Littelfuse L6X3 Rohs compliant Datasheet

s
ge
ka
*
L.
U.
ED
Z
NI
E1
G 39
CO 716
E
R #E
ed
ct
le
Se
c
Pa
Fi
le
TO-92
*TO-220
Isolated
3-lead
Compak
TO-252
D-Pak
TO-202
MT2
MT1
TO-251
V-Pak
G
Sensitive Triacs
(0.8 A to 8 A)
RoHS
E1
General Description
Teccor's line of sensitive gate triacs includes devices with current
capabilities through 8 A. Voltage ranges are available from 200 V
to 600 V. This line features devices with guaranteed gate control
in Quadrants II and IV as well as control in the commonly used
Quadrants I and III. Four-quadrant control devices require
sensitive gate triacs. They can be controlled by digital circuitry
where positive-only or negative-only pulses must control AC
current in both directions through the device. Note that triacs with
low IGT values in Quadrants II and IV will have lower dv/dt
characteristics.
The sensitive gate triac is a bidirectional AC switch and is gate
controlled for either polarity of main terminal voltage. It is used
primarily for AC switching and phase control applications such as
motor speed controls, temperature modulation controls, and
lighting controls.
The epoxy TO-92 and TO-220 configurations feature Teccor's
electrically-isolated construction where the case or mounting tab
is internally isolated from the semiconductor chip and lead
attachments. Non-isolated epoxy TO-202 packages are available
as well as TO-251 and surface mount TO-252 (D-Pak). Tapeand-reel capability and tube packing also are available. See
“Packing Options” section of this catalog.
Variations of devices covered in this data sheet are available for
custom design applications. Consult factory for more information.
Features
•
•
•
•
•
•
RoHS Compliant
Electrically-isolated packages
Glass-passivated junctions ensure long device
reliability and parameter stability
Voltage capability — up to 600 V
Surge capability — up to 80 A
Four-quadrant gating guaranteed
Compak Sensitive Gate Triac
•
•
•
•
Surface mount package — 0.8 A and 1 A series
New small profile three-leaded Compak package
Packaged in embossed carrier tape with 2,500
devices per reel
Can replace SOT-223
All Teccor triacs have glass-passivated junctions. This glassing
process prevents migration of contaminants and ensures longterm device reliability with parameter stability.
©2004 Littelfuse, Inc.
Thyristor Product Catalog
E1 - 1
http://www.littelfuse.com
+1 972-580-7777
Sensitive Triacs
Data Sheets
Part No.
IT(RMS)
Isolated
Non-isolated
(11)
MT2
IGT
IDRM
(1)
(3) (6) (9)
(1) (14)
mAmps
mAmps
TC =
TC =
25 °C 110 °C
MAX
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.1
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
0.01
0.2
MT2
MT2
G
VDRM
G
MT2
MT1
MT1
MT2
MT1
MT2
G
TO-92
MAX
0.8 A
1A
L2X8E3
L4X8E3
L6X8E3
L2X8E5
L4X8E5
L6X8E5
L2X8E6
L4X8E6
L6X8E6
L2X8E8
L4X8E8
L6X8E8
L201E3
L401E3
L601E3
L201E5
L401E5
L601E5
L201E6
L401E6
L601E6
L201E8
L401E8
L601E8
4A
Compak
G
MT1
MT1
MT2
TO-220
TO-252
D-Pak
G
MT2
TO-202
G
MT1
MT2
TO-251
V-Pak
Volts
QI
L2004V3
L4004V3
L6004V3
L2004V5
L4004V5
L6004V5
L2004V6
L4004V6
L6004V6
L2004V8
L4004V8
L6004V8
MIN
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
3
3
3
5
5
5
5
5
5
10
10
10
3
3
3
5
5
5
5
5
5
10
10
10
3
3
3
5
5
5
5
5
5
10
10
10
See “Package Dimensions” section for variations. (12)
L2X3
L4X3
L6X3
L2X5
L4X5
L6X5
L2N3
L4N3
L6N3
L2N5
L4N5
L6N5
L2004L3
L4004L3
L6004L3
L2004L5
L4004L5
L6004L5
L2004L6
L4004L6
L6004L6
L2004L8
L4004L8
L6004L8
L2004D3
L4004D3
L6004D3
L2004D5
L4004D5
L6004D5
L2004D6
L4004D6
L6004D6
L2004D8
L4004D8
L6004D8
L2004F31
L4004F31
L6004F31
L2004F51
L4004F51
L6004F51
L2004F61
L4004F61
L6004F61
L2004F81
L4004F81
L6004F81
QII QIII
MAX
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
10
10
10
10
10
10
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
10
10
10
10
10
10
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
5
5
10
10
10
10
10
10
QIV
3
3
3
5
5
5
10
10
10
20
20
20
3
3
3
5
5
5
10
10
10
20
20
20
3
3
3
5
5
5
10
10
10
20
20
20
See “General Notes” on page E1 - 4 and “Electrical Specification Notes” on page E1 - 5.
