EPCOS B7742 Saw gps extractor filter gps extractor Datasheet

SAW Components
SAW GPS Extractor Filter
GPS Extractor
Series/type:
Ordering code:
B7742
B39162B7742E310
Date:
Version:
April 24, 2009
2.3
 EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW GPS Extractor Filter
B7742
1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 MHz
Data Sheet
Application
■ Low loss RF GPS Extractor filter for mobile phones
■
■
■
■
■
■
■
using common antenna for GPS and Cellular/PCS/K-PCS/WCDMA/Bluetooth band
Placed between antenna, GPS and Cellular/PCS/KPCS/WCDMA/Bluetooth band
No switches and control lines required
Integrated low loss GPS filter with single ended output 50 Ω
Very low insertion attenuation in GPS and NONGPS band
High selectivity of GPS filter
Low amplitude ripple in all bands
Usable passbands 2 MHz (GPS), 70 MHz (Cellular),
120 MHz (K-PCS), 140 MHz (PCS), 60 MHz
(WCDMA Band I), 83.5 MHz (Bluetooth)
Features
■
■
■
■
■
■
■
Package size 2.5 x 2.0 x 0.68 mm3
Package code DCS6N
RoHS compatible
Approximate weight 0.015 g
Package for Surface Mount Technology (SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Pin configuration
■ 1
■ 3
■ 6
■ 4
■ 2,5
Input antenna
Output GPS band
Output NON-GPS band (Cellular/KPCS/PCS/WCDMA/Bluetooth band depending on external matching)
To be grounded
Ground
1
6
3
4
2,5
Please read cautions and warnings and
important notes at the end of this document.
2
April 24, 2009
SAW Components
B7742
1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 MHz
SAW GPS Extractor Filter
Data Sheet
Characteristics
Matching Circuit 11) : All Bands + GPS (1575.42 MHz)
Temperature range for specification:
Terminating input antenna impedance:
Terminating GPS impedance:
Terminating NON-GPS impedance:
T
ZANT
ZGPS
ZnGPS
=
=
=
=
ANT
-30 ˚C to +85 ˚C
50 Ω || 6.8 nH
50 Ω
50 Ω || 6.8 nH
NON-GPS
(All bands)
Cellular
GPS
min.
B7742
typ.
@ 25 ˚C
max.
—
—
—
—
—
1.1
0.8
0.8
1.1
1.1
1.6
1.3
1.3
1.5
1.6
dB
dB
dB
dB
dB
... 960.0 MHz
... 1990.0 MHz
... 2170.0 MHz
... 2483.5 MHz
33
33
33
35
39
37
37
39
—
—
—
—
dB
dB
dB
dB
... 1576.42
... 960.0
... 1990.0
... 2170.0
... 2483.5
MHz
MHz
MHz
MHz
MHz
—
—
—
—
—
1.3
2.0
1.4
1.6
1.8
1.8
2.5
2.0
2.1
2.4
... 1576.42 MHz
—
1.2
1.8
... 960.0 MHz
... 1990.0 MHz
... 2170.0 MHz
... 2483.5 MHz
—
—
—
—
2.0
1.4
1.6
1.8
2.5
2.0
2.1
2.4
33
33
33
35
37
37
37
40
—
—
—
—
Maximum insertion attenuation
Antenna-GPS
1574.42 ... 1576.42
Antenna-NON-GPS
824.0 ... 960.0
Antenna-NON-GPS 1710.0 ... 1990.0
Antenna-NON-GPS 2110.0 ... 2170.0
Antenna-NON-GPS 2400.0 ... 2483.5
Attenuation
Antenna-GPS
Antenna-GPS
Antenna-GPS
Antenna-GPS
αmax
MHz
MHz
MHz
MHz
MHz
α
824.0
1710.0
2110.0
2400.0
VSWR (Antenna port)
GPS band
1574.42
NON-GPS band
824.0
NON-GPS band
1710.0
NON-GPS band
2110.0
NON-GPS band
2400.0
VSWR (GPS port)
GPS band
1574.42
VSWR (NON-GPS port)
824.0
1710.0
2110.0
2400.0
Isolation between NON-GPS and GPS path
824.0 ... 960.0 MHz
1710.0 ... 1990.0 MHz
2110.0 ... 2170.0 MHz
2400.0 ... 2483.5 MHz
α
1) Further Matching Circuits are specified in B7742 Appendix
Please read cautions and warnings and
important notes at the end of this document.
3
April 24, 2009
dB
dB
dB
dB
SAW Components
SAW GPS Extractor Filter
B7742
1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 MHz
Data Sheet
Antenna - GPS (transfer function for matching circuit 1):
Antenna - GPS (transfer function passband for matching circuit 1):
Please read cautions and warnings and
important notes at the end of this document.
4
April 24, 2009
SAW Components
SAW GPS Extractor Filter
B7742
1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 MHz
Data Sheet
Antenna - NON-GPS (transfer function for matching circuit 1, all bands):
Antenna - NON-GPS (isolation, transfer function for matching circuit 1, all bands):
Please read cautions and warnings and
important notes at the end of this document.
5
April 24, 2009
SAW Components
SAW GPS Extractor Filter
B7742
1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 MHz
Data Sheet
Smith charts / VSWR (for matching circuit 1, all bands)
S11 Antenna
S22 GPS
S33 NON-GPS
Please read cautions and warnings and
important notes at the end of this document.
6
April 24, 2009
SAW Components
B7742
1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 MHz
SAW GPS Extractor Filter
Data Sheet
Maximum ratings
Operable temperature range
Storage temperature range
DC voltage
ESD voltage
Input power at
824 ... 960 MHz
1710 ... 1990 MHz
1850 ... 1990 MHz
2400 ... 2483.5 MHz
1)
T
Tstg
VDC
VESD
PIN
PIN
PIN
PIN
–30/+85
–40/+85
5
501)
31
31
31
31
˚C
˚C
V
V
dBm
dBm
dBm
dBm
machine model, 10 pulses
effective power in the on-state
continuous wave signal
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
7
April 24, 2009
SAW Components
B7742
1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 MHz
SAW GPS Extractor Filter
Data Sheet
References
Type
B7742
Ordering code
B39162B7742E310
Marking and package
C61157-A7-A116
Packaging
F61074-V8153-Z000
Date codes
L_1126
S-parameters (unmatched)
B7742_NB.s3p
B7742_WB.s3p
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2009. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
8
April 24, 2009
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from
the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
9
April 24, 2009
Similar pages