SwitchesSection - 2010:SwitchesSection_v2 - 2005 8/6/10 17:15 Page 180 SWITCHES Stainless Steel Illuminated Vandal Resistant FRONT PANEL MOUNTING ᔢ ᔢ ᔢ ᔢ ᔢ MPI002- front panel seal to IP66 ᔢ ᔢ ᔢ ᔢ ᔢ Ring illumination 22mm diameter Single pole push to make 50mA, 24Vdc contact rating Red, Green, Amber, Blue, White or dual colour illumination Bright daylight LEDs Independent LED terminals Front panel seal to IP66 Integral supply resistors TVS protection LED terminals marked + and – Switch terminals unmarked Dual Colour LED Configuration /D1 /D4 /D5 Specification MPI002/Termination/Colour/Voltage Illumination style: Terminations: Ring /28 (2.8mm tabs), /TERM or /TE (screw terminals) Single pole, push to make, tactile (momentary action) 50mA, 24Vdc SWITCHES Switching: Max. Switch Rating: LEDs (ratings @ 20mA) Part No. Colours Luminous Intensity Forward Voltage Forward Current Moulding Colour Illumination Voltage: + + + Red – Green Red – Blue Green – Blue /RD /GN /AM /BL /WH /D1 /D4 /D5 Red Green Amber Blue White Red/Green Red/Blue Green/Blue 900mcd 2500mcd 900mcd 1500mcd 900mcd 2500mcd/5000mcd 2000mcd/850mcd 4000mcd/2000mcd 1.85V 3.5V 2.3V 3.5V 3.6V 2.05V/3.6V 2.0V/3.6V 3.6V/3.6V 20mA 20mA 20mA 20mA 20mA 20mA 20mA 20mA Red Green Amber Blue White Black Black Black /no suffix No resistor fitted. An appropriate resistor must be series connected by the user. Voltages as above. /6 6Vdc /12 12Vdc /24 24Vdc Contact Resistance: <100mΩ Insulation Resistance: >103 MΩ Dielectric Strength: Contact to Panel >2.0kV Contact to Contact 1500V Operating Temp. Range: –30˚C to +70˚C Sealing (Front of panel only): Protection Classification: IP66 EN60529 1992 Operations Mechanical: 750,000 (min) Electrical: 35,000 (min) Operating Pressure: 12N Rear Nut Fixing Torque: 0.57Nm Materials Switch assembly: UL94V-0 rated Polyamide (Nylon) Tags: Copper Alloy Terminals: Copper Alloy Switch Body & Button: Stainless Steel Lens and Lens Body: Polycarbonate O ring: Nitrile Internal seal: Silicone Contact Plate: Gold Plated Thread size: 18.97mm x 26TPI ESD Handling precautions must be taken Compliant 180 www.elektron-bulgin.com