TDK B32300A4001A880 Film capacitors power factor correction Datasheet

Film Capacitors – Power Factor Correction
DeltaCap Capacitors
Series/Type:
Ordering code:
MKDxxx-I-xx
B32300A*/ B32301A****A***/ B32301A****B***
Date:
Version:
May 2016
6
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left bar):
Film Capacitors – Power Factor Correction
Identification/Classification 2
(header 2 + bottom left header bar):
DeltaCap Capacitors
Ordering code: (top right header bar)
B32300A*/ B32301A****A***/ B32301A****B***
Series/Type: (bottom right header bar)
MKDxxx-I-xx
Preliminary data (optional):
(if necessary)
Department:
CAP FILM P PM PFC
Date:
May 2016
Version:
6
 EPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Film Capacitors – Power Factor Correction
DeltaCap Capacitors
B32300A*/ B32301A****A***/
B32301A****B***
MKDxxx-I-xx
Construction and general data




Dielectric: Polypropylene film
Non-PCB, Semi-dry biodegradable resin
Extruded round aluminum can with stud
Degree of protection: IP00 (optionally IP54 with
terminal cover; additional cable gland at cable entry
required)
Features
 Single-phase, provided with discharge resistors
 Double safety system:
overpressure disconnector, self-healing technology
 Naturally air cooled (or forced air cooling)
 Indoor mounting
Typical applications
 For Power Factor Correction
Terminals
 Fast-on terminals B32300A* series
 Screw terminals B32301A* series
Mounting
 Threaded stud at bottom of can
(max. torque for M12 = 10 Nm)
Technical data and specifications
Characteristics
Rated capacitance CR
According to specification table
Tolerance
–5 / +10%
Rated voltage VR
According to specification table
Rated frequency fR
50 and 60 Hz
Output
According to specification table
Rated current IR
According to specification table
CAP FILM P PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
May 2016
Page 2 of 9
Film Capacitors – Power Factor Correction
DeltaCap Capacitors
B32300A*/ B32301A****A***/
B32301A****B***
MKDxxx-I-xx
Maximum ratings
Vmax
VR + 10 % (up to 8 h daily) / VR + 15 % (up to 30 min daily) /
VR + 20 % (up to 5 min daily) / VR + 30 % (up to 1 min daily)
Imax
Up to 1.3 • IR (up to 1.5• IR including combined effects of harmonics,
overvoltages and capacitance tolerance)
IS
Up to 200 • IR (A)
*Power dissipation
≤ 0.2 W/kvar (dielectric) and ≤ 0.45 W / kvar (total)
* Without discharge resistor
Test data
VTT
2.15 • VR during 2 s
VTC
3000 V AC / 50 Hz during 10 s
*tan δ (50 Hz)
≤ 1.0 • 10-3
* Without discharge resistor
Climatic category –40/D
Tmin
-40 ºC
Tmax
+55 ºC
Storage temperature
-40 °C … +85 °C
Tmax Hotspot
+85 ºC
Humidity
Av. rel. < 95%
Degree of protection
IP00 (optionally IP54 with terminal cover; additional cable
gland at cable entry required)
Maximum altitude
4000 m
Mean life expectancy
Up to 135000 hours at temperature class -40/C
Up to 100000 hours at temperature class -40/D
Max. 5000 switchings per year acc. to IEC 60831
tLD
Design data
Dimensions (d × h)
According to specification table
Weight approx
According to specification table
Impregnation
Non PCB, resin filling: soft polyurethane resin
Fixing
Threaded bolt M12
Max. torque (Al can stud)
10 Nm
Mounting position
Only in the vertical position.
See “Maintenance and Installation Manual” for further details.
