EURO QUARTZ EMEM1102/1122 - MEMS OSCILLATOR Low Jitter Precision LVPECL Oscillator 10MHz to 460.0MHz Page 1 of 4 Features Frequency Range 10MHz to 460MHz Frequency Stability ±10, ±25 or ±50ppm Operating Voltage: 1.71V to 3.60V Operating Temperature Range Industrial: -40° to +85°C Ext. Commercial: -20° to +70°C High Supply Noise Rejection: -50dBc Short Lead Time Ultra-Miniature Footprints 2.5 x 2.0 x 0.85mm 3.2 x 2.5 x 0.85mm 5.0 x 3.2 x 0.85mm 7.0 x 5.0 x 0.85mm Excellent Shock & Vibration Resistance Qualified to MIL-STD-883 High Reliability Low Current Consumption Supply Voltage from 2.25 to 3.6 Volts Standby and Output Enable Function LVDS and HCSL versions available Description The Euroquartz EMEM1102 and EMEM1122 series of high performance oscillators utilize MEMS (Micro Electro-Mechanical System) technology, offering excellent jitter and stability performance over a wide range of supply voltages and temperature ranges. The EMEM1102 has a standby feature allowing it to completely power down when the 'EN' pin is pulled low; the EMEM1122 outputs are disabled when EN is low. Both oscillators are available in industry-standard oscillator packages, including the small 2.5 x 2.0mm and are 'drop-in' replacements for standard LVPECL quartz crystal oscillators. Electrical Specifications Parameter Symbol Condition Supply Current Min. Typ. 2.25 Supply Voltage1 IDD EN pin low - outputs disabled EMEM1102 EMEM1122 Includes frequency variations due to initial tolerance, temp. and power supply voltage. 20 Max. Unit 3.6 V 0.095 22 ±10 ±25 ±50 mA Frequency Stability ∆f Ageing ∆f 1 year @ 25° ±5 ppm Startup Time2 Input Logic Levels Input Logic High Input Logic Low TSU T = 25°C 5 ms Output Disable Time3 TDA Output Enable Time TEN VIH VIL Enable Pull-up Resistor ppm V 0.75*VDD 0.25*VDD EMEM1102 EMEM1122 Pull-up resistor exists 5 ns 5 20 ms ns kΩ 58 mA VDD -1.55 V 40 LVPECL Outputs Supply Current IDD Output Enabled, RL = 50Ω Output Logic Levels Output Logic High Output Logic Low VOH VOL RL = 50Ω Pk to Pk Output Swing 56.5 VDD -1.08 - Single-Ended 800 mV 20% to 80% RL = 50Ω, CL = 0pF 250 ps Output Transition Time3 Rise Time Fall Time tR tF Frequency F0 Single Frequency 10 SYM Differential 48 Output Duty Cycle Period Jitter JPER Integrated Phase Noise JPH Notes: 1. 2. 3. 4. 460 52 2.5 200kHz to 20MHz @156.25MHz 100kHz to 20MHz @156.25MHz 12kHz to 20MHz @156.25MHz 0.25 0.38 1.7 MHz % psRMS psRMS 2 Pin 6 VDD should be filtered with 0.1µF capacitor. tSU is time to 100ppm of output frequency after VDD is applied and outputs are enabled. Output waveform and test circuit figures below define the parameters. Output is enabled if pad is floated or not connected. EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk EURO QUARTZ EMEM1102/1122 - MEMS OSCILLATOR Low Jitter Precision LVPECL Oscillator 10MHz to 460.0MHz Page 2 of 4 Output Enable Modes Absolute Maximum Ratings EN Pin DSC1102 DSC1122 High Outputs Active Outputs Active NC Low Outputs Active Standby Outputs Active Outputs Disabled Item Supply Voltage Input Voltage Junction Temp. Storage Temp. Soldering Temp. ESD HBM MM CDM Min. -0.3 -0.3 -55 - Max. +4.0 VDD+0.3 +150 +150 +260 4000 400 1500 Unit Condition V V °C °C °C 40 sec. max. V Ordering Code Enable Modes 0: Enable/Standby 2: Enable/Disable Temp Range E: -20 to 70 I: -40 to 85 L: -40 to 105 M: -55 to 125 EMEM1102 C I 5 Package A: 7.0 x 5.0mm B: 5.0 x 3.2mm C: 3.2 x 2.5mm D: 2.5 x 2.0mm - 125.000 Stability 1: ±50ppm 2: ±25ppm 5: ±10ppm Typical Termination Scheme Packing T: Tape & Reel : Tube T Freq. (MHz) 125.000 Nominal Performance Parameters (Unless specified otherwise: T = 25°C, VDD = 3.3V) Output Waveform EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk EURO QUARTZ EMEM1102/1122 - MEMS OSCILLATOR Low Jitter Precision LVPECL Oscillator Solder Reflow Profile 10MHz to 460.0MHz Page 3 of 4 MSL1 @ 260°C refer to JSTD-020C Ramp-up Rate (200°C to Peak Temp.) 3°C/s max. Preheat Time 150°C to 200°C 60-180s Time maintained above 217°C 60-150s Peak Temperature 255-260°C Time within 5°C of actual peak 20-40s Ramp-Down Rate 6°C/s max. Time 25°C to Peak Temperature 8 min max. PACKAGE DIMENSIONS 7.0 x 5.0mm Plastic Package 5.0 x 3.2mm Plastic Package EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk EURO QUARTZ EMEM1102/1122 - MEMS OSCILLATOR Low Jitter Precision LVPECL Oscillator 3.2 x 2.5mm Plastic Package 10MHz to 460.0MHz Page 4 of 4 2.5 x 2.0mm Plastic Package EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk