FEC40W SERIES 40 WATTS DC-DC CONVERTER FEATURES • 40 WATTS MAXIMUM OUTPUT POWER • OUTPUT CURRENT UP TO 10A • STANDARD 2.00 X 2.00 X 0.40 INCH PACKAGE • HIGH EFFICIENCY UP TO 89% • 4:1 ULTRA WIDE INPUT VOLTAGE RANGE • SIX-SIDED CONTINUOUS SHIELD • FIXED SWITCHING FREQUENCY • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH OPTIONS Negative logic Remote On/Off APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment DESCRIPTION The FEC40W series offer 40 watts of output power from a 2.00 x 2.00 x 0.40 inch package. The FEC40W series with 4:1 ultra wide input voltage of 9~36VDC and 18~75VDC and features 2000VDC of isolation, short-circuit and over-voltage protection. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage accuracy ± 1% Minimum load (Note 6) See Table Voltage adjustability (Note 7) Single and Dual output Line regulation LL to HL at Full Load ± 10% Single/Dual ± 0.2% Load regulation Single Min. Load to Full Load (Note 8) Dual Load cross regulation (Note 9) Dual Ripple and noise ± 0.5% ± 1% ± 5% 20MHz bandwidth See table ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change 3.3VDC output 5VDC output Over voltage protection 12VDC output Zener diode clamp 15VDC output ±12VDC output ±15VDC output Over load protection % of FL at nominal input 250µs 3.9VDC 6.2VDC 15VDC 18VDC ±15VDC ±18VDC 150%, max. Efficiency Input to Output Input(Output) to Case Case grounding 500VDC Isolation capacitance Switching frequency Safety approvals -40ºC ~ +50ºC (without derating) +50ºC ~ +105ºC (with derating) +105ºC 9 Storage temperature range Over temperature protection Thermal impedance (Note 11) Thermal shock Dimensions Weight MIL-HDBK-217F +110ºC 9.2ºC/Watt 7.6ºC/Watt MIL-STD-810F Without Heat-sink With Heat-sink MIL-STD-810F 5% to 95% RH EMC CHARACTERISTICS EMI (Note 12) FR4 PCB ESD Potting material -55ºC ~ +125ºC 10 ohms, min. Vibration 2500pF, max. Relative humidity 300kHz±10% Nickel-coated copper Base material Page 1 of 3 See table 1600VDC, min. 1minute 1600VDC, min. 1minute Connect case to –INPUT with decoupling Y Cap IEC60950-1, UL60950-1, & EN60950-1 Case material MTBF (Note 1) ENVIRONMENTAL SPECIFICATIONS Maximum case temperature GENERAL SPECIFICATIONS Isolation resistance 9 ~ 36VDC 18 ~ 75VDC Input filter Pi type 24VDC input 50VDC 100ms, max. Input surge voltage 48VDC input 100VDC 100ms, max. Input reflected ripple current 20mAp-p Nominal Vin and Power up 20ms, max. Start up time constant resistive load Remote ON/OFF 20ms, max. 24VDC input 9VDC Start-up voltage 48VDC input 18VDC 24VDC input 8VDC Shutdown voltage 16VDC 48VDC input Remote ON/OFF (Note 10) Positive logic (standard) DC-DC ON Open or 3V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Negative logic (option) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Open or 3V < Vr < 12V Input current of remote control pin Nominal input -0.5mA ~ +0.5mA 24VDC input 10mA Remote off state input current 48VDC input 5mA Continuous, automatics recovery Operating ambient temperature Short circuit protection Isolation voltage 24VDC nominal input 48VDC nominal input 40 Watts, max. Input voltage range Output power Epoxy (UL94 V-0) Radiated immunity 2.00 X 2.00 X 0.40 Inch Fast transient (Note 13) (50.8 X 50.8 X 10.2 mm) Surge (Note 13) 60g (2.11oz) Conducted