CAP FILM P PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
May 2016
Page 3 of 9
Film Capacitors – Power Factor Correction
DeltaCap Capacitors
B32300A*/ B32301A****A***/
B32301A****B***
MKDxxx-I-xx
Terminals
Maximum terminal current
IP00 for B32300 (optional IP54 with plastic terminal cap, additional
cable gland at cable entry required); IP20 for B32301
15 A (fast-on terminals) / 50 A (screw terminals)
Creepage distance (min)
12.7 mm
Clearance (min)
9.6 mm
Protection degree
Safety
Mechanical safety
Overpressure disconnector
Max. short circuit current
(AFC: 10 kA according UL 810 standard)
Discharge resistor time
≤ 60 s to 75 V or less
Reference standards
IEC 60831–1/2, UL 810-5th edition
Label design
CAP FILM P PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
May 2016
Page 4 of 9
Film Capacitors – Power Factor Correction
B32300A*/ B32301A****A***/
B32301A****B***
MKDxxx-I-xx
DeltaCap Capacitors
Ordering codes
Type
50 Hz
60 Hz
CR
d×h
Weight Ordering code
Output IR
kvar
A
Output IR
kvar
A
µF
mm
kg
Rated voltage 230 V AC, 50/60 Hz, single phase
MKD230-I-0.8
0.8
3.5
1.0
4.2
48
63.5 x 64.5
0.3
B32300A2002A830
12
MKD230-I-1.7
1.7
7.4
2.0
8.9
102
63.5 x 102
0.4
B32300A2012A730
12
MKD230-I-2.5
2.5
10.9
3.0
13.1
151
63.5 x 127
0.5
B32300A2022A530
12
Packing
unit
pcs
Rated voltage 250 V AC, 50/60 Hz, single phase
MKD250-I-0.8
0.8
3.2
1.0
3.8
41
50 x 77
0.2
B32300A2002A850
50
MKD250-I-1.7
1.7
6.8
2.0
8.2
87
63.5 x 92
0.4
B32300A2012A750
12
MKD250-I-2.0
2.0
7.8
2.4
9.4
100
63.5 x 92
0.4
B32300A2022A050
12
MKD250-I-2.5
2.5
10.0
3.0
12.0
127
63.5 x 102
0.5
B32300A2022A550
12
MKD250-I-5.0
5.0
20.0
6.0
24.0
255
75 x 166
0.7
B32301A2052#050*
6
MKD250-I-7.5
7.5
30.0
9.0
36.0
382
85 x 196
1.1
B32301A2072#550*
4
MKD250-I-10
10.0
40.0
12.0
48.0
510
85 x 216
1.2
B32301A2102#050*
4
Rated voltage 400 V AC, 50/60 Hz, single phase
MKD400-I-0.8
0.8
2.0
1.0
2.4
16
50 x 64.5
0.2
B32300A4002A800
50
MKD400-I-1.7
1.7
4.3
2.0
5.2
34
63.5 x 62.5
0.3
B32300A4012A700
12
MKD400-I-2.5
2.5
6.3
3.0
7.6
50
63.5 x 77
0.3
B32300A4022A500
12
MKD400-I-3.3
3.3
8.3
4.0
10.0
66
63.5 x 102
0.4
B32300A4032A300
12
MKD400-I-4.2
4.2
10.5
5.0
12.6
84
63.5 x 102
0.4
B32300A4051A000
12
MKD400-I-5.0
5.0
12.5
6.0
15.0
100
63.5 x 127
0.5
B32300A4052A000
12
Rated voltage 415 V AC, 50/60 Hz, single phase
MKD415-I-0.8
0.8
1.9
1.0
2.3
15
50 x 64.5
0.2
B32300A4082A810
50
MKD415-I-1.7
1.7
4.0
2.0
4.8
31
63.5 x 64.5
0.3
B32300A4012A710
12
MKD415-I-2.5
2.5
6.0
3.0
7.2
46
63.5 x 102
0.4
B32300A4022A510
12
MKD415-I-3.3
3.3
8.0
4.0
9.6
61
63.5 x 102
0.4
B32300A4032A310
12
MKD415-I-5.0
5.0
12.0
6.0
14.4
92
63.5 x 127
0.6
B32300A4052A010
12
Rated voltage 440 V AC, 50/60 Hz, single phase
MKD440-I-0.7
0.7
1.6
0.8
1.9
12
50 x 64.5
0.2
B32300A4001A840
50
MKD440-I-1.4
1.4
3.2
1.7
3.8
23
63.5 x 64.5
0.3
B32300A4011A740
12
MKD440-I-2.1
2.1
4.8
2.5
5.8
35
63.5 x 77
0.3
B32300A4021A540
12
MKD440-I-2.8
2.8
6.4
3.4
7.7
46
63.5 x 102
0.4
B32300A4031A340
12
MKD440-I-3.3
3.3
7.5
4.0
9.0
54
63.5 x 102
0.4
B32300A4032A340
12
MKD440-I-4.2
4.2
9.5
5.0
11.4
69
63.5 x 127
0.5
B32300A4051A040
12
MKD440-I-5.0
5.0
11.4
6.0
13.7
82
63.5 x 127
0.5
B32300A4052A040
12
* Available either as B32301A****A*** series (2-terminal design, integrated resistor) or B32301A****B*** series (4-terminal design, pluggable
ceramic resistor). Please replace # with the right character before ordering.
