MCC omponents 21201 Itasca Street Chatsworth !"# $ % !"# Features • • • • • • For Surface Mount Applications Extremely Low Thermal Resistance High Temp Soldering: 250°C for 10 Seconds At Terminals Super Fast Recovery Times For High Efficiency Gull Wing Lead Bend To Prevent Arcing Perfect For Ballast, Television And Monitor Applications ER1VG 1 Amp Super Fast Recovery Silicon Rectifier 1400 Volts Maximum Ratings • • • DO-215AA (SMBG) (Round Lead) Operating Temperature: -50°C to +150°C Storage Temperature: -50°C to +150°C Maximum Thermal Resistance; 15°C/W Junction To Lead MCC Part Number Device Marking ER1VG ER1V Maximum Recurrent Peak Reverse Voltage 1400V Maximum RMS Voltage 980V H Cathode Band Maximum DC Blocking Voltage 1400V J C A Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time Typical Junction Capacitance IF(AV) 1.0A TJ = 55°C IFSM 30A 8.3ms, half sine E D F B G VF 2.2V IFM = 1.0A; TJ = 25°C* IR 5µA 30µA TJ = 25°C TJ = 125°C DIMENSIONS DIM A B C D E F G H J INCHES MIN .075 .078 .002 --.015 .065 .245 .160 .130 MM MIN 1.90 1.98 .05 --.38 1.65 6.22 4.06 3.30 MAX .116 .087 .008 .02 .03 .084 .276 .180 .151 MAX 2.95 2.21 .20 .51 .76 2.13 7.00 4.57 3.83 SUGGESTED SOLDER PAD LAYOUT 0.190” Trr 100ns CJ 45pF IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V 0.125” *Pulse test: Pulse width 200 µsec, Duty cycle 2% www.mccsemi.com 0.070” NOTE