MBRF3020CT THRU MBRF30100CT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 100 Volts ITO-220AB Forward Current - 30.0 Amperes FEATURES 4.5± 0.2 10.2± 0.2 High surge capacity. For use in low voltage, high frequency inverters,free wheeling,and polarity protection applications. Metal silicon junction,majority carrier conduction. High current capability,low forward voltage drop. Guard ring for over voltage protection. +0.2 -0.1 13.5± 0.5 φ 3 .3± 0.1 4.0± 0.3 φ 3 .2± 0.2 PIN 2 3 8.2± 0.2 1 16.5± 0.3 15.0± 0.5 3.1 2.6± 0.2 MECHANICAL DATA 1.4± 0.1 0.6± 0.1 Case: ITO-220AB molded plastic body Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight:0.060 ounce, 1.67 grams 0.6± 0.1 2.6± 0.15 PIN 1 PIN 2 PIN 3 CASE Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. MDD Catalog Number Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (see fig.1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 15.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction temperature range Storage temperature range SYMBOLS MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF 3020CT 3030CT 3040CT 3045CT 3050CT 3060CT 3070CT 3080CT 3090CT 30100CT VRRM VRMS VDC 20 14 20 30 21 30 45 32 45 50 35 50 70 49 70 60 42 60 80 56 80 90 100 63 70 90 100 VOLTS VOLTS VOLTS I(AV) 30.0 Amps IFSM 250.0 Amps VF 0.55 IR CJ RθJC TJ TSTG 0.75 0.85 1.0 15.0 50.0 500 750 2.0 -55 to +125 Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2.Thermal resistance from junction to case 40 28 40 UNITS -55 to +150 -55 to +150 Volts mA pF C/W C C FIG. 1- FORWARD CURRENT DERATING CURVE 30 24 18 Single Phase Half Wave 60Hz Resistive or inductive Load 12 6 MBRF3020CT-MBRF3045CT MBRF3050CT-MBRF30100CT 0 0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RATINGS AND CHARACTERISTIC CURVES MBRF3020CT THRU MBRF30100CT FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 300 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 250 200 150 100 175 50 1 10 AMBIENT TEMPERATURE, C INSTANTANEOUS FORWARD CURRENT,AMPERES 250 50 TJ=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE 0.5 MBRF3020CT-MBRF3045CT MBRF3050CT-MBRF3060CT MBRF3070CT-MBRF30100CT 0.05 0.2 0.4 0.6 0.8 1.0 FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 5 1.1 100 10 TJ=100 C 1 TJ=75 C 0.1 0.01 20 40 60 80 TJ=25 C 100 MBRF3020CT-MBRF3045CT MBRF3050CT-MBRF30100CT TRANSIENT THERMAL IMPEDANCE, C/W 2000 FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 0.1 0.01 0.1 1 10 10 0.1 1.0 10 REVERSE VOLTAGE,VOLTS 100 PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF TJ=25 C 0.001 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1000 100 NUMBER OF CYCLES AT 60 Hz 100 t,PULSE DURATION,sec. The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)! 100