OSRAM LSA676 Hyper sideled Datasheet

Hyper SIDELED®
Hyper-Bright LED
LS A676, LA A676, LO A676, LY A676
Besondere Merkmale
Features
• Gehäusetyp: weißes SMT Gehäuse
• Besonderheit des Bauteils: Abstrahlung
parallel zur Platine, deshalb ideal zur
Einkopplung in Lichtleiter
• Wellenlänge: 633 nm (super-rot),
615 nm (amber), 606 nm (orange),
587 nm (gelb)
• Abstrahlwinkel: Lambertscher Strahler (120°)
• Technologie: InGaAlP
• optischer Wirkungsgrad: 11 lm/W (gelb,
orange, amber), 7 lm/W (super-rot)
• Gruppierungsparameter: Lichtstärke,
Wellenlänge
• Verarbeitungsmethode: für alle
SMT-Bestücktechniken geeignet
• Lötmethode: IR Reflow Löten und
Wellenlöten (TTW)
• Vorbehandlung: nach JEDEC Level 2
• Gurtung: 12 mm Gurt mit 2000/Rolle,
ø330 mm
• package: white SMT package
• feature of the device: radiation direction
parallel to PCB, so an ideal LED for coupling in
light guides
• wavelength: 633 nm (super-red), 615 (amber),
606 nm (orange), 587 nm (yellow)
• viewing angle: Lambertian Emitter (120°)
• technology: InGaAlP
• optical efficiency: 11 lm/W (yellow, orange,
amber), 7 lm/W (super-red)
• grouping parameter: luminous intensity,
wavelength
• assembly methods: suitable for all
SMT assembly methods
• soldering methods: IR reflow soldering and
TTW soldering
• preconditioning: acc. to JEDEC Level 2
• taping: 12 mm tape with 2000/reel, ø330 mm
Anwendungen
Applications
• optischer Indikator
• Einkopplung in Lichtleiter
• Hinterleuchtung (LCD, Schalter, Tasten,
Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
• Innenbeleuchtung im Automobilbereich (z.B.
Instrumentenbeleuchtung, u.ä.)
• Markierungsbeleuchtung (z.B. Stufen,
Fluchtwege, u.ä.)
• Signal- und Symbolleuchten
• optical indicators
• coupling into light guides
• backlighting (LCD, switches, keys, displays,
illuminated advertising, general lighting)
• interior automotive lighting. (e.g. dashboard
backlighting, etc.)
• marker lights (e.g. steps, exit ways, etc.)
• signal and symbol luminaire
2002-04-03
1
LS A676, LA A676, LO A676, LY A676
Lichtstärke
Lichtstrom
Bestellnummer
Luminous
Intensity
IF = 20 mA
IV (mcd)
Luminous
Flux
IF = 20 mA
ΦV (mlm)
Ordering Code
35.5 ... 71.0
56.0 ... 140.0
150 (typ.)
280 (typ.)
Q62703-Q5074
Q62703-Q5075
colorless clear
71.0 ... 140.0
112.0 ... 280.0
310 (typ.)
560 (typ.)
Q62703-Q4972
Q62703-Q4973
orange
colorless clear
71.0 ... 140.0
112.0 ... 280.0
310 (typ.)
560 (typ.)
Q62702-Q5032
Q62702-Q5033
yellow
colorless clear
56.0 ... 112.0
90.0 ... 224.0
240 (typ.)
440 (typ.)
Q62703-Q5111
Q62703-Q5112
Typ
Emissionsfarbe
Type
Color of
Emission
LS A676-N2P2-1
LS A676-P2R1-1
super-red
colorless clear
LA A676-Q1R1-1
LA A676-R1S2-1
amber
LO A676-Q1R1-24
LO A676-R1S2-24
LY A676-P2Q2-26
LY A676-Q2S1-26
Farbe der
Lichtaustrittsfläche
Color of the
Light Emitting
Area
Anm.: -1 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 4)
-24 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
-26 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe,
die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich.
