P/N ESLB-P540A M.Uchida DWN. DATE. ’04- 8- 17 DATA-No. 2MT43525 2 4.9-5.9GHz Band Chip Multilayer Band Pass Filter ESLB-P540A-[ ] BPF with Balun for W-LAN 1ST Sample DATA All the technical data and information contained herein are subject to change without notice. CONFIDENTIAL CONFIDENTIAL The Thecontents contentsofofthis thisdocument documentisisthe theproperty propertyofofHitachi HitachiMetals MetalsLtd. Ltd.and and may maynot notbe becommunicated communicatedtotoany anyother otherparty partyininany anyform formwithout withoutthe theprior prior written writtencontents contentsofofHitachi HitachiMetals MetalsLtd.. Ltd.. Page 1/4 Shape and Size 2 ma x 0. 2 0. 4 0. 35 0. 45 A-1 <BOTTOM> 4 2. 1 0. 25 1. 2 0. 25 0. 4 0. 35 0. 45 2. 0 2. 1 5 1 Unit (mm) <SIDE> <TOP> 2. 5 0. 2 Data-No.2MT43525 Rev.2 5 4 3 1 3 2 6 6 0. 3 0. 3 <SIDE> 1. 2 ma x 1: IN (Unbalance) 2: NC (or DC) 3: Out1 (balance) 4: Out2 (balance) 5,6: GND Foot Pattern 0. 15 0. 15 0. 3 0. 4 0. 35 0. 4 0. 3 2. 15 Specification Parameter Center Frequency(fo) Passband Width Insertion Loss V.S.W.R. (Unbalance Port) Unit (mm) Attenuation1 (at DC-2.5GHz) Attenuation2 (at 9.8-11.8GHz) Attenuation3 (at 14.7-17.7GHz) Phase balance Amplitude balance Impedance ratio Unit MHz MHz dB 5400 fo +/- 500 1.5 max dB 2.2 Max. dB 25 min dB 20 min dB 15 min deg. dB Ohm 180 +/- 15 1.5 max 50:50 or 50:100 50:50 50:100 ESLB-P540A-1 ESLB-P540A-2 1. 85 2. 55 Page 2/4 ESLB-P540A-1 1ST sample DATA Data-No.2MT43525 Rev.2 (Impedance ratio 50:50) Ins.Loss 205 0.5 2.0 200 dB(S(2,1))-dB(S(3,1)) m8 m7 -0.5 -1.0 -1.5 -2.0 -2.5 1.5 1.0 -0.5 -1.0 -1.5 -3.5 -2.5 5.00 5.25 m7 freq=4.900GHz dB(S(5,4))=-0.879 5.50 freq, GHz 5.75 6.00 6.25 6.50 195 190 185 m8 freq=5.900GHz dB(S(5,4))=-0.825 m15 180 m16 175 170 165 160 155 4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 4.50 6.50 m5 freq=4.900GHz dB(S(2,1))-dB(S(3,1))=0.452 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 freq, GHz freq, GHz V.S.W.R. 6.0 m6 0.0 -2.0 4.75 m5 0.5 -3.0 4.50 (phase(S(3,1)/S(2,1)*-j)+90) 2.5 0.0 dB(S(5,4)) Phase Balance Amplitude Balance 1.0 m15 freq=4.900GHz (phase(S(3,1)/S(2,1)*-j)+90)=176.668 m6 freq=5.900GHz dB(S(2,1))-dB(S(3,1))=-0.072 m16 freq=5.900GHz (phase(S(3,1)/S(2,1)*-j)+90)=173.809 5.5 4.5 Attenuation 4.0 0 3.5 3.0 2.5 -1 0 m9 2.0 m10 1.5 -2 0 1.0 4.50 4.75 5.00 m9 freq=4.900GHz VSWR1=1.972 5.25 5.50 freq, GHz 5.75 6.00 6.25 m10 freq=5.900GHz VSWR1=1.333 6.50 m26 m19 m20 -3 0 dB(S(7,6)) VSWR1 5.0 m22 m25 -4 0 m21 m25 freq=800.0MHz dB(S(7,6))=-39.444 -5 0 m21 freq=2.500GHz dB(S(7,6))=-45.450 -6 0 m22 freq=9.800GHz dB(S(7,6))=-36.123 m19 freq=14.70GHz dB(S(7,6))=-26.915 m20 freq=11.80GHz dB(S(7,6))=-32.434 m26 freq=17.70GHz dB(S(7,6))=-26.652 -7 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 freq, GHz Page 3/4 ESLB-P540A-2 1ST sample DATA Data-No.2MT43525 Rev.2 (Impedance ratio 50:100) Ins.Loss 1.0 2.0 0.0 1.5 m8 dB(S(2,1))-dB(S(3,1)) m7 -1.0 -1.5 -2.0 -2.5 -0.5 -1.0 -1.5 -2.5 5.25 m7 freq=4.900GHz dB(S(5,4))=-0.627 5.50 freq, GHz 5.75 6.00 6.25 6.50 m8 freq=5.900GHz dB(S(5,4))=-0.640 195 190 185 180 m15 175 m16 170 165 160 155 4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 4.50 4.75 5.00 5.25 freq, GHz m5 freq=4.900GHz dB(S(2,1))-dB(S(3,1))=0.483 V.S.W.R. 6.0 m6 0.0 -3.5 5.00 m5 0.5 -2.0 4.75 200 1.0 -3.0 4.50 205 (phase(S(3,1)/S(2,1)*-j)+90) 0.5 -0.5 dB(S(5,4)) Phase Balance Amplitude Balance 2.5 5.50 5.75 6.00 6.25 6.50 freq, GHz m15 freq=4.900GHz (phase(S(3,1)/S(2,1)*-j)+90)=173.665 m6 freq=5.900GHz dB(S(2,1))-dB(S(3,1))=0.346 m16 freq=5.900GHz (phase(S(3,1)/S(2,1)*-j)+90)=170.127 5.5 5.0 Attenuation 4.0 0 3.5 3.0 -1 0 2.5 2.0 m9 m10 1.5 -2 0 1.0 4.50 4.75 5.00 m9 freq=4.900GHz VSWR1=1.439 5.25 5.50 freq, GHz 5.75 6.00 6.25 m10 freq=5.900GHz VSWR1=1.410 6.50 m26 m19 m20 -3 0 dB(S(7,6)) VSWR1 4.5 m22 m25 -4 0 m21 m25 freq=800.0MHz dB(S(7,6))=-41.620 -5 0 m21 freq=2.500GHz dB(S(7,6))=-43.700 -6 0 m22 freq=9.800GHz dB(S(7,6))=-36.396 m19 freq=14.70GHz dB(S(7,6))=-28.406 m20 freq=11.80GHz dB(S(7,6))=-32.931 m26 freq=17.70GHz dB(S(7,6))=-26.822 -7 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 freq, GHz Page 4/4