BT151X series Thyristors Rev. 04 — 9 June 2004 Product data sheet 1. Product profile 1.1 General description Passivated thyristors in a SOT186A full pack plastic package. 1.2 Features ■ High thermal cycling performance ■ High bidirectional blocking voltage capability ■ Isolated mounting base. 1.3 Applications ■ Motor control ■ Industrial and domestic lighting, heating and static switching. 1.4 Quick reference data ■ VDRM, VRRM ≤ 800 V (BT151X-800) ■ VDRM, VRRM ≤ 650 V (BT151X-650) ■ VDRM, VRRM ≤ 500 V (BT151X-500) ■ IT(RMS) ≤ 12 A ■ IT(AV) ≤ 7.5 A ■ ITSM ≤ 120 A. 2. Pinning information Table 1: Discrete pinning Pin Description 1 cathode (k) 2 anode (a) 3 gate (g) mb mounting base; isolated Simplified outline Symbol mb sym037 1 2 3 SOT186A (TO-220) BT151X series Philips Semiconductors Thyristors 3. Ordering information Table 2: Ordering information Type number Package BT151X-500 Name Description - plastic single-ended package; isolated heatsink mounted; 1 mounting hole; SOT186A 3 lead TO-220 ‘full pack’ BT151X-650 Version BT151X-800 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDRM, VRRM repetitive peak off-state voltage Conditions Min Max Unit BT151X-500 [1] - 500 V BT151X-650 [1] - 650 V - 800 V BT151X-800 IT(AV) average on-state current half sinewave; Ths ≤ 69 °C; Figure 1 - 7.5 A IT(RMS) RMS on-state current all conduction angles; Figure 4 and Figure 5 - 12 A ITSM non-repetitive peak on-state current half sinewave; Tj = 25 °C prior to surge; Figure 2 and Figure 3 - 120 A t = 10 ms - 132 A I2t I2t for fusing t = 10 ms t = 8.3 ms - 72 A2s dIT/dt repetitive rate of rise of on-state current after triggering ITM = 20 A; IG = 50 mA; dIG/dt 50 mA/µs - 50 A/µs IGM peak gate current - 2 A VRGM peak reverse gate voltage - 5 V PGM peak gate power - 5 W PG(AV) average gate power - 0.5 W Tstg storage temperature −40 +150 °C Tj junction temperature - 125 °C [1] over any 20 ms period Although not recommended, off-state voltages up to 800 V may be applied without damage, but the thyristor may switch to the on-state. The rate of rise of current should not exceed 15 A/µs. 9397 750 13162 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 2 of 11 BT151X series Philips Semiconductors Thyristors 001aaa961 15 a= 1.57 Ptot (W) 57.5 Ths(max) (°C) 1.9 2.2 10 80 2.8 4 5 conduction angle (degrees) form factor a 30 60 90 120 180 4 2.8 2.2 1.9 1.57 102.5 α 0 125 0 2 4 6 8 IT(AV) (A) a = form factor = IT(RMS)/IT(AV). Fig 1. Total power dissipation as a function of average on-state current; maximum values. 001aaa957 160 ITSM IT ITSM (A) 120 t tp Tj initial = 25 °C max 80 40 0 1 102 10 n 103 f = 50 Hz. Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values. 9397 750 13162 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 3 of 11 BT151X series Philips Semiconductors Thyristors 001aaa956 103 ITSM dlT/dt limit (A) 102 IT ITSM t tp Tj initial = 25 °C max 10 10−5 10−4 10−3 10−2 tp (s) tp ≤ 10 ms. Fig 3. Non-repetitive peak on-state current as a function of pulse width; maximum values. 001aaa955 25 001aaa960 16 IT(RMS) (A) 20 IT(RMS) (A) 12 15 8 10 4 5 0 10−2 10−1 1 10 surge duration (s) 0 −50 0 50 100 150 Ths (°C) f = 50 Hz; Ths ≤ 87 °C. Fig 4. RMS on-state current as a function of surge duration; maximum values. Fig 5. RMS on-state current as a function of heatsink temperature; maximum values. 9397 750 13162 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 4 of 11 BT151X series Philips Semiconductors Thyristors 5. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Conditions Rth(j-hs) thermal resistance from junction to heatsink Figure 6 without heatsink compound - 6.5 K/W thermal resistance from junction to ambient in free air 55 - K/W Rth(j-a) with heatsink compound Typ Max Unit - 4.5 K/W 001aaa964 10 (1) Zth(j-hs) (K/W) (2) 1 10−1 δ= P tp T 10−2 t tp T 10−3 10−5 10−4 10−3 10−2 10−1 1 10 tp (s) (1) Without heatsink compound. (2) With heatsink compound. Fig 6. Transient thermal impedance as a function of pulse width. 