In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten.
Note: -1 Total color tolerance range, delivery in single groups (please see page 4)
-24 Total color tolerance range, delivery in single groups (please see page 5)
-26 Total color tolerance range, delivery in single groups (please see page 5)
The standard shipping format for serial types includes a lower or upper family group of 3 or 4
individual groups. Individual half groups are not available.
No packing unit / tape ever contains more than one luminous intensity half group.
2002-04-03
2
LS A676, LA A676, LO A676, LY A676
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
LS, LO, LA LY
Betriebstemperatur
Operating temperature range
Top
– 55 … + 100
°C
Lagertemperatur
Storage temperature range
Tstg
– 55 … + 100
°C
Sperrschichttemperatur
Junction temperature
Tj
+ 100
°C
Durchlassstrom
Forward current
IF
30
mA
Stoßstrom
Surge current
t ≤ 10 µs, D = 0.005
IFM
Sperrspannung
Reverse voltage
VR
3
V
Leistungsaufnahme
Power consumption
Ptot
80
mW
530
K/W
300
K/W
Wärmewiderstand
Thermal resistance
Rth JA
Sperrschicht/Umgebung
Junction/ambient
Rth JS
Sperrschicht/Lötpad
Junction/solder point
Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2)
mounted on PC board FR 4 (pad size ≥ 16 mm 2)
2002-04-03
3
1
0.2
A
LS A676, LA A676, LO A676, LY A676
Kennwerte (TA = 25 °C)
Characteristics
Bezeichnung
Parameter
Symbol
Symbol
Werte
Values
Einheit
Unit
LS
LA
LO
LY
Wellenlänge des emittierten Lichtes
Wavelength at peak emission
IF = 20 mA
(typ.)
λpeak
645
622
610
591
nm
Dominantwellenlänge 1)
Dominant wavelength 1)
IF = 20 mA
(typ.)
λdom
633
±6
615
±6
606
587
nm
+3/–6
+8/–7
Spektrale Bandbreite bei 50 % Irel max
Spectral bandwidth at 50 % Irel max
IF = 20 mA
(typ.)
∆λ
16
16
16
15
nm
Abstrahlwinkel bei 50 % IV (Vollwinkel)
Viewing angle at 50 % IV
(typ.)
2ϕ
120
120
120
120
Grad
deg.
Durchlassspannung 2)
Forward voltage 2)
IF = 20 mA
(typ.)
(max.)
VF
VF
2.0
2.4
2.0
2.4
2.0
2.4
2.0
2.4
V
V
Sperrstrom
Reverse current
VR = 3 V
(typ.)
(max.)
IR
IR
0.01 0.01 0.01 0.01 µA
µA
10
10
10
10
Temperaturkoeffizient von λpeak
Temperature coefficient of λpeak
IF = 20 mA; –10°C ≤ T ≤ 100°C
(typ.)
TCλpeak
0.14 0.13 0.13 0.13 nm/K
Temperaturkoeffizient von λdom
Temperature coefficient of λdom
IF = 20 mA; –10°C ≤ T ≤ 100°C
(typ.)
TCλdom
0.01 0.06 0.07 0.10 nm/K
Temperaturkoeffizient von VF
Temperature coefficient of VF
IF = 20 mA; –10°C ≤ T ≤ 100°C
(typ.)
TCV
– 2.0 – 1.8 – 1.7 – 2.5 mV/K
Optischer Wirkungsgrad
Optical efficiency
IF = 20 mA
(typ.)
ηopt
7
11
11
11
lm/W
1)
Wellenlängen werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of ±1 nm.
2)
Spannungswerte werden mit einer Stromeinprägedauer von 1 ms und einer Genauigkeit von ±0,1 V ermittelt.
Voltages are tested at a current pulse duration of 1 ms and a tolerance of ±0.1 V.
