Resistors Resistors Wire Bondable Resistor Network Arrays Wire Bondable Resistor Network Arrays Chip Network Array Series Wire Bondable Tight TCR trackingNetwork to ±5ppm/°C Resistor Arrays Absolute tolerances to ±0.1% Absolute tolerances to ±0.1% Chip Network Array Series Ratio match tolerances to ±0.05% Tight TCR tracking to ±5ppm/°C Ultra-stable tantalum nitride resistors match tolerances to ±0.05% Chip Network Array Series Ultra-stable tantalum nitride • Absolute tolerances to ±0.1% resistors • Tight TCR tracking to ±5ppm/°C All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) • Ratio match tolerances to ±0.05% • Ultra-stable tantalum nitride resistors All parts are Pb-free and comply with EU 2011/65/EU (RoHS2) IRC’s TaNSil® network array resistors are ideally suited for applications that demand a small footprint. The small wire bondable chip ® ® package provides higher component density, lower resistor costfor andapplications high demand reliability. IRC’sTaNSil TaNSil network array resistors are ideally IRC’s network array resistors are ideally suited forsuited that a small footprint. The small wire bondable chip that demand a higher small component footprint. The small wire bondable chip package provides density, lower resistor cost and highpackage reliability. provides higher component resistor costtolerance, and highexceptional reliability.TCR tracking and low cost. The tantalum nitride film systemdensity, on siliconlower provides precision on silicon provides precision tolerance, TCR tracking and® resistor low cost.film. The tantalum nitride in system Excellent performance harsh, humid environments is a trademark of IRC’s self-passivating TaNSil The tantalum nitrideinfilm system silicon provides precision tolerance, exceptional tracking and low cost. TaNSil®TCR resistor Excellent performance harsh, humidon environments is a trademark of IRC’s Excellent performance in harsh, humid environments is a trademark of IRC’s self-passivating TaNSil® resistor film. For applications requiring high performance resistor networks in a low cost, wire bondable package, specify IRC For requiring high high performance resistor resistor networksnetworks in a low cost, wire package, specifypackage, IRC For applications requiring performance in a lowbondable cost, wire bondable specify IRC network array die. network die. networkarray array die. Electrical Data TCR/Inspection Code Table Resistance Range Isolated Bussed 10Ω to 2.5MΩ 10Ω to 1.25MΩ Absolute Tolerance to ±0.1% Ratio Tolerance to R1 to ±0.05% to ±0.1% Absolute TCR to ±25ppm/°C Tracking TCR to ±5ppm/°C Element Power Rating 100mW @ 70°C 8-Pad 400mW @ 70°C 16-Pad 800mW @ 70°C 24-Pad 1.0W @ 70°C Package Power Rating Rated Operating Voltage (not to exceed √ P x R) Commercial Code MIL Inspection Code* ±300ppm/°C 00 04 ±100ppm/°C 01 05 ±50ppm/°C 02 06 ±25ppm/°C 03 07 *Notes: Product supplied to Class H of MIL-PRF 38534 include 100% visual inspection Power Derating Data 100V Operating Temperature -55°C to +150°C Noise <-30dB Substrate Material Oxidized Silicon (10KÅ SiO2 minimum) 0.016˝ ±0.001 (0.406mm ±0.01) Substrate Thickness Bond Pad Metallization 50mW @ 70°C Absolute TCR Aluminum 10KÅ minimum Gold 15KÅ minimum 1 Silicon (gold available1) Backside Passivation Silicon Dioxide or Silicon Nitride Note 1: Not recommended for new designs General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. General Note © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. General Note © Electronics TT Electronics plcthe right to make changes in product specification without notice or liability. TT reserves All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc BI Technologies IRC Welwyn WBC Series Issue January 2009 Sheet 1 of 4 http://www.ttelectronics.com/resistors BI Technologies IRC Welwyn 11.17 http://www.ttelectronics.com/resistors © TT Electronics plc 11.17 Wire Bondable Resistor Network Arrays Chip Network Array Series Wire Bondable Resistor Network Arrays Manufacturing Capabilities Data Isolated schematic A Absolute TCR (±ppm/°C) Bussed schematic B Ohmic range (Ω) Available tolerances Available ratio tolerances Best TCR tracking (±ppm/°C) Ohmic range (Ω) Available tolerances Available ratio tolerances Best TCR tracking (±ppm/°C) 10 - 25 FGJ FG 50 10 - 25 FGJ FG 200 26 - 50 DFGJ CDF 10 26 - 50 FGJ DFG 100 51 - 200 CDFGJ CDFG 5 51 - 100 DFGJ CDFG 50 201 - 2.5M BCDFGJ ABCDFG 5 101 - 200 DFGJ BCDFG 25 201 - 500 BCDFGJ BCDFG 20 300 501 - 1.25M B C D F G J A B C D F G 100 5 26 - 50 DFGJ CDFG 10 26 - 50 FGJ DFG 100 51 - 200 CDFGJ CDFG 5 51 - 100 DFGJ CDFG 50 201 - 2.5M BCDFGJ ABFG 5 101 - 200 DFGJ BCDFG 25 201 - 500 BCDFGJ BCDFG 20 501 - 350K BCDFGJ ABCDFG 5 26 - 50 DFGJ CDFG 10 51 - 100 DFGJ CDFG 50 51 - 200 CDFGJ CDFG 5 101 - 200 DFGJ BCDFG 25 201 - 2.5M BCDFGJ ABFG 5 201 - 500 BCDFGJ BCDFG 20 50 501 - 1.25M B C D F G J A B C D F G 51 - 200 CDFGJ CDFG 5 201 - 2.5M BCDFGJ ABFG 5 201 - 500 BCDFGJ BCDFG 5 20 25 © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 501 - 1.25M B C D F G J A B C D F G 5 WBC Series Issue January 2009 Sheet 2 of 4 BI Technologies IRC Welwyn http://www.ttelectronics.com/resistors © TT Electronics plc 11.17 Wire Bondable Resistor Network Arrays Chip Network Array Series Wire Bondable Resistor Network Arrays Physical Data DSS4A DSS4X 8 7 6 5 1 2 3 4 0.070˝ ±0.001 (1.778mm ±0.025) 0.070˝ ±0.001 (1.778mm ±0.025) R1 DSS4B 8 Pad 1 7 6 5 2 3 4 R1 0.004˝ min Bond Pads 1 DSS8X DSS8A 0.080˝ ±0.001 (2.032mm ±0.025) 0.140˝ ±0.001 (3.556mm ±0.025) 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 R1 DSS8B Pad 1 0.004˝ min Bond Pads R1 © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. WBC Series Issue January 2009 Sheet 3 of 4 BI Technologies IRC Welwyn http://www.ttelectronics.com/resistors © TT Electronics plc 11.17 Wire Bondable Resistor Network Arrays Chip Network Array Series Wire Bondable Resistor Network Arrays Physical Data DQSCX DQSCA 0.115˝ ±0.001 (2.921mm ±0.025) 24 23 22 21 20 19 18 17 16 15 14 13 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 1 2 3 4 5 6 7 8 9 10 11 12 0.086˝ ±0.001 (2.184mm ±0.025) R1 DQSCB Pad 1 R1 0.004˝ min Bond Pads Environmental Data Ordering Data Prefix Test Thermal Shock Method Max ∆R Typical ∆R MIL-STD-202 Method 107 Test condition F ±0.1% ±0.02% DSS8 - B - 01 - 1002 - F - B Style DSS4 = 8-pad Network DSS8 = 6-pad Network DQSC = 24-pad Network Schematic and Termination A = Isolated; B = Bussed TCR/Inspection Code High Temperature Exposure MIL-STD-883 Method 1008 150°C, 1000 hours ±0.1% Low Temperature Storage -55°C, 1000 hours ±0.03% Life MIL-STD-202 Method 108 70°C, 1000 hours ±0.5% MIL-STD-202 Method 108 125°C, 1000 hours ±0.5% Life at Elevated Temperature WBD Reference TCR/Inspection Code Table ±0.05% Resistance Code 4-Digit Resistance Code Ex: 1002 = 10KΩ, 50R1 = 50.1Ω ±0.01% Absolute Tolerance Code J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1% Ratio Tolerance Code (optional) ±0.01% G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1%; A = 0.05% Packaging ±0.05% © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Standard packaging is 2˝ x 2˝ chip tray. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. WBC Series Issue January 2009 Sheet 4 of 4 BI Technologies IRC Welwyn http://www.ttelectronics.com/resistors © TT Electronics plc 11.17