CAP FILM P PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
May 2016
Page 5 of 9
Film Capacitors – Power Factor Correction
B32300A*/ B32301A****A***/
B32301A****B***
MKDxxx-I-xx
DeltaCap Capacitors
50 Hz
60 Hz
CR
d×h
Weight Ordering code
Output IR
kvar
A
Output IR
kvar
A
µF
mm
kg
Rated voltage 480 V AC, 50/60 Hz, single-phase
MKD480-I-0.7
0.7
1.5
0.8
1.8
10
50 x 64.5
0.2
B32300A4001A880
50
MKD480-I-1.4
1.4
2.9
1.7
3.5
19
63.5 x 64.5
0.3
B32300A4011A780
12
MKD480-I-2.1
2.1
4.4
2.5
5.3
29
63.5 x 77
0.3
B32300A4021A580
12
MKD480-I-2.8
2.8
5.8
3.4
7.0
39
63.5 x 102
0.4
B32300A4031A380
12
Type
Packing
unit
pcs
Rated voltage 525 V AC, 50/60 Hz, single-phase
MKD525-I-1.4
1.4
2.7
1.7
3.2
16
63.5 x 64.5
0.3
B32300A5011A720
12
MKD525-I-2.8
2.8
5.3
3.4
6.4
32
63.5 x 102
0.4
B32300A5031A320
12
MKD525-I-3.3
3.3
6.3
4.0
7.6
38
63.5 x 102
0.4
B32300A5032A320
12
MKD525-I-4.2
4.2
8.0
5.0
9.6
49
63.5 x 127
0.5
B32300A5051A020
12
MKD525-I-25.0
25.0
46.7
30.0
57.1
289
116 x 200
1.9
B32301A5252#025*
4
* Available either as B32301A****A*** series (2-terminal design, integrated resistor) or B32301A****B*** series (4-terminal design, pluggable
ceramic resistor). Please replace # with the right character before ordering.
Display of ordering codes for EPCOS products
The ordering code for one and the same EPCOS product can be represented differently in data sheets, data
books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order
confirmations and product labels. The varying representations of the ordering codes are due to different
processes employed and do not affect the specifications of the respective products. Detailed information
can be found on the Internet under www.epcos.com/orderingcodes
Important remark
Hereafter mentioned capacitors with the wildcard character “#” are available either with integrated resistors with
2 terminals (B32301*****A*** series) or with pluggable ceramic base discharge resistor with 4 terminals
(B32301*****B*** series).
The main difference between B32301A****A*** series and B32301A****B*** series is the way of assembling the
discharge resistor. The resistor of B32301A****A*** series is assembled inside of capacitor terminal cover, the
ceramic resistor of B32301A****B*** is plugged into the terminal pin.
CAP FILM P PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
May 2016
Page 6 of 9
Film Capacitors – Power Factor Correction
DeltaCap Capacitors
B32300A*/ B32301A****A***/
B32301A****B***
MKDxxx-I-xx
Dimensional drawings
B32300A*
B32301A****A***
CAP FILM P PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
B32301A****B***
May 2016
Page 7 of 9
Film Capacitors – Power Factor Correction
DeltaCap Capacitors
B32300A*/ B32301A****A***/
B32301A****B***
MKDxxx-I-xx
Cautions and Warnings
These figures apply to the capacitor alone. Because the fixing and the terminals may influence the
vibration properties, it is necessary to check stability when a capacitor is built in and exposed to
vibration. Irrespective of this, you are advised not to locate capacitors where vibration amplitude
reaches the maximum in strongly vibrating equipment.
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can
are avoided.
Grounding
The threaded bottom stud of the capacitor has to be used for grounding. In case grounding is done via
metal chassis that the capacitor is mounted to, the layer of varnish beneath the washer and nut should
be removed. The maximum tightening torque is 10 Nm.
Maintenance
 Check tightness of the connections/terminals periodically.
 Take current reading twice a year and compare with nominal current. Use a harmonic analyser or
true effective RMS-meter.
 In case of current above the nominal current check your application for modifications.
 If a significant increase in the amount of non-linear loads has been detected, then a consultant has
to be called in for a harmonic study.
 In case of the presence of harmonics installation of a de-tuned capacitor bank (reactors) must be
considered.
 Check the discharge resistors/reactors and in case of doubt, check their function:
(1) Power the capacitor up and down.
(2) After ≤ 60 seconds the voltage between the terminals must decline to less than 75 V.
 Check the temperature of capacitors directly after operation for a longer period, but make sure that
the capacitors have been switched off. In case of excessive temperature of individual capacitors, it
is recommended to replace these capacitors, as this should be an indication for loss factor
increase, which is a sign for reaching end of life.
Storage and operating conditions
Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas,
acid, alkali, salt or the like are present. In dusty environments regular maintenance and cleaning
especially of the terminals is required to avoid conductive path between phases and/or phases
and ground.
Note
For detailed information about PFC capacitors and cautions, refer to the latest version of EPCOS PFC
Product Profile.
CAP FILM P PM PFC
Please read Cautions and warnings and
Important notes at the end of this document.
May 2016
Page 8 of 9
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell,
MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries.
Further information will be found on the Internet at www.epcos.com/trademarks.
Page 9 of 9
Similar pages