immunity 5 6.617 x 10 hrs www.pduke.com EN55022 Class A, Class B EN61000-4-2 Air ± 8kV Contact ± 6kV Perf. Criteria A EN61000-4-3 10 V/m Perf. Criteria A EN61000-4-4 ± 2kV Perf. Criteria B EN61000-4-5 ± 1kV Perf. Criteria A EN61000-4-6 10 Vr.m.s Perf. Criteria A 2014/4/21 FEC40W SERIES 40 WATTS Model Number Input Range Output Voltage Output Current Min. load FEC40-24S3P3W FEC40-24S05W FEC40-24S12W FEC40-24S15W FEC40-24D12W FEC40-24D15W FEC40-48S3P3W FEC40-48S05W FEC40-48S12W FEC40-48S15W FEC40-48D12W FEC40-48D15W 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 9 ~ 36 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 18 ~ 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 12 VDC ± 15 VDC 0mA 0mA 50mA 50mA ±65 mA ±50 mA 0mA 0mA 50mA 50mA ±65 mA ±60 mA DC-DC CONVERTER (2) No load (3) (4) (5) Full load Output Ripple & Noise Input Current Eff (%) Capacitor Load max 10000mA 8000mA 3333mA 2666mA ± 1667mA ± 1333mA 10000mA 8000mA 3333mA 2666mA ± 1667mA ± 1333mA 50mVp-p 50mVp-p 75mVp-p 75mVp-p 120mVp-p 150mVp-p 50mVp-p 50mVp-p 75mVp-p 75mVp-p 120mVp-p 150mVp-p 75mA 95mA 50mA 50mA 60mA 70mA 55mA 60mA 30mA 25mA 30mA 30mA 87 88 87 87 86 86 87 89 87 88 86 86 25750µF 13600µF 2360µF 1510µF ± 1200µF ± 750µF 25750µF 13600µF 2360µF 1510µF ± 1200µF ± 750µF Note 1. 2. 3. 4. 5. 6. MIL-HDBK-217F @Tc=70 ºC, Full load. Typical value at nominal input and full load. (20MHz BW.) Typical value at nominal input and no load. Typical value at nominal input and full load. Test by minimum input and constant resistive load. The output requires minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 7. For the single output: Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +SENSE should be connected to its corresponding +OUTPUT and likewise the -SENSE should be connected to its corresponding –OUTPUT. 8. Load regulation for dual output : Min load to 100% load balanced on all outputs. 9. Cross regulation for dual output : asymmetrical load 25% / 100% FL 10. The CTRL pin voltage is referenced to –INPUT To order negative logic ON/OFF control add the suffix-N (Ex: FEC40-24S05W-N). 11. Heat-sink is optional and P/N：7G-0026C-F. 12. The FEC40W series standard module meets EN55022 Class A and Class B with external components. For more detail information, please contact with P-DUKE. 13. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. FEC40-48S05W Derating Curve FEC40-48S05W Derating Curve With Heat-sink(Note 11) FEC40-48S05W Efficiency VS Input Voltage FEC40-48S05W Efficiency VS Output Load 92 95 90 90 85 EFFICIENCY(%) EFFICIENCY(%) 80 88 86 84 75 70 65 60 55 50 82 45 40 80 18 Page 2 of 3 24 30 36 42 48 54 INPUT VOLTAGE(V) 60 66 72 75 10 www.pduke.com 20 30 40 50 60 % OF FULL LOAD 70 80 90 100 2014/4/21 FEC40W SERIES 40 WATTS DC-DC CONVERTER MECHANICAL DRAWING 1. All dimensions in Inch (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.014(0.35) 3. Pin dimension tolerance ±0.004 (0.1) EXTERNAL OUTPUT TRIMMING PIN CONNECTION PIN SINGLE DUAL 1 +INPUT 2 -INPUT +INPUT -INPUT CTRL +OUTPUT COM COM -OUTPUT TRIM 3 CTRL 4 -SENSE +SENSE +OUTPUT -OUTPUT TRIM 5 6 7 8 Page 3 of 3 Output can be externally trimmed by using the method shown below. ( ) for dual output trim TRIM UP TRIM DOWN 4(7) 8(8) RU 8(8) www.pduke.com RD 5(4) 2014/4/21