Characteristic Element Power (mW) N/A 200 H, K, M N/A 100 H, K, M Package Specification Data Schematic Package Power (W) 14-pin 16-pin A 1.4 1.6 B 1.3 1.5 Voltage Rating Temperature Range Substrate _____ √ PxR not to exceed 100V -55°C to +150°C 99.6% Alumina Lead Finish Noise Gold Plate (60/40 Sn/Pb available) <-30dB General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc 1900 Series Issue January 2009 Sheet 1 of 3 TaNFilm® Precision DIP Network Commercial and MIL Qualified Environmental Data MIL-PRF-83401 Limits (Delta R%) TaNFilm Test Data (Delta R%) Test Per MIL-PRF-83401 M K H Max Typical Thermal Shock And Power Conditioning 0.7 0.7 0.5 0.10 0.02 Low Temperature Operation 0.5 0.25 0.1 0.1 0.02 Short-term Overload 0.5 0.25 0.1 0.05 0.02 Terminal Strength 0.25 0.25 0.25 0.1 0.02 Resistance To Solder Heat 0.25 0.25 0.1 0.1 0.02 Moisture Resistance 0.5 0.5 0.4 0.1 0.02 Shock 0.25 0.25 0.25 0.1 0.02 Vibration 0.25 0.25 0.25 0.1 0.02 Life 2.0 0.5 0.5 0.1 0.02 High Temperature Exposure 1.0 0.5 0.2 0.1 0.02 Low Temperature Storage 0.5 0.25 0.1 0.1 0.02 25°C Double Load 2.0 0.5 0.5 0.05 0.02 Physical Data A ±0.020 No. Pins IRC Model Number Std Mil Spec Style Hi Rel Mil Style Dim. A 14 198x 01 13 0.700" 16 199x 02 14 0.800" 0.250″ ±0.010 SEATING PLANE +0.015 0.135″ -0.010 0.105″ ±0.020 0.020″ MAX MENISCUS 0.080″ MAX 0.025″ ±0.005 +0.015 0.135″ -0.010 0.050″ ±0.015 0.020″ ±0.001 Typ. 0.100″ ±0.005 Typ. Non-Cumulative © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 0.050″ ±0.003 0.205″ 0.010″ +0.015 -0.010 0.300″ 0.010″ +0.001 1900 Series Issue January 2009 Sheet 2 of 3 TaNFilm® Precision DIP Network Commercial and MIL Qualified Schematic Data 16 8 15 14 14 13 13 12 12 11 11 10 10 9 9 16 8 15 14 13 12 11 10 14 9 12 11 10 9 8 R1 R1 1 2 16 15 1 2 R1 1 3 2 4 3 5 4 6 5 7 6 8 7 1 2 3 4 5 6 7 1 8 Model 1998 RZ020, RZ140 Schematic B Model 1987 RZ010, RZ130 Schematic B DIP 1999 03 1001 3 4 5 6 7 13 13 12 12 1111 10 10 9 9 8 13 24 53 64 7 5 8 6 7 MIL Screened Ordering Data (MIL-PRF-83401) B F Model 1987 = 14-pin DIP, schematic B, gold terminations 1987SD = 14-pin DIP, schematic B, 60/40 Sn/Pb terminations 1989 = 14-pin DIP, schematic A, gold terminations 1989SD = 14-pin DIP, schematic A, 60/40 Sn/Pb terminations 1998 = 16-pin DIP, schematic B, gold terminations 1998SD = 16-pin DIP, schematic B, 60/40 Sn/Pb terminations 1999 = 16-pin DIP, schematic A, gold terminations 1999SD = 16-pin DIP, schematic A, 60/40 Sn/Pb terminations Prefix M83401 01 K 1001 F A Specification Sheet 01 = 14-pin DIP 02 = 16-pin DIP 13 = 14-pin HI REL DIP 14 = 16-pin HI REL DIP Characteristic M, K, H Resistance Absolute TCR 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C; 11 = ±15ppm/°C Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω Resistance Absolute Tolerance Standard 4-digit MIL resistance code Example: 1001 = 1000Ω; 50R0=50Ω J = ±5%; G = ±2%; F = ±1.0%; D = ±0.5%; B = ±0.1% Absolute Tolerance Schematic A = Isolated; B = Bussed Schematic J = ±5%; G = ±2%; F = ±1.0%; D = ±0.5%; B = ±0.1% Optional Ratio Tolerance to R1 Standard lead termination is gold plate. Contact factory for optional 60/40 Sn/Pb solder dip finish. F = ±1.0%; D = ±0.5%; C = ±0.25%; B = ±0.1%; A = ±0.05% Custom schematics and screening available. Screening available for non-QPL values and tolerances. Contact factory for ordering information. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 16 15 1 2 R1 Model 1999 RZ020, RZ140 Schematic A Model 1989 RZ010, RZ130 Schematic A Commercial Ordering Data Prefix 2 1414 R1 R1 R1 7 13 1900 Series Issue January 2009 Sheet 3 of 3