CPC1965G AC Solid State Relay Parameter AC Operating Voltage Load Current On State Voltage Drop Rating 260 1 1.6 Units Vrms Arms Vrms (at IL = 1Arms) Features • Load Current up to 1Arms • 600VP Blocking Voltage • 5mA Sensitivity • Zero-Crossing Detection • DC Control, AC Output • Optically Isolated • TTL and CMOS Compatible • Low EMI and RFI Generation • High Noise Immunity • Machine Insertable, Wave Solderable • Flammability classification rating of V-0 Applications • Programmable Control • Process Control • Power Control Panels • Remote Switching • Gas Pump Electronics • Contactors • Large Relays • Solenoids • Motors • Heaters Description The CPC1965G is an AC Solid State Switch using patented waveguide coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The switches are robust enough to provide a blocking voltage of up to 600VP . In addition, tightly controlled zero-cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result, the CPC1965G is well suited for industrial environments where electromagnetic interference could disrupt the operation of electromechanical relays. Approvals • UL Recognized Component: File # E69938 • CSA Certified Component: Certificate # 1172007 Ordering Information Part # CPC1965G Description 4-Lead, 16-Pin DIP (25/Tube) Pin Configuration 1 16 – LED + LED ZC 10 AC Load 8 AC Load Pb RoHS 2002/95/EC DS-CPC1965G-R04 e3 www.clare.com 1 CPC1965G Absolute Maximum Ratings (@ 25˚ C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 PD , Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature Ratings Units 600 VP 5 V 100 mA 1 A 150 mW 1600 mW 3750 Vrms -40 to +85 °C -40 to +125 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. 1 Derate Linearly 1.33 mW/ºC 2 Derate Linearly 16.6 mW/ºC Electrical Characteristcs Parameters Output Characteristics @ 25°C Operating Voltage Range Load Current, Continuous Non-Repetitive Single Cycle Surge Current Off State Leakage Current On-State Voltage Drop Critical Rate of Rise 3 Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage Operating Frequency 1 Load Power Factor for Guaranteed Turn-On 2 Input Characteristics @ 25°C Input Control Current 4 Input Voltage Drop Input Drop-out Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Conditions Symbol Min Typ Max Units VL VL=120-260Vrms VL=600VP IL=1Arms - IL dV/dt 20 0.005 1000 - 260 1.0 10 1 1.6 - Vrms Arms A mA Vrms V/µs 1st half cycle Subsequent half cycle - tON tOFF PF 20 0.25 2 1 - 0.5 0.5 10 400 - IF=5mA VR=5V IF VF IR 0.9 0.8 - 0.8 1.2 - 5 1.4 10 mA V V µA - CI/O - 3 - pF IF=5 mA ITSM ILEAK cycles V V Hz - 1 Zero Cross 1st half cycle @ <100Hz 2 Snubber circuits may be required at low power factors. 3 Tested in accordance with EIA/NARM standard RS-443. 4 For high noise environments, use I =10mA. F 2 www.clare.com R04 CPC1965G PERFORMANCE DATA* Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) 25 Device Count (N) 25 20 15 10 5 1.26 1.27 1.28 1.29 LED Forward Voltage (V) 10 5 1.30 Typical IF for Switch Operation (TA=25ºC, IL=1Arms) 0.90 15 10 5 0.77 0.78 0.79 0.80 0.81 LED Current (mA) 0.82 0.83 Typical Blocking Voltage vs. Temperature On-State Voltage (Vrms) 950 900 850 800 750 -40 -20 0 20 40 60 Temperature (ºC) 80 100 10 5 795 Typical IF for Switch Operation vs. Temperature (IL=500mArms) 800 805 810 815 820 Blocking Voltage (VP) 825 Typical Leakage vs. Temperature (VL=600VP) 280 260 0.75 240 220 200 180 -20 0 20 40 60 Temperature (ºC) 80 -40 100 Typical On-State Voltage vs. Temperature (IL=500mArms) 1.00 0.95 0.90 0 20 40 60 Temperature (ºC) 80 0 20 40 60 Temperature (ºC) 80 100 1.6 1.05 -20 -20 Typical LED Forward Voltage vs. Temperature 1.10 0.85 -40 15 1.16 0.80 1.15 1000 1.04 1.07 1.10 1.13 On-State Voltage (Vrms) 0.85 0.70 -40 0 Typical Blocking Voltage Distribution (TA=25ºC) 0 1.01 LED Forward Current (mA) Device Count (N) 15 Leakage (μA) 1.25 20 Blocking Voltage (VP) 20 0 0 100 1.5 IF=50mA IF=20mA 1.4 1.3 1.2 1.1 -40 IF=10mA IF=5mA -20 0 20 40 60 Temperature (ºC) 80 100 Maximum Surge Current (non-repetitive) (TJ=50ºC max) Typical Maximum Load Current vs. Temperature 1200 12 1100 Peak Surge Current (A) Load Current (mArms) 20 LED Forward Voltage (V) Device Count (N) 30 Device Count (N) 35 Typical On-State Voltage (TA=25ºC, IL=1Arms) 1000 900 800 700 600 500 10 8 6 4 2 0 400 -40 -20 0 20 40 60 Temperature (ºC) 80 100 16 50 Pulse Duration (mS) 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R04 www.clare.com 3 CPC1965G Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 4-Lead, 16-Pin, DIP Package Recommended PCB Hole Pattern 7.620 ± 0.254 (0.300 ± 0.010) 19.202 ± 0.381 (0.756 ± 0.015) Pin 16 Pin 16 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 17.780 TYP (0.700 TYP) 15.240 TYP (0.600 TYP) 3.302 ± 0.051 (0.130 ± 0.002) 0.800 DIA x 4 (0.031 DIA x 4) 0.010 TYP 7.620 (0.300) 9.144 ± 0.508 (0.360 ± 0.020) Pin 1 7.239 TYP (0.285 TYP) 2.540 ± 0.127 (0.100 ± 0.005) 15.240 (0.600) 17.780 (0.700) 4.064 TYP (0.160 TYP) 0.559 ± 0.102 (0.022 ± 0.004) 0.457 ± 0.076 (0.018 ± 0.003) Dimensions mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 4 Specification: DS-CPC1965G-R04 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/16/08