Model No. Rev. FYLD-5621A/BX-XX A PRODUCT SPECIFICATION Model No. ：FYLD-5621A/BX-XX Descriptions & Features: ■0.56 Inch (14.22mm) digit height, Double Digits SMD Display ■Qualified according to JEDEC moisture sensitivity Level 2a. ■RoHS compliant. ■Low current operation ■Low power consumption. ■Easy mounting on P.C. board. CUSTOMER APPROVED SIGNATURES APPROVED BY NINGBO FORYARD OPTOELECTRONICS CO.,LTD Add:NO.115 Qixin Road Ningbo Zhejiang China Tel: 0086-574-87933652 87927870 87922206 Fax: 0086-574-87927917 E-mail:[email protected] ( General) Http://www.foryard.com CHECKED BY PREPARED BY Zip:315051 Http://www.foryard.com Page ： 1/6 Model No. Rev. Model No. FYLD-5621A/BX-XX A ：FYLD-5621A/BX-XX ■ -XX: REF Surface / Epoxy color Color Number REF Surface Color Epoxy Color 0 1 2 ○ White ○ Black ○ Gray ○ Water Clear ○ White ○ Red 3 4 ○ Red ○ Green ○ Green ○ Yellow ■ Mechanical Dimensions Notes: 1. All dimensions are in millimeters (inches) 2. Dimension in millimeter [inch], tolerance is ±0.25 [.010] and angle is ±1° unless otherwise noted. ≤ 3. Bending Length*1%. 4.The specifications,characteristics and technical data described in the datasheet are subject to change without prior notice. Http://www.foryard.com Page ： 2/6 Model No. Rev. Model No. FYLD-5621A/BX-XX A ：FYLD-5621A/BX-XX ■All Light On Segments Feature & Pad Position ■ Internal Circuit Diagrams Http://www.foryard.com Page ： 3/6 FYLD-5621A/BX-XX A Model No. Rev. Model No. ：FYLD-5621A/BX-XX ■ Absolute maximum ratings (Ta=25 Parameter Symbol Test Condition VR IF Pd Ipeak Topr Tstr IR=30 — — Duty=0.1mS,1KHz — — Reverse Voltage Forward Current Power Dissipation Pulse Current Operating Temperature Storage Temperature Value Min Max 5 — — — -40 -40 — 30 100 150 +85 +85 ■ Electrical-Optical Characteristics ● Color Code & Chip Characteristics:(Test Condition:IF=20mA) Emitting Color Standard brightness H Red S Hi Red D Super Red E Orange A Amber Y Yellow G Green Dice Material Unit V mA mW mA ℃ ℃ (Ta=25 ℃) Spectral Luminous Forward Line Voltage(VF) Unit:V Intensity halfwidth(∆ (Iv) λ1/2) Unit:mcd Max Typ 700nm 90nm 660nm 20nm 650nm 20nm 625nm 35nm 610nm 35nm 590nm 35nm 570nm 10nm 430nm 460nm 60nm 470nm 520nm 36nm X=0.29,Y=0.30 CCT:9500K 2.00 1.80 1.90 1.90 1.90 1.90 1.90 3.40 2.80 2.80 2.80 2.80 2.50 2.50 2.50 2.50 2.50 2.50 2.50 4.40 3.80 3.80 3.80 3.80 1 15~20 26~38 14~20 13~18 13~18 14~18 0.7~1(mw) 6~12(mw) 6~12(mw) 4~6(mw) 20~30 640nm 20nm 635nm 20nm 625nm 20nm 610nm 20nm 590nm 20nm 570nm 30nm 520nm 36nm 505nm 36nm 460nm 30nm InGaN UB Ultra Blue 470nm 30nm InGaN X=0.29,Y=0.30 CCT:9500K UW Ultra White Segment-to-Segment Luminous Intensity ratio(Iv-M) 1.5:1 1.90 1.90 1.90 1.90 1.90 1.90 2.80 2.80 2.80 2.80 2.80 2.50 2.50 2.50 2.50 2.50 2.50 3.80 3.80 3.80 3.80 3.80 30~60 60~100 60~120 40~100~150 50~140~190 30~60~80 260~310 260~310 80~90~120 80~90~120 180~200 B Blue PG Pure Green W White Ultra brightness UHR Ultra Hi Red UR Ultra Red UE Ultra Orange UA Ultra Amber UY Ultra Yellow UG Ultra Green PG Ultra Pure Green BG Ultra Bluish Green GaP AlGaAs/SH AlGaAs/DH GaAsP GaAsP GaAsP GaP Peak Wave Length(λP) ℃) InGaN InGaN InGaN AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP InGaN InGaN Note: 1.Luminous Intensity is based on the Foryard standards. 2.Pay attention about static for InGaN Http://www.foryard.com Page ： 4/6 Spec. No. FYLD-5621A/BX-XX A Rev. Model No. ：FYLD-5621A/BX-XX ■ Precautions For Use - 1. Recommended Soldering conditions Wave Soldering 260(max.) Temperature(°C) 250 240 Preheat 105(max.) 0 5 sec. Max. 60sec. 2. Soldering Iron -1sec.). Basic SPEC. is 5sec. When 260 . If temperature is higher, time should be shorter (+10 Power dissipation of iron should be smaller than 15W,and temperature should be controllable. ≦ ℃ ℃→ ℃ ℃ Surface temperature of the device should be under 230 . 3. Rework : 1. Customer must finish rework within 5 sec under 260 . 2. The head of iron can not touch copper foil. ■ Soldering Pad Size Http://www.foryard.com Page ： 5/6 Model No. Rev. Model No. FYLD-5621A/BX-XX A ：FYLD-5621A/BX-XX ■ Reel Dimensions ■ Packing & Labe Specifications 500PCS/Reel FORYARD RoHS Part NO: FYLD-5621XX-XX Q'TY: 500 PCS Date:xxxx/xx/xx PASS QC QC: xxxxxxxxxx 1 Reel/ Box 39.0 OUTSIDE LABEL .0 32 FORYARD O PT OE LE CT RO NI CS 0 . 8 3 www.foryard.com 7 Boxes/Carton FORYARD O PT OEL ECT RO NIC S LED PN:FYLD-5621XX-XX Qty:3500 PCS Date:xxxx/xx/xx PASS GW: xx KG QC: QC NW: xx xxxxxxxxxx KG RoHS ATTENTION OUTSIDE LABEL Note: The specifications are subject to change without notice. Please contact us for updated information. Http://www.foryard.com Page ： 6/6