GBU604-K - GBU607-K Taiwan Semiconductor CREAT BY ART 6A, 400V - 1000V Glass Passivated Single-Phase Bridge Rectifiers FEATURES - Ideal for printed circuit board - High case dielectric strength of 1500 VRMS - High surge current capability - Typical IR less than 0.1μA - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 GBU MECHANICAL DATA Case: GBU Molding compound: UL flammability classification rating 94V-0 Terminal: Matte tin plated leads, solderable per J-STD-002 Polarity: As marked Mounting torque: 0.56 Nm (5 in-lbs.) max. Weight: 4 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL Marking code GBU604 GBU605 GBU606 GBU607 -K -K -K -K GBU604 GBU605 GBU606 GBU607 UNIT Maximum repetitive peak reverse voltage VRRM 400 600 800 1000 V Maximum RMS voltage VRMS 280 420 560 700 V Maximum DC blocking voltage VDC 400 600 800 1000 V Maximum average forward rectified current IF(AV) 6 A Peak forward surge current, 8.3 ms single half sine-wave IFSM 175 A Rating of fusing ( t<8.3ms) I2t 127 A2s Maximum Instantaneous Forward Voltage (Note 1) IF= 3 A IF= 6 A VF 1.0 1.1 V Maximum reverse current @ rated VR TJ=25°C TJ=125°C Typical junction capacitance per leg (Note 2) Typical thermal resistance Operating junction temperature range Storage temperature range 5 IR CJ μA 500 211 94 pF RθJC RθJA 2 21 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Measured at 1MHz and applied reverse bias of 4.0V Version: B1603 GBU604-K - GBU607-K Taiwan Semiconductor ORDERING INFORMATION PART NO. PACKING CODE PACKAGE PACKING D2 GBU 20 / Tube GBU60x-K (Note 1) Note 1: "x" defines voltage from 50V (GBU601) to 1000V (GBU607) EXAMPLE EXAMPLE P/N PART NO. PACKING CODE GBU606-K D2 GBU606-K D2 RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG.1 FORWARD CURRENT DERATING CURVE FIG. 2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD CURRENT (A) 10 8 6 4 Resister or inductive load with heatsink 2 0 0 25 50 75 100 125 150 125 100 75 50 8.3ms single half sine wave 25 0 1 150 10 CASE TEMPERATURE (°C) NUMBER OF CYCLES AT 60 Hz FIG. 4 TYPICAL FORWARD CHARACTERISTICS FIG. 3 TYPICAL REVERSE CHARACTERISTICS 1000 100 100 10 TJ=125°C 1 TJ=25°C 0.1 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 140 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (μA) 100 10 1 0.1 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 FORWARD VOLTAGE (V) Version: B1603 GBU604-K - GBU607-K Taiwan Semiconductor FIG. 5 TYPICAL JUNCTION CAPACITANCE CAPACITANCE (pF) A 1000 GBU604 100 GBU605GBU607 f=1.0MHz Vsig=50mVp-p 10 0.1 1 10 100 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS GBU DIM. Unit (mm) Unit (inch) Min Max Min Max A 21.80 22.30 0.858 0.878 B 3.50 4.10 0.138 0.161 C 7.40 7.90 0.291 0.311 D 1.65 2.16 0.065 0.085 E 2.06 2.54 0.081 0.100 F 1.02 1.27 0.040 0.050 G 4.83 5.33 0.190 0.210 H 1.91 2.54 0.075 0.100 I 18.30 18.80 0.720 0.740 J 17.50 18.00 0.689 0.709 K 3.30 3.56 0.130 0.140 L 2.40 2.66 0.094 0.105 M 0.46 0.56 0.018 0.022 MARKING DIAGRAM P/N = Marking code YW = Date Code F = Factory Code Version: B1603 GBU604-K - GBU607-K Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Version: B1603