180 CPS www.vishay.com Vishay BCcomponents Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES • Useful life: up to 2500 h at 105 °C • Very low ESR and highest ripple current • SMD-version with base plate, lead (Pb)-free reflow solderable • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 180 CPS 105 °C longer lifetime 181 CPL 105 °C APPLICATIONS • SMD technology, for high temperature reflow soldering Fig. 1 • Industrial and professional applications QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range • Telecommunications and IT VALUE 22 μF to 2700 μF ± 20 % 2.5 V to 35 V -55 °C to +105 °C Endurance test at 105 °C 2000 h Useful life at 105 °C 2500 h Shelf life at 0 V, 105 °C 1000 h Based on sectional specification Climatic category IEC 60068 Revision: 20-May-15 • Portable and mobile equipment 5.3 x 5.3 x 5.7 to 10.4 x 10.4 x 12.6 IEC 60384-18 / CECC 32300 55/105/56 MARKING • Rated capacitance (in μF) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Blue mark or “-” sign indicating the cathode (the anode is identified by bevelled edges) • Code indicating group number (S) PACKAGING Supplied in blister tape on reel Document Number: 28415 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 180 CPS www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (μF) 22 2.5 4.0 6.3 39 56 68 82 100 120 150 180 220 270 330 390 20 25 35 6.6 x 6.6 x 5.9 - - - - 10.4 x 10.4 x 7.7 10.4 x 10.4 x 12.6 8.4 x 8.4 x 12 - - - - - 10.4 x 10.4 x 12.6 - - 8.4 x 8.4 x 12 10.4 x 10.4 x 7.7 - - - - - 10.4 x 10.4 x 12.6 - - - - - - - - - 6.6 x 6.6 x 5.9 6.6 x 6.6 x 7.7 8.4 x 8.4 x 6.7 680 6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7 6.6 x 6.6 x 7.7 8.4 x 8.4 x 12 8.4 x 8.4 x 6.7 - 820 8.4 x 8.4 x 12 1000 10.4 x 10.4 x 7.7 1200 10.4 x 10.4 x 7.7 8.4 x 8.4 x 12 1500 16 5.3 x 5.3 x 5.7 6.6 x 6.6 x 5.9 5.3 x 5.3 x 5.7 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 8.4 x 8.4 x 12 10.4 x 10.4 x 5.3 x 5.3 x 5.7 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 12.6 5.3 x 5.3 x 5.7 6.6 x 6.6 x 7.7 8.4 x 8.4 x 6.7 5.3 x 5.3 x 5.7 8.4 x 8.4 x 12 10.4 x 10.4 x 6.6 x 6.6 x 5.9 7.7 6.6 x 6.6 x 5.9 8.4 x 8.4 x 12 6.6 x 6.6 x 5.9 10.4 x 10.4 x 10.4 x 10.4 x 6.6 x 6.6 x 5.9 12.6 12.6 6.6 x 6.6 x 7.7 470 560 10 8.4 x 8.4 x 12 8.4 x 8.4 x 12 - - - - - - 10.4 x 10.4 x 12.6 - - - - - 10.4 x 10.4 x 12.6 - - - - - - 2700 10.4 x 10.4 x 12.6 - - - - - - - HMAX. MAX. 0.3 Negative polarity A2 S 470 6.3V A2 10 16S Negative polarity 2-pin: Ø 8 mm to 10 mm min. 0.4 / max. 1.0 (2 x) 2-pin: ≤ Ø 6.3 mm D WMAX. S HMAX. MAX. 0.3 D WMAX. B L1MAX. min. 0.4 / max. 1.0 (2 x) 2200 B LMAX. L1MAX. S LMAX. Fig. 2 - Dimensional outline Revision: 20-May-15 Document Number: 28415 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 180 CPS www.vishay.com Vishay BCcomponents Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE LMAX. WMAX. HMAX. ØD BMAX. S L1MAX. MASS (g) 5.3 x 5.3 x 5.7 0506 5.5 5.5 6.0 5.0 0.8 1.5 6.1 ~ 0.15 6.6 x 6.6 x 5.9 0606 6.8 6.8 6.0 6.3 0.8 2.0 7.4 ~ 0.25 6.6 x 6.6 x 7.7 0608 6.8 6.8 8.0 6.3 0.8 2.0 7.4 ~ 0.4 8.4 x 8.4 x 6.7 0807 8.6 8.6 7.0 8.0 1.1 3.1 9.2 ~ 0.5 8.4 x 8.4 x 12 0812 8.6 8.6 12.5 8.0 1.1 3.1 9.2 ~ 0.8 10.4 x 10.4 x 7.7 1008 10.6 10.6 8.0 10 1.3 4.7 11.2 ~ 0.9 10.4 x 10.4 x 12.6 1013 10.6 10.6 12.7 10 1.3 4.7 11.2 ~ 1.3 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 5.3 x 5.3 x 5.7 0506 12 