2002-04-03
4
LS A676, LA A676, LO A676, LY A676
1)
Wellenlängengruppen / Wavelength groups
Gruppe
Group
yellow
orange
min.
max. min.
Einheit
Unit
max.
2
580
583
600
603
nm
3
583
586
603
606
nm
4
586
589
606
609
nm
5
589
592
nm
6
592
595
nm
Helligkeits-Gruppierungsschema
Luminous Intensity Groups
Lichtgruppe
Luminous Intensity Group
Lichtstärke
Luminous Intensity
IV (mcd)
N2
P1
P2
Q1
Q2
R1
R2
S1
S2
35.5 ... 45.0
45.0 ... 56.0
56.0 ... 71.0
71.0 ... 90.0
90.0 ... 112.0
112.0 ... 140.0
140.0 ... 180.0
180.0 ... 224.0
224.0 ... 280.0
Lichtstrom
Luminous Flux
ΦV (mlm)
120 (typ.)
150 (typ.)
190 (typ.)
240 (typ.)
300 (typ.)
380 (typ.)
480 (typ.)
600 (typ.)
760 (typ.)
Helligkeitswerte werden mit einer Stromeinprägedauer von 25 ms und einer Genauigkeit von ±11 % ermittelt.
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ±11 %.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: P2-3
Example: P2-3
Lichtgruppe
Luminous Intensity Group
Halbgruppe
Half Group
Wellenlänge
Wavelength
P
2
3
2002-04-03
5
LS A676, LA A676, LO A676, LY A676
Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 20 mA
Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit
Standard eye response curve
OHL00235
100
Irel
%
80
Vλ
60
yellow
orange
amber
super-red
40
20
0
400
450
500
550
600
650
nm
700
λ
Abstrahlcharakteristik Irel = f (ϕ)
Radiation Characteristic
40˚
30˚
20˚
10˚
0˚
ϕ
50˚
OHL01660
1.0
0.8
0.6
60˚
0.4
70˚
0.2
80˚
0
90˚
100˚
1.0
2002-04-03
0.8
0.6
0.4
0˚
20˚
6
40˚
60˚
80˚
100˚
120˚
LS A676, LA A676, LO A676, LY A676
Durchlassstrom IF = f (VF)
Forward Current
TA = 25 °C
Relative Lichtstärke IV/IV(20 mA) = f (IF)
Relative Luminous Intensity
TA = 25 °C
OHL00232
10 2
mA
5
OHL00233
10 1
IV
I V (20 mA)
IF
10 0
10 1
5
5
10 -1
5
super-red
yellow
orange/amber
10 0
10 -2
5
5
10 -1
1
1.4
1.8
2.2
2.6
10 -3 -1
10
3 V 3.4
5 10 0
5 10 1
VF
IF
Maximal zulässiger Durchlassstrom IF = f (T)
Max. Permissible Forward Current
Relative Lichtstärke IV/IV(25 °C) = f (TA)
Relative Luminous Intensity
IF = 20 mA
OHL01296
35
mA 10 2
OHL00238
IV 2.0
I F mA
IV (25 ˚C)
30
1.6
orange
yellow
amber
super-red
TS
25
1.2
20
15
0.8
TA
10
0
0.4
TA temp. ambient
TS temp. solder point
5
0
20
40
60
0
-20
80 ˚C 100
0
20
40
60
˚C 100
TA
T
2002-04-03
orange
yellow
amber
super-red
7
LS A676, LA A676, LO A676, LY A676
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
LS, LA, LO
IF
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
LY
OHL00318
100
A
IF
5
5
D=
0.005
0.01
0.02
0.05
0.1
0.2
0.5
10-1
100
A
OHL00316
tP
tP
IF
D= T
T
D=
0.005
0.01
0.02
0.05
0.1
0.2
0.5
10-1
5
5
tP
D= T
tP
IF
T
10-2 -5
10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
10-2 -5
10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
tp
tp
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 85 °C
LS, LA, LO
IF
100
A
5
