VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 15 A FEATURES VS-MBR25..CT-1PbF VS-MBRB25..CTPbF • • • • • Base common cathode 2 Base common cathode 2 • • 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode D2PAK TO-262 • • • 150 °C TJ operation Center tap D2PAK and TO-262 packages Low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Guard ring for enhanced ruggedness and long term reliability Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Halogen-free according to IEC 61249-2-21 definition Compliant to RoHS directive 2002/95/EC AEC-Q101 qualified DESCRIPTION This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. PRODUCT SUMMARY IF(AV) 2 x 15 A VR 35 V/45 V IRM 40 mA at 125 °C MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES IF(AV) Rectangular waveform (per device) 30 IFRM TC = 130 °C (per leg) 30 VRRM IFSM tp = 5 μs sine VF 30 Apk, TJ = 125 °C TJ Range UNITS A 35/45 V 1060 A 0.73 V - 65 to 150 °C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM VS-MBRB2535CTPbF VS-MBR2535CT-1PbF VS-MBRB2545CTPbF VS-MBR2545CT-1PbF UNITS 35 45 V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current SYMBOL per leg per device Peak repetitive forward current per leg Non-repetitive peak surge current TEST CONDITIONS TC = 130 °C, rated VR IFRM Rated VR, square wave, 20 kHz, TC = 130 °C IFSM UNITS 15 IF(AV) 5 μs sine or 3 μs rect. pulse VALUES 30 Following any rated load condition and with rated VRRM applied 30 1060 Surge applied at rated load conditions halfwave, single phase, 60 Hz 150 A Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 2 A, L = 8 mH 16 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 μs Frequency limited by TJ maximum VA = 1.5 x VR typical 2 A Document Number: 94308 Revision: 16-Mar-10 For technical questions, contact: [email protected] www.vishay.com 1 VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Vishay High Power Products Schottky Rectifier, 2 x 15 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop VFM (1) Maximum instantaneous reverse current IRM (1) Threshold voltage VF(TO) TEST CONDITIONS 30 A TJ = 25 °C TJ = 25 °C 0.82 TJ = 125 °C 0.73 Rated DC voltage TJ = 125 °C VALUES TJ = TJ maximum 0.2 40 UNITS V mA 0.355 V 12.3 mΩ Forward slope resistance rt Maximum junction capacitance CT VR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C 700 pF Typical series inductance LS Measured from top of terminal to mounting plane 8.0 nH 10 000 V/μs VALUES UNITS Maximum voltage rate of change dV/dt Rated VR Note (1) Pulse width < 300 μs, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS Maximum junction temperature range TJ - 65 to 150 Maximum storage temperature range TStg - 65 to 175 Maximum thermal resistance, junction to case per leg RthJC DC operation 1.5 Typical thermal resistance, case to heatsink RthCS Mounting surface, smooth and greased 0.50 °C/W Approximate weight Mounting torque Marking device www.vishay.com 2 minimum maximum °C Non-lubricated threads 2 g 0.07 oz. 6 (5) kgf · cm (lbf · in) 12 (10) Case style D2PAK MBRB2545CT Case style TO-262 MBR2545CT-1 For technical questions, contact: [email protected] Document Number: 94308 Revision: 16-Mar-10 VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Schottky Rectifier, 2 x 15 A Vishay High Power Products 100 TJ = 150 °C TJ = 125 °C TJ = 25 °C 10 1 0.2 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 100 10 TJ = 150 °C 1 TJ = 125 °C TJ = 100 °C 0.1 TJ = 75 °C 0.01 TJ = 50 °C 0.001 TJ = 25 °C 0.0001 0.4 0.6 0.8 1.0 1.2 1.4 0 5 10 15 20 25 30 35 40 45 VR - Reverse Voltage (V) VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 °C 100 0 10 20 30 40 50 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 PDM t1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 94308 Revision: 16-Mar-10 For technical questions, contact: [email protected] www.vishay.com 3 VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series 14 150 Average Power Loss (W) Allowable Case Temperature (°C) Vishay High Power Products Schottky Rectifier, 2 x 15 A 140 DC 130 Square wave (D = 0.50) Rated VR applied 120 110 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 12 10 RMS limit 8 6 4 DC 2 See note (1) 0 100 0 4 8 12 16 20 0 24 5 10 15 20 25 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94308 Revision: 16-Mar-10 VS-MBRB25..CTPbF, VS-MBR25..CT-1PbF Series Schottky Rectifier, 2 x 15 A Vishay High Power Products ORDERING INFORMATION TABLE Device code VS- MBR 2 1 B 25 45 CT -1 3 4 5 6 7 1 - HPP product suffix 2 - Essential part number 3 - 4 - None = TO-262 7 = -1 Current rating (25 = 25 A) 5 - Voltage ratings 6 - CT = Essential part number 7 - 8 - B = D2PAK 7 TRL PbF 8 9 None 35 = 35 V 45 = 45 V None = D2PAK 3 =B -1 = TO-262 3 None None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 9 - PbF = Lead (Pb)-free (for TO-262 and D2PAK tube) P = Lead (Pb)-free (for D2PAK TRR and TRL) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95014 Part marking information www.vishay.com/doc?95008 Packaging information www.vishay.com/doc?95032 Document Number: 94308 Revision: 16-Mar-10 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1