8 D 7 5 6 4 NOTES: MOUNTING: Mounts in a .250 .002 [ 6.35mm .05] panel hole on .375 [9.5mm] centers. 1. Panel thickness .031 [.8 mm] to .250 [6.35mm]. Panel hole should be deburred, but not chamfered. 2. ASSEMBLY: Insert lens through panel hole, (for thin panels less than .188 [4.75mm] thick, slide SPC 125 spacer on back of lens), and insert LED into lens. 3. MATERIAL: Polycarbonate, UL 94-V2 4. U.S. & Foreign Pat. Issued & Pend. 2 3 ECN# REV. 1 001 1 REVISIONS DESCRIPTION CHANGE LENS DESIGN FROM FRESNEL TO PLAIN, ADD UL RATING TO MATERIAL. REVISED PER ECR111009AZ01 DATE INITIALS 1-7-10 KH 4-23-10 SMU D SPACER (ORDER SEPARATELY) C C .430 10.92mm SPC 125 .280 7.11mm .250 6.35mm B B .270 6.86mm .070 1.79mm ORDERING CODE : CLR 301 XXX MODEL RTP ATP GTP BTP YTP CTP A 8 LENS COLOR RED TRANSPARENT AMBER TRANSPARENT GREEN TRANSPARENT BLUE TRANSPARENT YELLOW TRANSPARENT CLEAR TRANSPARENT 7 DISPLAY PANEL UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: ANGLES 1' FINISH MATERIAL BREAK ALL CORNERS AND SHARP EDGES .030 MAX TITLE: SEE NOTES SPC 125 SPACER PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 5 4 3 DRAWN: CHECKED: 5MM ROUND LOW PROFILE PLAIN LENS DATE APPROVAL THIRD ANGLE PROJECTION ASSEMBLY 6 190 Bosstick Boulevard, Suite101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] FINISH LED LENS VISUAL COMMUNICATIONS COMPANY, INC. POLYCARBONATE, UL 94-V2 DECIMALS .X .020 .010 .XX .XXX .005 SMU 4-23-10 DZ 4-23-10 SIZE SCALE: 1:1 DO NOT SCALE DRAWING 2 REV DWG. NO. B CLR 301 XXX 001 SHEET 1 OF 1 1 A