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 85 °C
LY
OHL01414
t
D = TP
tP
IF
IF
100
A
5
T
OHL01415
tP
D= T
tP
IF
T
D=
10
-1
5
0.005
0.01
0.02
0.05
0.1
0.2
0.5
10-1
5
10-2 -5
10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
0.005
0.01
0.02
0.05
0.1
0.2
0.5
10-2 -5
10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
tp
2002-04-03
D=
tp
8
LS A676, LA A676, LO A676, LY A676
Maßzeichnung
Package Outlines
1.1 (0.043)
Anode
(1.4 (0.055))
(R1)
4.2 (0.165)
3.8 (0.150)
3.8 (0.150)
3.4 (0.134)
(2.9 (0.114))
Cathode marking
(2.85 (0.112))
0.9 (0.035)
(0.3 (0.012))
Cathode
2.54 (0.100)
spacing
0.7 (0.028)
4.2 (0.165)
3.8 (0.150)
2.4 (0.094)
2.8 (0.110)
(2.4 (0.094))
GPLY6880
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Kathodenkennung:
abgeschrägte Ecke
Cathode mark:
bevelled edge
Gewicht / Approx. weight: 40 mg
2002-04-03
9
LS A676, LA A676, LO A676, LY A676
Lötbedingungen
Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lötprofil
(nach IPC 9501)
IR Reflow Soldering Profile (acc. to IPC 9501)
OHLY0597
300
˚C
T
250
240-245 ˚C
10-40 s
200
183 ˚C
120 to 180 s
Ramp-down rate up to 6 K/s
150
Defined for Preconditioning: up to 6 K/s
100
Ramp-up rate up to 6 K/s
50
Defined for Preconditioning: 2-3 K/s
0
0
50
100
150
200
t
2002-04-03
10
s
250
LS A676, LA A676, LO A676, LY A676
Wellenlöten (TTW)
TTW Soldering
(nach CECC 00802)
(acc. to CECC 00802)
OHLY0598
300
C
T
10 s
250
Normalkurve
standard curve
235 C ... 260 C
Grenzkurven
limit curves
2. Welle
2. wave
200
1. Welle
1. wave
150
ca 200 K/s
2 K/s
5 K/s
100 C ... 130 C
100
2 K/s
50
Zwangskühlung
forced cooling
0
0
50
100
150
200
t
2002-04-03
11
s
250
LS A676, LA A676, LO A676, LY A676
Empfohlenes Lötpaddesign
Recommended Solder Pad
IR Reflow Löten / Wellenlöten / TTW
IR Reflow Soldering / TTW Soldering
4.5 (0.177)
4.2 (0.165)
1.7 (0.067)
Padgeometrie für
verbesserte Wärmeableitung
Paddesign for
improved heat dissipation
Pick up Area
Cu Fläche > 16 mm 2 per pad
Cu-area
Lötstopplack
Solder resist
OHPY1302
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)
Gurtung / Polarität und Lage
Verpackungseinheit 2000/Rolle, ø330 mm
Method of Taping / Polarity and Orientation Packing unit 2000/reel, ø330 mm
4 (0.157)
4.25 (0.167)
8 (0.315)
12 (0.472)
1.75 (0.069)
5.5 (0.217)
2 (0.079)
3.95 (0.156)
1.5 (0.059)
C
Cathode identification
OHAY2273
Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)
2002-04-03
A
12
LS A676, LA A676, LO A676, LY A676
Revision History: 2002-04-03
Previous Version:
2001-02-13
Page
Subjects (major changes since last revision)
12
Recommended Solder Pad
4
value (wavelength amber/yellow
5
wavelength groups
2
wavelength grouping for yellow and orange
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.
1
A critical component is a component used in a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2002-04-03
13