http://www.littelfuse.com
+1 972-580-7777
E1 - 2
©2004 Littelfuse, Inc.
Thyristor Product Catalog
Data Sheets
Sensitive Triacs
VTM
VGT
IH
IGTM
PGM
(1) (4)
(2) (5) (15)
(1) (7)
(13)
(13)
Volts
TC =
25 °C
MAX
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
Volts
TC =
25 °C
MAX
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
PG(AV)
MAX
5
5
5
10
10
10
10
10
10
15
15
15
5
5
5
10
10
10
10
10
10
15
15
15
5
5
5
10
10
10
10
10
10
15
15
15
Amps
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
Watts
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
15
15
15
Watts
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
di/dt
µSec
Amps2Sec
Amps/µSec
TYP
2.8
2.8
2.8
3
3
3
3
3
3
3.2
3.2
3.2
2.8
2.8
2.8
3
3
3
3
3
3
3.2
3.2
3.2
2.8
2.8
2.8
3
3
3
3
3
3
3.2
3.2
3.2
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
0.41
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
50
50
50
50
50
50
50
50
50
50
50
50
dv/dt(c)
dv/dt
tgt
(8) (10)
(1) (10)
(1)
(9)
Amps
mAmps
I2 t
ITSM
60/50 Hz
Volts/µSec
10/8.3
10/8.3
10/8.3
10/8.3
10/8.3
10/8.3
10/8.3
10/8.3
10/8.3
10/8.3
10/8.3
10/8.3
20/16.7
20/16.7
20/16.7
20/16.7
20/16.7
20/16.7
20/16.7
20/16.7
20/16.7
20/16.7
20/16.7
20/16.7
40/33
40/33
40/33
40/33
40/33
40/33
40/33
40/33
40/33
40/33
40/33
40/33
TYP
0.5
0.5
0.5
1
1
1
1
1
1
2
2
2
0.5
0.5
0.5
1
1
1
1
1
1
1
1
1
0.5
0.5
0.5
1
1
1
1
1
1
2
2
2
Volts/µSec
TC =
100 °C
TYP
20
15
10
20
15
10
30
25
20
35
30
25
20
20
10
20
20
10
30
30
20
35
35
25
25
25
15
25
25
15
30
30
20
35
35
25
See “General Notes” on page E1 - 4 and “Electrical Specification Notes” on page E1 - 5.
©2004 Littelfuse, Inc.
Thyristor Product Catalog
E1 - 3
http://www.littelfuse.com
+1 972-580-7777
Sensitive Triacs
Data Sheets
Part No.
IT(RMS)
Isolated
Non-isolated
(11)
VDRM
IGT
IDRM
(1)
(3) (6)
(1) (14)
MT2
MT2
G
MT2
MT1
MT2
MT2
TO-220
MAX
6A
8A
G
MT1
G
MT1
TO-252
D-Pak
TO-251
V-Pak
See “Package Dimensions” section for variations. (12)
L2006L5
L2006D5
L2006V5
L4006L5
L4006D5
L4006V5
L6006L5
L6006D5
L6006V5
L2006L6
L2006D6
L2006V6
L4006L6
L4006D6
L4006V6
L6006L6
L6006D6
L6006V6
L2006L8
L2006D8
L2006V8
L4006L8
L4006D8
L4006V8
L6006L8
L6006D8
L6006V8
L2008L6
L2008D6
L2008V6
L4008L6
L4008D6
L4008V6
L6008L6
L6008D6
L6008V6
L2008L8
L2008D8
L2008V8
L4008L8
L4008D8
L4008V8
L6008L8
L6008D8
L6008V8
Volts
QI
MIN
200
400
600
200
400
600
200
400
600
200
400
600
200
400
600
5
5
5
5
5
5
10
10
10
5
5
5
10
10
10
mAmps
QII
QIII
MAX
5
5
5
5
5
5
5
5
5
5
5
5
10
10
10
10
10
10
5
5
5
5
5
5
10
10
10
10
10
10
QIV
5
5
5
10
10
10
20
20
20
10
10
10
20
20
20
mAmps
TC = 25 °C TC = 110 °C
MAX
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
0.02
0.5
Specified Test Conditions
General Notes
di/dt — Maximum rate-of-change of on-state current; IGT = 50 mA with
0.1 µs rise time
•
All measurements are made with 60 Hz resistive load and at an
ambient temperature of +25 °C unless otherwise specified.
