Chongqing HS1D 1.0amp. high efficiency plastic rectifier Datasheet

HS1A THRU HS1M
1.0AMP. HIGH EFFICIENCY PLASTIC RECTIFIER
SMA(DO-214AC)
FEATURE
.Low leakage
.Low forward voltage drop
.High current capability
.High surge capability
.High reliability
.High temperature soldering guaranteed:
260°C /10 seconds at terminals.
.For surface mounted application.
.Easy pick and place.
Fig1: SMA/DO-214AC*
FOR OPEN JUNCTION DICE PACKAGING OUTLINE
Fig2: SMA/DO-214AC
FOR GLASS PASSIVATED DICE PACKAGING OUTLINE
MECHANICAL DATA
NO
A
B
C
D
E
F
G
.Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
.Case: Molded with UL-94 Class V-0 recognized
Flame Retardant Epoxy
.Polarity: color band denotes cathode
.Mounting position: any
Fig1(mm)
1.9~2.4
1.2~1.8
0.23MAX
2.4~2.9
3.8~4.6
0.8~1.8
4.8~5.8
Fig2(mm)
1.98~2.3
1.35~1.6
0.2MAX
2.4~2.9
3.8~4.6
0.8~1.8
4.8~5.8
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%
Type Number
SYMBOL HS1A HS1B HS1D HS1F HS1G HS1J HS1K HS1M
units
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
300
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
210
280
420
560
700
V
Maximum DC blocking Voltage
VDC
50
100
200
300
400
600
800
1000
V
Maximum Average Forward Rectified Current
.375"(9.5mm) lead length at TA =55°C
IF(AV)
1.0
A
IFSM
30
A
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
method)
Maximum Instantaneous forward Voltage at
1.0A DC
Maximum DC Reverse Current
at rated DC blocking voltage
@TA =25°C
@TA =100°C
VF
1.0
1.3
1.7
5.0
IR
V
µA
100.0
Maximum Reverse Recovery Time (Note 1)
trr
50
75
ns
Typical Junction Capacitance (Note 2)
CJ
20
15
pF
Typical Thermal Resistance (Note 3)
R(JA)
75
°C/W
Storage Temperature
TSTG
-55 to +150
°C
TJ
-55 to +125
°C
Operation Junction Temperature
Note:
1. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Measured on P.C. Board with 0.2×0.2″(5.0×5.0mm)Copper Pad Areas.
- 199 -
Similar pages