12 6.2 380 1000 6.6 x 6.6 x 5.9 0606 12 16 6.2 380 1000 6.6 x 6.6 x 7.7 0608 12 16 8.3 380 1000 8.4 x 8.4 x 6.7 0807 12 16 6.8 380 1000 8.4 x 8.4 x 12 0812 16 16 13.0 380 400 10.4 x 10.4 x 7.7 1008 16 24 10.0 380 500 10.4 x 10.4 x 12.6 1013 16 24 14.0 380 400 MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For maximum conditions refer to Fig. 4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. b a c a Fig. 3 - Recommended soldering pad dimensions Revision: 20-May-15 Document Number: 28415 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 180 CPS www.vishay.com Vishay BCcomponents Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c 0506 1.4 3.0 1.6 0606 1.9 3.5 1.6 0608 1.9 3.5 1.6 0807 3.0 3.5 2.5 0812 3.0 3.5 2.5 1008 4.0 4.0 2.5 1013 4.0 4.0 2.5 ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS T (°C) TPeak 230 217 t4 t3 200 190 t2 150 t1 25 time (s) Fig. 4 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL2180xxxE3 PROFILE FEATURES Max. time from 25 °C to TPeak CASE CODE 0506 TO 1013 300 s Max. ramp-up rate to 150 °C 3 K/s Max. time from 150 °C to 200 °C (t1) 150 s Max. time from 190 °C to 200 °C (t2) Ramp up rate from 200 °C to TPeak Max. time above TLiquidus (217 °C) (t3) Max. time above 230 °C (t4) Peak temperature TPeak Max. time above TPeak minus 5 °C Ramp-down rate from TLiquidus 110 s 0.5 K/s to 3 K/s 90 s 70 s 260 °C 40 s 3 K/s to 6 K/s Note • Temperature measuring point on top of the case and on terminals. Revision: 20-May-15 Document Number: 28415 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 180 CPS www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Conductive polymer 180 CPS series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 kHz, 105 °C IL2 Max. leakage current after 2 min at UR tan Max. dissipation factor at 100 Hz Z Max. impedance at 100 kHz 100 μF / 16 V; ± 20 % Nominal case size: 6.6 mm x 6.6 mm x 5.9 mm; taped on reel Ordering code: MAL218097504E3 Note • Unless otherwise specified, all electrical values in Table 5 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 5 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 2.5 4 6.3 10 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 105 °C 100 kHz (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz 20 °C () ORDERING CODE MAL2180... 180 5.3 x 5.3 x 5.7 2800 300 0.12 0.019 97251E3 390 6.6 x 6.6 x 5.9 3160 300 0.12 0.014 97253E3 560 6.6 x 6.6 x 5.9 3500 300 0.12 0.016 97254E3 560 6.6 x 6.6 x 7.7 4200 420 0.12 0.009 97255E3 680 8.4 x 8.4 x 6.7 3370 500 0.12 0.020 97256E3 820 8.4 x 8.4 x 12 5380 500 0.12 0.009 97257E3 1200 10.4 x 10.4 x 7.7 4450 600 0.15 0.013 97258E3 1500 8.4 x 8.4 x 12 5150 750 0.12 0.012 97259E3 2700 10.4 x 10.4 x 12.6 5600 1350 0.15 0.009 97261E3 150 5.3 x 5.3 x 5.7 2730 300 0.12 0.020 97701E3 270 6.6 x 6.6 x 5.9 3160 300 0.12 0.015 97702E3 330 6.6 x 6.6 x 5.9 3160 300 0.12 0.015 97703E3 390 6.6 x 6.6 x 7.7 4200 468 0.12 0.009 97704E3 560 8.4 x 8.4 x 6.7 3220 500 0.12 0.022 97705E3 560 8.4 x 8.4 x 12 5380 500 0.15 0.009 97706E3 1000 10.4 x 10.4 x 7.7 4300 800 0.12 0.014 97707E3 1200 8.4 x 8.4 x 12 4700 960 0.15 0.012 97708E3 1500 8.4 x 8.4 x 12 4700 1200 0.15 0.012 97709E3 2200 10.4 x 10.4 x 12.6 5700 1760 0.15 0.009 97711E3 120 5.3 x 5.3 x 5.7 2660 300 0.12 0.021 97301E3 220 6.6 x 6.6 x 5.9 3160 300 0.12 0.015 97303E3 330 6.6 x 6.6 x 5.9 3390 415 0.12 0.017 