February 12, 2007 SHIELDED SMD INDUCTOR DR358-3 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 4.1µH to 100.0µH Operating Temp. -20°C to +80°C Tinned Leads with Leaded Solder is Available (note 7) ELECTRICAL SPECIFICATIONS AT 25ºC Part No. DR358-3-412 DR358-3-542 DR358-3-622 DR358-3-892 DR358-3-103 DR358-3-123 DR358-3-153 DR358-3-183 DR358-3-223 DR358-3-273 DR358-3-333 DR358-3-393 DR358-3-473 DR358-3-563 DR358-3-683 DR358-3-823 DR358-3-104 Inductance (µH) ± 30% 4.1 5.4 6.2 8.9 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 DCR (Ω) Max. 0.057 0.076 0.096 0.116 0.124 0.153 0.196 0.210 0.290 0.330 0.386 0.520 0.595 0.665 0.840 0.978 1.200 I rated (A) Max. 1.95 1.60 1.40 1.25 1.20 1.10 0.97 0.85 0.80 0.75 0.65 0.57 0.54 0.50 0.43 0.41 0.36 MECHANICAL OUTLINES Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Inductance Test: 100kHz, 0.1Vrms 4. Irated for an approximate 40°C temperature rise 5. Irated for an approximate 35% drop maximum of the initial value 6. Tape and reel quantity, 2000 pcs/reel 7. For non-RoHS parts replace DR prefix with 42- (e.g. DR358-3 becomes 42-358-3) 8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C. DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.