Microsemi MSiCSS10120CC Silicon carbide dual schottky power rectifier Datasheet

PRELIMINARY
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803
Website: http://www.microsemi.com
Gort Road Business Park, Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
SILICON CARBIDE
DUAL SCHOTTKY POWER RECTIFIER
DEVICES
MSiCSN10120CC MSiCSN10120CA MSiCSN10120D
MSiCSS10120CC
MSiCSS10120CA
MSiCSS10120D
10A / 1200V
Silicon Carbide
Dual Schottky Rectifier
ABSOLUTE MAXIMUM RATINGS (TC = +25°C unless otherwise noted)
Parameters / Test Conditions
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
VRWM
1200
V
Surge Peak Reverse Voltage
VRSM
1200
V
DC Blocking Voltage
VDC
1200
V
Average Forward Current, 25°C
Io
10
Apk
Peak Surge Forward Current @ tp = 8.3ms, half
sinewave, Io = 0; VRM = 0
IFSM
50
Apk
Thermal Resistance, Junction to Case
Rθjc
°C/W
Thermal Resistance, Junction to Ambient
Rθja
°C/W
Operating Junction Temperature
Tj
-65°C to +225
°C
Storage Temperature
Tstg
-65°C to +225
°C
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) (Per Diode)
Parameters / Test Conditions
Symbol
Forward Voltage*
IF = 1A, Tj = 25°C
IF = 2.5A, Tj = 25°C
IF = 5.0A, Tj = 25°C
IF = 10.0A, Tj = 25°C
VF
Reverse Current
VR = 1200V, Tj = 25°C
VR = 1200V, Tj = 175°C
IR
Junction Capacitance
VR = 0V
f = 1MHz
Min.
Max.
1.0
1.2
1.4
1.8
100
200
TO-257
MSiCSN10120
U-3
(SURFACE MOUNT: SMD.5)
MSiCSS10120 ____
Unit
V
•1
1200
•3
CC – COMMON CATHODE
µA
•1
Cj
•2
pF
•2
•3
CA – COMMON ANODE
* Pulse test: Pulse width 300 µsec, Duty cycle 2%
Note:
1. Derate linearly @ tbd
•1
•2
•3
D - DOUBLER
T4-LDS-0107 Rev. 1 (091991)
Page 1 of 3
PRELIMINARY
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803
Website: http://www.microsemi.com
Gort Road Business Park, Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
PACKAGE DIMENSIONS
Ltr
BL
CH
LD
LL
LO
LS
MHD
MHO
TL
TT
TW
TERM 1
TERM 2
TERM 3
Dimensions
Millimeters
Inches
Min
Max
Min
Max
10.41
10.92
.410
.430
4.83
5.08
.190
.200
0.64
0.89
.025
.035
12.82
15.11
.505
.595
3.05 BSC
.120 BSC
2.54 BSC
.100 BSC
3.56
3.81
.140
.150
13.39
13.64
.527
.537
16.38
16.89
.6450
.665
0.89
1.14
.035
.045
10.41
10.67
.410
.420
SEE SCHEMATIC
SEE SCHEMATIC
SEE SCHEMATIC
SCHEMATIC
NOTE:
1. Dimensions are in millimeters.
2. Inch equivalents are given for general information only.
3. Glass meniscus included in dimension TL and BL
FIGURE 1 – Dimensions and configuration (TO-257AA)
T4-LDS-0107 Rev. 1 (091991)
Page 2 of 3
PRELIMINARY
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841
1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803
Website: http://www.microsemi.com
Gort Road Business Park, Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Dimensions
NOTE:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. In accordance with ASME Y14.5M, diameters are
equivalent to φx symbology.
Symbol
Inches
BL
BW
CH
LH
LW1
LW2
LL1
LL2
LS1
LS2
Q1
Q2
Min
Max
.395
.405
.291
.301
.1085
.1205
.010
.020
.281
.291
.090
.100
.220
.230
.115
.125
.150 BSC
.075 BSC
.030
.030
Millimeters
Min
Max
10.04
10.28
7.40
7.64
2.76
3.06
0.25
0.51
7.14
7.41
2.29
2.54
5.59
5.84
2.93
3.17
3.81 BSC
1.91 BSC
0.762
0.762
SCHEMATIC
2
2
1
1
3
3
FIGURE 2 – Physical dimensions, surface mount U3 (SMD.5)
T4-LDS-0107 Rev. 1 (091991)
Page 3 of 3
Similar pages