TOS 020016 www.vishay.com Vishay Draloric RF Power Barrel Capacitors with Screw Terminals, Class 1 and Class 2 Ceramic FEATURES • Small size • Geometry minimizes inductance, optimizes voltage withstand and maximizes heat radiation APPLICATIONS • Industrial and medical RF power supply • Small broadcasting equipment • Antenna couplers • Induction heating equipment CAPACITANCE RANGE QUICK REFERENCE DATA 10 pF to 2.5 nF DESCRIPTION Ceramic Class Ceramic Dielectric VALUE 1 2 C0G, U2J, N5600 X7R, Y5U Type Voltage (Vp) TOS 020016 7500 7500 Min. Capacitance (pF) 10 400 Max. Capacitance (pF) 300 2500 Mounting CAPACITANCE TOLERANCE • Class 1: ± 10 % • Class 2: ± 20 % CERAMIC DIELECTRICS • Class 1: C0G, U2J, N5600 • Class 2: XR7, Y5U Screw terminal RATED VOLTAGE MATERIAL Capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. Connection terminals: thread terminal, brass, silver plated. Allowable torque: 1.47 Nm (13 lbf in) FINISH Capacitor body completely protective lacquered. MARKING Type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo. 7.5 kVDC DIELECTRIC STRENGTH TEST 150 % of rated voltage (8000 VRMS, 50 Hz, 3 minutes) DISSIPATION FACTOR • C0G, U2J: max. 0.05 % (1 MHz) • N5600: max. 0.20 % (1 MHz) • X7R, Y5U: max. 2.5 % (1 kHz) INSULATION RESISTANCE • C0G, U2J, N5600, X7R: min. 100 000 M (at 25 °C) • Y5U: min. 50 000 M (at 25 °C) OPERATING TEMPERATURE RANGE Revision: 25-Feb-16 • Class 1: -55 °C to +100 °C • Class 2: -55 °C to +85 °C Document Number: 22086 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TOS 020016 www.vishay.com Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVDC) MAX. POWER RATING (1) MAX. CURRENT RATING 1.0 MHz (kvar) 10 MHz (kvar) 30 MHz (kvar) 1.0 MHz (ARMS) 10 MHz (ARMS) 30 MHz (ARMS) BS020016VZ10036AC1 10 1.7 10 10 0.3 2.5 4.3 BS020016VZ15036AC1 15 3.2 10 10 0.6 3.1 5.3 25 4.4 10 10 0.8 4.0 6.9 30 5.3 10 10 1.0 4.4 7.5 BS020016VZ40036AC1 40 7.0 10 10 1.3 5.1 8.7 BS020016VZ50036AC1 50 8.8 10 10 1.7 5.6 9.7 75 10 10 7.0 2.2 6.9 10 100 10 10 5.3 2.5 7.9 10 150 5.0 5.0 3.5 2.2 6.9 10 10 BS020016VZ25036AC1 BS020016VZ30036AC1 BS020016VZ75036AL1 BS020016VZ10136AL1 C0G (NP0) U2J (N750) BS020016VZ15136AS1 BS020016VZ20136AS1 5.0 5.0 2.7 2.5 7.9 BS020016VZ30136AS1 N5600 200 300 5.0 5.0 1.8 3.1 9.7 10 BS020016VZ40138AT1 400 0.4 0.4 0.4 1.0 3.2 5.5 7.5 BS020016VZ50138AT1 500 0.4 0.4 0.4 1.1 3.6 6.1 BS020016VZ60138AU1 600 0.4 0.4 0.4 1.2 3.9 6.7 BS020016VZ80138AU1 X7R 800 0.4 0.4 0.4 1.4 4.5 7.8 1000 0.2 0.2 0.2 1.1 3.6 6.1 BS020016VZ15238AV1 1500 0.2 0.2 0.2 1.4 4.3 7.5 BS020016VZ20238BA1 2000 0.2 0.2 0.2 1.6 5.0 8.7 2500 0.2 0.2 0.2 1.8 5.6 9.7 BS020016VZ10238AV1 BS020016VZ25238BA1 Y5U Notes • # 14th to 15th digit: capacitance tolerance code ± 10 % = 36; ± 20 % = 38 • RoHS-compliant parts on request (1) The surface temperature during operation must not exceed +100 °C DIMENSIONS in millimeters (inches) max. Ø 21 (max. Ø 0.83) 6.0 (0.236) L2 max. = 6-32 UNC thread min. 4.8 (0.189) depth 16.0 ± 1.5 (0.630 ± 0.059) (1) L1 max. = 22.6 (0.890) (1) Note Dimension L1 and L2 will vary depending upon capacitance value (1) RELATED DOCUMENTS General Information Revision: 25-Feb-16 www.vishay.com/doc?22071 Document Number: 22086 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000