TERMINAL BLOCKS 5mm PITCH VERTICAL MOUNT - LOW PROFILE 5.00mm pitch UL/CE approved Professional rising clamp Interlocking 1.5mm2 wire acceptance Colour green Rating 17.5A/250V SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Rising clamp: Screw/torque: 17.5A/250Volts >2KV >5MΩ -20°C to 125°C 160° UL94V-0 flame retardant nylon 66 Recommended PCB hole size: 10 OUTLINE DRAWING 10 ORDERING INFORMATION 10 15 10 10 2 2 2 10 10 3.5 3.5 2 3.5 5 3.5 3.5 5 2 5 ø1.3mm2 15 15 10 10 5 micron tinned nickel plated brass Nickel plated brass M3 Zinc steel/0.5Nm colour passivated and tropicalised 5 2 DBC TB 12 /2 Dubilier Connectors Series Style Nº of Ways 5 5 Terminal Block 4.05 0.5 0.5 4.05 3.5 5 5 8.1 5 * Other Number of ways are available up to 12 Please consult office for further details 0.5 4.05 8.1 2 = 2 ways 3 = 3 ways TERMINAL BLOCKS 5mm PITCH VERTICAL MOUNT 8.1 5.00mm pitch CE approved Professional rising clamp - Designed to prevent cable entry below clamp Colour green Interlocking 4.0mm2 wire acceptance Rating 24A/450V SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Rising clamp: Screw/torque: 24A/450Volts >2.5KV >5MΩ -20°C to 125°C 160° UL94V-0 flame retardant nylon 66 Recommended PCB hole size: 10 ORDERING INFORMATION 15 19 3.6 15 3.6 19 3.6 19 5 19 5 3.6 3.6 19 3.6 5 5 5 DBC TB 14 /2 Dubilier Connectors Series Style Nº of Ways 5 Terminal Block 5 52.9 5 5 5 5 5 5 0.9 11.2 5 0.9 5.5 0.9 5.5 2 = 2 ways 3 = 3 ways * Other Number of ways are available up to 12 Please consult office for further details 5.5 11.2 373 11.2 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 18 10 19 ø1.3mm2 15 OUTLINE DRAWING 10 5 micron tinned nickel plated brass Nickel plated brass M3 Zinc steel/0.5Nm, colour passivated and tropicalised