dv/dt — Critical rate-of-rise of off-state voltage at rated VDRM gate open
•
dv/dt(c) — Critical rate-of-rise of commutation voltage at rated VDRM
and IT(RMS) commutating di/dt = 0.54 rated IT(RMS)/ms; gate
unenergized
Operating temperature range (TJ) is -65 °C to +110 °C for TO-92
devices and -40 °C to +110 °C for all other devices.
•
Storage temperature range (TS) is -65 °C to +150 °C for TO-92
devices, -40 °C to +150 °C for TO-202 devices, and -40 °C to
+125 °C for TO-220 devices.
•
Lead solder temperature is a maximum of 230 °C for 10 seconds
maximum at a minimum of 1/16” (1.59 mm) from case.
•
The case or lead temperature (TC or TL) is measured as shown on
dimensional outline drawings. See “Package Dimensions” section
of this catalog.
I2t — RMS surge (non-repetitive) on-state current for period of 8.3 ms
for fusing
IDRM — Peak off-state current, gate open; VDRM = max rated value
IGT — DC gate trigger current in specific operating quadrants;
VD = 12 V dc; RL = 60 Ω
IGTM — Peak gate trigger current
IH — Holding current gate open; initial on-state current = 100 mA dc
IT(RMS) — RMS on-state current conduction angle of 360°
ITSM — Peak one-cycle surge
PG(AV) — Average gate power dissipation
PGM — Peak gate power dissipation; IGT ≤ IGTM
tgt — Gate controlled turn-on time; IGT = 50 mA with 0.1 µs rise time
VDRM — Repetitive peak off-state/blocking voltage
VGT — DC gate trigger voltage; VD = 12 V dc; RL = 60 Ω
VTM — Peak on-state voltage at max rated RMS current
http://www.littelfuse.com
+1 972-580-7777
E1 - 4
©2004 Littelfuse, Inc.
Thyristor Product Catalog
Data Sheets
Sensitive Triacs
VTM
VGT
IH
IGTM
PGM
(1) (4)
(2) (5) (15)
(1) (7)
(13)
(13)
Volts
TC = 25 °C
MAX
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
Volts
TC = 25 °C
MAX
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
mAmps
Amps
Watts
MAX
10
10
10
10
10
10
20
20
20
10
10
10
20
20
20
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
PG(AV)
Watts
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
I2 t
di/dt
µSec
Amps2Sec
Amps/µSec
TYP
3
3
3
3
3
3
3.2
3.2
3.2
3
3
3
3.2
3.2
3.2
15
15
15
15
15
15
15
15
15
26.5
26.5
26.5
26.5
26.5
26.5
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
ITSM
dv/dt(c)
dv/dt
tgt
(8) (10)
(1) (10)
(1)
(9)
Amps
60/50 Hz
Volts/µSec
60/50
60/50
60/50
60/50
60/50
60/50
60/50
60/50
60/50
80/65
80/65
80/65
80/65
80/65
80/65
TYP
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
Volts/µSec
TC = 100 °C
TYP
40
30
20
40
30
20
45
40
30
40
30
20
45
40
30
Electrical Specification Notes
Gate Characteristics
(1)
For either polarity of MT2 with reference to MT1 terminal
(2)
For either polarity of gate voltage VGT with reference to MT1
terminal
Teccor triacs may be turned on between gate and MT1 terminals
in the following ways:
(3)
See Gate Characteristics and Definition of Quadrants.