97304E3 330 6.6 x 6.6 x 7.7 4200 623 0.12 0.009 97305E3 390 8.4 x 8.4 x 6.7 3220 491 0.12 0.022 97306E3 820 8.4 x 8.4 x 12 4700 1033 0.15 0.013 97307E3 820 10.4 x 10.4 x 7.7 4300 1033 0.12 0.014 97308E3 1500 10.4 x 10.4 x 12.6 5560 1890 0.15 0.010 97309E3 68 5.3 x 5.3 x 5.7 2540 300 0.12 0.023 97401E3 120 6.6 x 6.6 x 5.9 2600 300 0.12 0.022 97402E3 150 6.6 x 6.6 x 7.7 2800 450 0.12 0.015 97403E3 270 8.4 x 8.4 x 6.7 3220 500 0.12 0.022 97404E3 470 10.4 x 10.4 x 7.7 3800 940 0.12 0.019 97405E3 Revision: 20-May-15 Document Number: 28415 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 180 CPS www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 16 20 25 35 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 105 °C 100 kHz (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz 20 °C () ORDERING CODE MAL2180... 39 5.3 x 5.3 x 5.7 2350 300 0.12 0.020 97501E3 39 6.6 x 6.6 x 5.9 2460 300 0.12 0.024 97502E3 68 6.6 x 6.6 x 5.9 2440 300 0.12 0.025 97503E3 100 6.6 x 6.6 x 5.9 2490 320 0.12 0.024 97504E3 150 8.4 x 8.4 x 6.7 3220 500 0.12 0.022 97505E3 220 10.4 x 10.4 x 7.7 3450 704 0.12 0.022 97506E3 270 8.4 x 8.4 x 12 4850 864 0.15 0.012 97507E3 330 10.4 x 10.4 x 12.6 5300 1056 0.15 0.012 97508E3 470 10.4 x 10.4 x 12.6 6100 1504 0.15 0.010 97509E3 820 10.4 x 10.4 x 12.6 5400 2624 0.12 0.012 97511E3 120 6.6 x 6.6 x 5.9 3200 480 0.12 0.025 97201E3 390 8.4 x 8.4 x 12 4950 1560 0.12 0.014 97202E3 560 10.4 x 10.4 x 12.6 5600 2240 0.12 0.012 97203E3 56 6.6 x 6.6 x 5.9 2800 280 0.12 0.030 97601E3 180 8.4 x 8.4 x 12 4650 900 0.12 0.016 97602E3 330 10.4 x 10.4 x 12.6 5000 1650 0.12 0.014 97603E3 22 6.6 x 6.6 x 5.9 2600 154 0.12 0.035 97001E3 82 8.4 x 8.4 x 12 4000 574 0.12 0.020 97002E3 120 10.4 x 10.4 x 12.6 4400 840 0.12 0.018 97003E3 Table 6 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE IEC 60384-18, subclause 4.14 Us 1.15 x UR IEC 60384-18, subclause 4.16; TA 105 °C Urev 1 V Voltage Surge voltage for short periods Reverse voltage for short periods USEFUL LIFE AND ENDURANCE Table 7 ENDURANCE TEST AND USEFUL LIFE SERIES CASE CODE USEFUL LIFE AT 105 °C (h) ENDURANCE AT 105 °C (h) ENDURANCE AT 95 °C (h) ENDURANCE AT 85 °C (h) ENDURANCE AT 75 °C (h) 180 CPS 0506 - 1013 2500 2000 6000 20 000 63 000 Endurance can be calculated by formula below: L r = L 0 x 10 T0 - Tr ----------------20 Lr: estimated lifetime (h) L0: base lifetime specified at maximum operating temperature with applied the DC voltage (h) T0: rated maximum operating temperature (°C) Tr: actual ambient temperature (°C) Revision: 20-May-15 Document Number: 28415 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 180 CPS www.vishay.com Vishay BCcomponents Table 8 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Mounting IEC 60384-18, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” C/C: ± 5 % tan spec. limit IL2 spec. limit Endurance IEC 60384-18 / CECC 32300, subclause 4.15 Tamb = 105 °C; UR applied; for test duration see Table 7 C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 105 °C; UR and IR applied; for test duration see Table 7 C/C: ± 30 % tan 3 x spec. limit IL2 spec. limit Shelf life (storage at high temperature) IEC 60384-18 / CECC 32300, subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see “Endurance test” above Revision: 20-May-15 Document Number: 28415 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000