Home Phone Networking Analog Magnetics Module ELECTRONICS INC. EPB5100G & EPB5100G-RC • Designed to work with Conexant HPNA 2.0 Applications • Enhanced Common Mode Attenuation to pass FCC Class B • Add “-RC” after part number for RoHS Compliant • Robust construction allows for IR/VP processes • Temperature Range -40°C to +85°C • 1500 Vrms Isolation Electrical Parameters @ 25° C Cut-off Frequency Insertion Loss (dB Max/) Return Loss (dB Min.) Attenuation (dB Min.) CMRR (dB Min.) Lower Band Upper Band 4.75 MHz-9.75 MHz 4.75 MHz-9.75 MHz @ 1.1 MHz @ 2.2 MHz @ 54 MHz 1 MHz-10 MHz 3.5 11.5 -2.2 -8 -60 -35 -50 -50 • Characteristic Filter Impedance : 100 Ω • Package Schematic 1.00 (25.40) PCA EPB5100G(-RC) Date Code Pin 1 I.D. .090 (2.29) .100 (2.54) .150 (3.81) .480 (12.19) Pad Layout .670 (17.02) .700 (17.78) Chip Side .030 (.762) .010/.015 (.254/.381) .260 (6.60) .008/.012 (.203/.305) 0°-8° 1:1 1 HR+ 16 (TIP) Tip & Ring Capacitor BPF 2 HRTap 3 HR Cable Side 15 (RING) .035 (.889) .016/.022 (.406/.559) .100 (2.54) .600 (15.24) Notes : 1. Lead Finish EPB51000G EPB5100G-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 245°C MSL = 4 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) 3.8 grams 3.8 grams 40 pieces/tube 650 pieces/13” reel 40 pieces/tube 650 pieces/13” reel (*EPB5100GTR) (*EPB5100GTR-RC) 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) † Hot tin dipped over Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSB5100G & -RC Rev. A2 9/18/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com