(4)
See Figure E1.4 for iT versus vT.
(5)
See Figure E1.6 for VGT versus TC.
(6)
See Figure E1.7 for IGT versus TC.
(7)
See Figure E1.5 for IH versus TC.
(8)
See Figure E1.9 for surge rating and specific duration.
(9)
See Figure E1.8 for tgt versus IGT.
•
In-phase signals (with standard AC line) using Quadrants I
and III
•
Application of unipolar pulses (gate always positive or negative), using Quadrants II and III with negative gate pulses and
Quadrants I and IV with positive gate pulses
When maximum surge capability is required, pulses should be a
minimum of one magnitude above IGT rating with a steep rising
waveform (≤1 µs rise time).
(10) See Figure E1.2 and Figure E1.3 for maximum allowable case
temperature at maximum rated current.
ALL POLARITIES ARE REFERENCED TO MT1
(11) See Figure E1.1, Figure E1.2, and Figure E1.3 for TA or TC versus
IT(RMS).
MT2
(12) See package outlines for lead form configurations. When ordering
special lead forming, add type number as suffix to part number.
(-)
(13) Pulse width ≤10 µs
MT2 POSITIVE
(Positive Half Cycle)
+
IGT
GATE
(+)
MT2
IGT
GATE
MT1
(14) TC or TL = TJ for test conditions in off state
(15) Minimum non-trigger VGT at 110 °C is 0.2 V.
IGT
REF
IGT
GATE
(+)
MT1
REF
REF
QII QI
QIII QIV
MT2
(-)
MT1
-
+
IGT
MT2
IGT
GATE
MT2 NEGATIVE
(Negative Half Cycle)
MT1
REF
Definition of Quadrants
©2004 Littelfuse, Inc.
Thyristor Product Catalog
E1 - 5
http://www.littelfuse.com
+1 972-580-7777
Sensitive Triacs
Data Sheets
Electrical Isolation
Teccor’s isolated triac packages withstand a minimum high
potential test of 2500 V ac rms from leads to mounting tab over
the device's operating temperature range. The following isolation
table shows standard isolation ratings.
Electrical Isolation
from Leads to Mounting Tab
V AC RMS
TO-220 *
2500
Standard
*UL Recognized File #E71639
Thermal Resistance (Steady State) Junction to Mounting Tab
and Junction to Ambient
RθJC [RθJA] °C/W (TYP)
Package Code
E
C
F
L
F2
D
V
TO-92
Plastic
Compak
TO-202
Type 1
TO-220
Isolated
TO-202
Type 2
TO-252
D-Pak
TO-251
V-Pak
3.5 [45]
3.6 [50]
6.0 [70]
3.5
6.0 [70]
Type
0.8 A
60 [135]
60 *
1A
50 [95]
40 *
4A
6A
3.3
3.2
3.2
8A
2.8
2.7
2.7
120
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360˚
FREE AIR RATING – NO HEATSINK
100
Maximum Allowable Case Temperature (TC) – ˚C
Maximum Allowable Ambient Temperature (TA) - ˚C
* Mounted on 1 cm2 copper foil surface; two-ounce copper foil
TO-220 and
TYPE 1 and 3 TO-202
80
TYPE 2 and 4 TO-202
and TO-251
60
1 A TO-92
40
0.8 A TO-92
25
20
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
110
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360˚
CASE TEMPERATURE: Measured as
shown on Dimensional Drawings
100
90
80
1A
70
0.8 A
60
50
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
RMS On-State Current [IT(RMS)] – Amps
RMS On-State Current [IT(RMS)] - Amps
Figure E1.1 Maximum Allowable Ambient Temperature versus
On-state Current
http://www.littelfuse.com
+1 972-580-7777
Figure E1.2 Maximum Allowable Case Temperature versus
On-state Current (0.8 A and 1 A)
E1 - 6
©2004 Littelfuse, Inc.
