Cree® LED Module LMH6 with Cree TrueWhite® Technology Data Sheet Cree LED Modules provide a simple solution for lighting designers and manufacturers to adopt best-in-class LED lighting from Cree. The LMH series continues Cree’s history of innovation in LEDs for lighting applications and provides a comprehensive solution including patented Cree TrueWhite® Technology to achieve an industry-leading combination of light quality and efficacy. This versatile LED lighting module allows design flexibility with the beautiful color and efficacy of Cree TrueWhite Technology. A comprehensive design guide and solid-model STEP files are available through the Cree Module sales team. This data sheet is intended to introduce you to the features and benefits of the LMH6 module. The design guide and solid model must be referenced for the thermal, mechanical and optical requirements of a successful LMH6 product design. CLM-DS04-LM Data Sheet: H6 Rev 0C FEATURES • Cree TrueWhite Technology • 2000 & 2900 lm @ 3000-K & 4000-K CCT • DALI or 1–10-V dimming to 5% of rated light output • Comprehensive solution with driver electronics, optics and thermals • Snap-lock tabs for easy trim mounting • Designed to last at least 50,000 hours at L70 • Cree IES LM-80 data in support of U.S. DOE ENERGY STAR® qualification • The LMH6 (230-V) complies with multiple international standards • Integral splice compartment • Both Asian and European Union wire access plates supplied The Cree LED Module LMH6 with Cree TrueWhite Technology is the ideal choice for commercial lighting applications where high CRI, luminous flux and efficacy are required, such as restaurants, retail and hospitality lighting. Cree TrueWhite technology: • • • • A better way to generate white light that utilizes a patented mixture of unsaturated yellow and saturated red LEDs. Proprietary optical system utilizes a unique combination of reflective and refractive optical components to achieve a uniform, comfortable appearance. Pixelation and direct view of LEDs is eliminated. Technology benefit – high CRI and efficacy allows customers to avoid making tradeoffs between energy efficiency and light quality as compared to other lighting alternatives. Marketing benefit – Cree logo on lens enables brand marketing value on final design. DALI Features • • • DALI (Digital Addressable Lighting Interface) dimming DALI device type 1 (IEC 62386 Part 102) for the AC/DC power supply (DALI version 2006) Onboard thermal management Subject to change without notice. www.cree.com/modules 1 Characteristics The following table provides several base order codes for the Cree LED Module LMH6, as well as a description of the order-code nomenclature. CCT (K)* Nominal Luminous Flux (lm) CRI Input Power (W) Input Voltage (V)/Freq (Hz)** Power Factor Dimming Order Code 4000 2000 >90 27 230/50 >.90 DALI LMH060-2000-40F9-20200TW 4000 2900 >90 37 230/50 >.90 DALI LMH060-2900-40F9-20200TW 3000 2000 >90 27 230/50 >.90 DALI LMH060-2000-30F9-20200TW 3000 2900 >90 37 230/50 >.90 DALI LMH060-2900-30F9-20200TW 4000 2000 >90 27 230/50 >.90 1–10 V LMH060-2000-40F9-20300TW 4000 2900 >90 37 230/50 >.90 1–10 V LMH060-2900-40F9-20300TW 3000 2000 >90 27 230/50 >.90 1–10 V LMH060-2000-30F9-20300TW 3000 2900 >90 37 230/50 >.90 1–10 V LMH060-2900-30F9-20300TW * Refer to section below on chromaticity for more details ** Input range is 220–240 V / 50–60 Hz Note: Cree maintains a tolerance of +/- 7% on flux and power measurements Form Factor - Light Engine units = mm Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® , Cree TrueWhite® Technology and TrueWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. 2 CLM-DS04-LMH6 Rev 0C Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/modules Form Factor - Power Supply units = mm Thermal Management Guidelines Acceptable ambient starting and operating temperatures of the Cree LED Module LMH6 are between 0°C and 40°C. (The lifetime and performance estimates described in this document require that the Tc limit stated in this Thermal Management Guidelines section is adhered to and only the modifications described in this document are implemented.) Tc LOCATION The Cree LED Module LMH6 is designed to perform in a variety of non-IC environments; however, the LED module lifetime is highly dependent upon the Tc (case temperature). To achieve lifetime and performance estimates and to maintain the warranty, the final design cannot exceed 70°C at thermal equilibrium, based on the Tc point (shown in the figure on the right) where the thermocouple is placed and tested in situ. Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® , Cree TrueWhite® Technology and TrueWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. 3 CLM-DS04-LMH6 Rev 0C Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/modules Photometry The following photometry results are design values. Absolute photometric testing at independent testing labs can be expected to vary by ± 7%. Candela Table Angle LMH060-2900 LMH060-2000 0 1266 987 5 1261 979 15 1220 933 25 1119 847 35 950 704 45 783 520 55 488 333 65 242 127 75 74 55 85 7 3 90 1 1 Zonal Lumens Summary LMH060-2900 Zone Lumens % Lamp % Fixt 0-30 979 - 34 0-40 1572 - 54 0-60 2574 - 88 0-90 2916 - 100 0-180 2916 - 100 Zonal Lumens Summary LMH060-2000 Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® , Cree TrueWhite® Technology and TrueWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. 4 CLM-DS04-LMH6 Rev 0C Zone Lumens % Lamp % Fixt 0-30 745 - 35 0-40 1184 - 57 0-60 1885 - 90 0-90 2074 - 100 0-180 2074 - 100 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/modules Chromaticity Secondary optics added to the module will reduce the light output and could also alter the color characteristics of the final luminaire design. The Cree LED Module LMH6 provides high color consistency around the specified color temperature. Individual LEDs are tested and matched in order to meet the designed chromaticity specification, which is defined by the following bounding coordinates. Color Temp Code 40F 35F 30F 27F CCT (K) 4000 3500 3000 2700 Ccx Ccy 0.3722 0.3739 0.3822 0.3706 0.3915 0.3857 0.3813 0.3892 0.3974 0.3858 0.4074 0.3823 0.4174 0.3979 0.4073 0.4016 0.4236 0.3969 0.4334 0.3932 0.4442 0.4093 0.4342 0.4131 0.4473 0.4037 0.4569 0.4000 0.4684 0.4164 0.4586 0.4203 Order Codes Series LMH = LED Module Type Luminous flux 2000 = 2000 lumens nominal CRI 9 = 90+ CRI Internal code TW = TrueWhite SSSSSS-LLLL-CCCC-NNNNNNN Power supply 2 = 230-V Color temp 30F = 3000-K CCT Form factor Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® , Cree TrueWhite® Technology and TrueWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency. 5 CLM-DS04-LMH6 Rev 0C Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/modules