3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP APBA3010ESGC Features HIGH EFFICIENCY RED SUPER BRIGHT GREEN Description 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide LOW POWER CONSUMPTION. Orange Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLRS AND LENS TYPES AVAILABLE. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF0736 REV NO: V.1 DATE: MAR/03/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203000795-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) APBA3010ESGC Viewing Angle Min. Typ. 4 12 4 12 WATER CLEAR SUPER BRIGHT GREEN (GaP) 2θ θ1/2 140° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Super Bright Green λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Super Bright Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Super Bright Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating / Storage Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF0736 REV NO: V.1 DATE: MAR/03/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203000795-01 APBA3010ESGC High Efficiency Red SPEC NO: DSAF0736 REV NO: V.1 DATE: MAR/03/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203000795-01 Super Bright Green APBA3010ESGC SPEC NO: DSAF0736 REV NO: V.1 DATE: MAR/03/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203000795-01 APBA3010ESGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength),the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAF0736 REV NO: V.1 DATE: MAR/03/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203000795-01