6. Isolation characteristics Table 5: Isolation limiting values and characteristics Ths = 25 °C unless otherwise specified Symbol Parameter Visol Cisol Conditions Typ Max Unit RMS isolation voltage from all f = 50 to 60 Hz; sinusoidal three terminals to external waveform; R.H. ≤ 65%; clean and heatsink dust free - 2500 V capacitance from pin 2 to external heatsink 10 - pF f = 1 MHz 9397 750 13162 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 5 of 11 BT151X series Philips Semiconductors Thyristors 7. Characteristics Table 6: Characteristics Tj = 25 °C unless otherwise stated Symbol Parameter Conditions Min Typ Max Unit Static characteristics IGT gate trigger current VD = 12 V; IT = 0.1 A; Figure 8 - 2 15 mA IL latching current VD = 12 V; IGT = 0.1 A; Figure 10 - 10 40 mA IH holding current VD = 12 V; IGT = 0.1 A; Figure 11 - 7 20 mA VT on-state voltage IT = 23 A; Figure 9 - 1.4 1.75 V VGT gate trigger voltage ID, IR off-state leakage current VD = 12 V; IT = 0.1 A; Figure 7 - 0.6 1.5 V VD = VDRM(max); IT = 0.1 A; Tj = 125 °C 0.25 0.4 - V VD = VDRM(max); VR = VRRM(max); Tj = 125 °C - 0.1 0.5 mA Dynamic characteristics dVD/dt critical rate of rise of off-state voltage VDM = 67% VDRM(max); Tj = 125 °C; exponential waveform; Figure 12 gate open circuit 50 130 - V/µs RGK = 100 Ω 200 1000 - V/µs tgt gate controlled turn-on time ITM = 40 A; VD = VDRM(max); IG = 0.1 A; dIG/dt = 5 A/µs - 2 - µs tq circuit commuted turn-on time VD = 67% VDRM(max); Tj = 125 °C; ITM = 20 A; VR = 25 V; dITM/dt = 30 A/µs; dVD/dt = 50 V/µs; RGK = 100 Ω - 70 - µs 001aaa953 1.6 IGT (Tj) IGT (25 °C) VGT (Tj) VGT (25 °C) 1.2 2 0.8 1 0.4 −50 0 50 100 150 0 −50 Tj (°C) 0 50 100 150 Tj (°C) Fig 7. Normalized gate trigger voltage as a function of junction temperature. Fig 8. Normalized gate trigger current as a function of junction temperature. 9397 750 13162 Product data sheet 001aaa952 3 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 6 of 11 BT151X series Philips Semiconductors Thyristors 001aaa959 30 001aaa951 3 IL (Tj) IL (25 °C) IT (A) 2 20 (1) (2) (3) 1 10 0 0 0.5 1 1.5 2 0 −50 0 50 100 150 Tj (°C) VT (V) VO = 1.06 V. RS = 0.0304 Ω. (1) Tj = 125 °C; typical values. (2) Tj = 125 °C; maximum values. (3) Tj = 25 °C; maximum values. Fig 9. On-state current characteristics. Fig 10. Normalized latching current as a function of junction temperature. 001aaa950 3 001aaa949 104 IH (Tj) IH (25 °C) dVD/dt (V/µs) 2 103 (1) (2) 102 1 0 −50 10 0 50 100 150 0 50 Tj (°C) 100 150 Tj (°C) (1) RGK = 100 Ω. (2) Gate open circuit. Fig 11. Normalized holding current as a function of junction temperature. Fig 12. Critical rate of rise of off-state voltage as a function of junction temperature; minimum values. 8. Package information Epoxy meets requirements of UL94 V-0 at 1⁄8 inch. 9397 750 13162 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 7 of 11 BT151X series Philips Semiconductors Thyristors 9. Package outline Plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3 lead TO-220 'full pack' SOT186A E A A1 P q D1 mounting base T D j L2 L1 K Q b1 L b2 1 2 3 b c w M e e1 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) (1) UNIT A A1 b b1 b2 c D D1 E e e1 j K mm 4.6 4.0 2.9 2.5 0.9 0.7 1.1 0.9 1.4 1.0 0.7 0.4 15.8 15.2 6.5 6.3 10.3 9.7 2.54 5.08 2.7 1.7 0.6 0.4 L L1 14.4 3.30 13.5 2.79 L2 max. P Q q 3 3.2 3.0 2.6 2.3 3.0 2.6 (2) T 2.5 w 0.4 Notes 1. Terminal dimensions within this zone are uncontrolled. Terminals in this zone are not tinned. 2. Both recesses are ∅ 2.5 × 0.8 max. depth OUTLINE VERSION SOT186A REFERENCES IEC JEDEC JEITA 3-lead TO-220F EUROPEAN PROJECTION ISSUE DATE 02-03-12 02-04-09 Fig 13. Package outline. 9397 750 13162 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 8 of 11 BT151X series Philips Semiconductors Thyristors 10. Revision history Table 7: Revision history Document ID Release date Data sheet status Change notice Order number Supersedes BT151X_SERIES_4 20040609 Product specification - 9397 750 13162 BT151X_SERIES_3 Modifications: • The format of this specification has be redesigned to comply with Philips Semiconductors’ new presentation and information standard BT151X_SERIES_3 20030901 Product specification - - BT151X_SERIES_2 BT151X_SERIES_2 19990601 Product specification - - BT151X_SERIES_1 BT151X_SERIES_1 19970901 Product specification - - - 9397 750 13162 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 9 of 11 BT151X series Philips Semiconductors Thyristors 11. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions 13. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 13162 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 9 June 2004 10 of 11 Philips Semiconductors BT151X series Thyristors 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Isolation characteristics . . . . . . . . . . . . . . . . . . 5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package information . . . . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Contact information . . . . . . . . . . . . . . . . . . . . 10 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 9 June 2004 Document order number: 9397 750 13162 Published in The Netherlands