Thyristor Product Catalog
Data Sheets
Sensitive Triacs
2.0
100
CONDUCTION ANGLE: 360˚
CASE TEMPERATURE: Measured as
shown on Dimensional Drawings
6A
90
85
80
8A
TO
TO
-25
8A
1a
-22
nd
TO
0(
TO
-22
Iso
-25
0(
2
lat
Iso
ed
late
)
d)
4 A TYPE 1 and 3 TO-202
4 A TO-220 (Isolated)
4 A TO-252
75
VGT
95
1.5
VGT (TC = 25 ˚C)
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
1.0
Ratio of
Maximum Allowable Case Temperature (TC) - ˚C
110
105
6 A TO-251
6 A TO-252
.5
70
4 A TYPE 2 and 4 TO-202
4 A TO-251
65
0
60
0
1
2
3
4
5
6
7
-65
8
-40
-15
+25
+65
+110 +125
Case Temperature (TC) - ˚ C
RMS On-State Current [IT(RMS)] - Amps
Figure E1.3 Maximum Allowable Case Temperature versus
On-state Current (4 A, 6 A, and 8 A)
Figure E1.6 Normalized DC Gate Trigger Voltage for All Quadrants
versus Case Temperature
20
TC = 25 ˚ C
4.0
6 A and 8 A
14
IGT
12
10
4A
8
1A
6
IGT (T = 25 ˚C)
C
16
Ratio of
Positive or Negative Instantaneous
On-state Current (iT) - Amps
18
4
2
3.0
2.0
1.0
0.8 A
0
0
-65
0
0.5
0.8
1.0
1.2
1.4
1.6
-40
-15
+25
+65
+110 +125
1.8
Case Temperature (TC) - ˚C
Positive or Negative Instantaneous
On-state Voltage (vT) - Volts
Figure E1.7 Normalized DC Gate Trigger Current for All Quadrants
versus Case Temperature
Figure E1.4 On-state Current versus On-state Voltage (Typical)
7.0
4.0
TC = 25 ˚C
3.0
IGT = 5 mA MAX
Turn-On Time (tgt) - µSec
IH (TC = 25 ˚C)
Ratio of
IH
6.0
INITIAL ON-STATE CURRENT
= 100 mA (DC) 0.8 - 4 A Devices
= 200 mA (DC) 6 - 8 A Devices
2.0
1.0
5.0
IGT = 10 mA MAX
4.0
IGT = 20 mA
MAX
3.0
IGT = 3 mA MAX
2.0
1.0
0
-65
-40
-15
+25
+65
0
+110 +125
1
Case Temperature (TC) - ˚C
3
4
5 6
8
10
20
30
40
60 80 100
DC Gate Trigger Current (IGT) - mA
Figure E1.5 Normalized DC Holding Current versus Case Temperature
©2004 Littelfuse, Inc.
Thyristor Product Catalog
2
Figure E1.8 Turn-on Time versus Gate Trigger Current (Typical)
E1 - 7
http://www.littelfuse.com
+1 972-580-7777
Sensitive Triacs
Data Sheets
200
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-state Current: [IT(RMS)]: Maximum
Rated Value at Specified Case Temperature
Peak Surge (Non-Repetitive)
On-State Current (ITSM) – Amps
150
100
80
NOTES:
1) Gate control may be lost during
and immediately following surge
current interval.
2) Overload may not be repeated until
junction temperature has returned
to steady-state rated value.
60
40
30
8A
20
6A
4A
10
8
6
4
3
1A
2
0.8 A
1
1
2
3 4
6 8 10
20 30 40 60
100
200
400 600 1000
Surge Current Duration – Full Cycles
Figure E1.9 Peak Surge Current versus Surge Current Duration
1.5
1.0
0.8 A
1A
0.5
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360˚
8.0
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360˚
Average On-state Power Dissipation
[PD(AV)] – Watts
Average On-state Power Dissipation
[PD(AV)] – Watts
9.0
7.0
6.0
6 A and 8 A
5.0
4.0
4A
3.0
2.0
1.0
0
0
0.25
0.50
0.75
1.0
1.25
1.5
0
RMS On-state Current [IT(RMS)] – Amps
0
.5
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0
RMS On-state Current [IT(RMS)] – Amps
Figure E1.10 Power Dissipation (Typical) versus RMS On-state Current
(0.8 A and 1 A)
http://www.littelfuse.com
+1 972-580-7777
Figure E1.11 Power Dissipation (Typical) versus RMS On-state Current
(4 A, 6 A, and 8 A)
E1 - 8
©2004 Littelfuse, Inc.
Thyristor Product Catalog
Similar pages