Cree® PLCC6 3-in-1 SMD LED CLP6C-RKW/AKW Data Sheet These SMD LEDs are packaged in an industry-standard PLCC6 package. These high-reliability and high-brightness LEDs are designed to work in a wide range of environmental conditions and are ideally suited for use in illumination applications. Their wide viewing angle makes these LEDs ideally suited for channel-letter or general-backlighting and illumination applications. The flat-top emitting surface makes it easy for these LEDs to mate with light pipes. FEATURES APPLICATIONS • Size (mm): 6.0 x 5.0 • Light Strip • Color and Typical Dominant Wavelength (nm): »» Red (618-630) »» Amber (584-596) • Channel Letter • Backlight Luminous Intensity (mcd): »» CLP6C-RKW (3550-7100) »» CLP6C-AKW (3550-9000) • Viewing Angle: 120 degrees • Lead-Free • RoHS-Compliant 0 D-CT1183.00 Data Sheet: CL • Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current IF 3 x 80 mA IFP 3 x 200 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 240 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient RTHJA 3 x 250 °C/W Junction/Solder Point RTHJS 3 x 150 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD Peak Forward Current Note Class 2 Note: 1. Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Color Symbol Condition Unit Forward Voltage Red/Amber VF IF = 50 mA V Reverse Current Red/Amber IR VR = 5 V μA Dominant Wavelength Luminous Intensity 50% Power Angle Minimum Maximum 2.4 3.0 10 Red λD IF = 3 x 50 mA nm 618 624 630 Amber λD IF = 3 x 50 mA nm 584 591 596 Red IV IF = 3 x 50 mA mcd 3550 4800 Amber IV IF =3 x 50 mA mcd 3550 5000 Red/Amber 2θ½ IF = 3 x 50 mA deg Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 Typical CLD-CT1183.000 120 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Intensity Bin Limit (IF = 3 x 50 mA) Red (CLP6C-RKW) Amber (CLP6C-AKW) Bin Code Min. (mcd) Max. (mcd) Bin Code Min. (mcd) Max. (mcd) Yb 3550 4500 Yb 3550 4500 Z0 4500 5600 Z0 4500 5600 A0 5600 7100 A0 5600 7100 B0 7100 9000 Tolerance of measurement of luminous intensity is ±10%. Color Bin Limit (IF = 3 x 50 mA) Red Amber Bin Code Min. (nm) Max. (nm) Bin Code Min. (nm) Max. (nm) RA 618 630 AA 584 596 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Order Code Table* Red Luminous Intensity (mcd) Color Kit Number Viewing Angle Red CLP6C-RKW-CYbA0AA3 Red CLP6C-RKW-CZ0A0AA3 Color Kit Number Viewing Angle Amber CLP6C-AKW-CYbB0AA3 Amber CLP6C-AKW-CZ0B0AA3 Dominant Wavelength Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) 120 3550 7100 RA 618 RA 630 120 4500 7100 RA 618 RA 630 Amber Luminous Intensity (mcd) Dominant Wavelength Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) 120 3550 9000 AA 584 AA 596 120 4500 9000 AA 584 AA 596 Notes: • The above kit numbers represent order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin codes and single colorbin codes will not be orderable. • Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. • Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs (RELATIVE LUMINOUS INTENSITY) IF (mA) 100.0 2.5 2.0 80.0 60.0 Red 1.5 Yellow Red 40.0 1.0 20.0 0.5 0.0 1.8 2.0 2.2 2.6 2.4 VF(V) 2.8 Yellow 0.0 0 20 40 60 80 IF(mA) 100 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. (RELATIVE LUMINOUS INTENSITY) Vr(V) -50 -40 -30 -20 -10 0 0 -10 -20 80% Amber 40% -40 20% VS. REVERSE VOLTAGE. IF(mA) Rth j-s=150 C/W Red 60% -30 -50 Ir(uA) FIG.3 RED &YELLOW REVERSE CURRENT 100 100% 0% 300 400 500 600 700 WL(nm) 800 900 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 50% Power Angle : 120 (RELATIVE LUMINOUS INTENSITY) 0 1.0 80 60 0.5 40 Rth j-a=250 C/W 20 0 0 20 40 60 80 Ta( C) 100 FIG.5 RED &YELLOW MAXIMUM FORWARD DCCURRENT VS AMBIENT TEMPERATURE (Tjmax=110 C) 0 -90 -60 -30 0 30 60 90 Angle FIG.6 FAR FIELD PATTERN The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 7 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Packaging • • • • • The boxes are not water-resistant, and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 900 pcs per reel. 10% 20% 30% 40% DANGEROUS DO NOT EAT DESICCANT 防潮 珠。 不可食 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 8 CLD-CT1183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps