AD6C111-E 1 Form A Solid State Relay DESCRIPTION The AD6C111-E is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. It is designed to replace electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. The output MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly inductive loads. FEATURES APPLICATIONS • High input-to-output isolation • Telecom switching • Low input control power consumption • Tip/Ring control • 110mA maximum continuous load current • PCMCIA modules • 40 ohms maximum on-resistance • Multiplexers • Long life/high reliability • Meter reading systems • Data acquisition • Medical equipment • Battery monitoring • Home/Safety security systems OPTIONS/SUFFIXES • -H High Output Isolation • -S Surface Mount Option • -TR Tape and Reel SCHEMATIC DIAGRAM MAXIMUM RATINGS PARAMETER UNIT MIN Storage Temperature °C -55 125 Operating Temperature °C -40 85 Continuous Input Current mA 40 Transient Input Current mA 400 Reverse Input Control Voltage V Output Power Dissipation TYP MAX 6 mW 500 APPROVALS • rev 1.0 • BABT CERTIFICATE #607836: BS EN 60950, BS EN 41003, BS EN 60065 CSA CERTIFICATE #LR111581-1 • UL FILE #E90096 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com AD6C111-E 1 Form A Solid State Relay ELECTRICAL CHARACTERISTICS - 25° PARAMETER UNIT MIN TYP MAX 1.2 1.5 TEST CONDITIONS INPUT SPECIFICATIONS LED Forward Voltage V LED Reverse Voltage Turn-On Current Turn-Off Current mA If = 10mA V 6 12 Ir = 10uA mA 5 2.5 Io = 110mA 0.5 OUTPUT SPECIFICATIONS Blocking Voltage V Continuous Load Current mA On-Resistance 350 Io = 10uA 110 If = 5mA Ω 35 40 Io = 110mA Leakage Current µA 0.2 10 Vo = 350V Output Capacitance pF 25 50 Vo = 25V, f = 1.0MHz Offset Voltage mV 0.2 If = 5mA COUPLED SPECIFICATIONS Isolation Voltage -H Suffix Turn-On Time 2500 V 3750 T = 1 minute T = 1 minute ms 1 Turn-Off Time ms 0.5 Isolation Resistance GΩ Coupled Capacitance pF Contact Transient Ratio rev 1.0 V V/ 3 If = 5mA, Io = 110mA 3 If = 5mA, Io = 110mA 100 3 µs 2000 7000 dV = 50V Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com AD6C111-E 1 Form A Solid State Relay PERFORMANCE DATA AD6C111-E AD6C111-E Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 40 Device Count 30 20 10 0 30 20 10 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.04 0.08 Turn-On Tim e (m s) 0.28 AD6C111-E Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C Device Count 30 20 10 0 22 23 24 25 26 27 28 60 50 40 30 20 10 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 Leakage Current (uA) AD6C111-E AD6C111-E 0 340 360 380 400 420 440 460 480 Blocking Voltage (V) 50 0 0 10 100 -2 0 20 150 -4 0 30 Load Current (mA) 40 Typical Load Current vs. Temperature 80 40 60 Device Count 0.24 AD6C111-E Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C Device Count 0.2 Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C On-Resistance (ohm s) rev 1.0 0.16 Turn-Off Tim e (m s) 50 21 0.12 40 0.1 20 Device Count 40 Tem perature (C) Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com AD6C111-E 1 Form A Solid State Relay MECHANICAL DIMENSIONS 6 PIN DUAL IN-LINE PACKAGE rev 1.0 6 PIN SURFACE MOUNT DEVICE END VIEW END VIEW TOP VIEW TOP VIEW BOTTOM VIEW/ BOARD PATTERN BOTTOM VIEW/ BOARD PATTERN Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com