UNISONIC TECHNOLOGIES CO., LTD ER1004C Preliminary FAST RECOVERY EPITAXIAL DIODE SUPERFAST RECOVERY RECTIFIER DESCRIPTION The UTC ER1004C is a superfast recovery rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop, high current capability and high efficiency, etc. FEATURES * Low forward voltage drop * High current capability * High surge capacity * Low power loss * High efficiency * Super fast recovery times, high voltage SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free ER1004CL-TA3-T ER1004CG-TA3-T ER1004CL-TF3-T ER1004CG-TF3-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F Pin Assignment 1 2 3 A K A A K A Packing Tube Tube MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R201-093.b ER1004C Preliminary FAST RECOVERY EPITAXIAL DIODE ABSOLUTE MAXIMUM RATINGS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VR 400 V RMS Voltage VRMS 280 V Recurrent Peak Reverse Voltage VRRM 400 V Average Average Forward Current at TC=100°C IF(AV) 10 A Peak Forward Surge Current 8.3ms Single Half Sine-Wave IFSM 150 A Superimposed on Rated Load (JEDEC Method) Operating Junction Temperature TJ -55~+150 °C Storage Temperature TSTG -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (PER LEG) PARAMETER SYMBOL θJA Junction to Ambient Junction to Case TO-220 TO-220F θJC RATINGS 62.5 3 5 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, inductive load. For capacitance load, derate current by 20% PARAMETER SYMBOL TEST CONDITIONS MIN TYP Forward Voltage Drop VF IF=5A DC Reverse Current at Rated DC Blocking TJ=25°C IR Voltage TJ=100°C Reverse Recovery Time (Note 2) trr Junction Capacitance (Note 1) CJ 62 Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Reverse Recovery Test Conditions: IF=0.5A, IR=1A, Irr=0.25A. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw resistive or MAX UNIT 1.3 V 1 μA 500 μA 50 ns pF 2 of 3 QW-R201-093.b ER1004C Preliminary FAST RECOVERY EPITAXIAL DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R201-093.b