3M AB-5000 Emi absorber Datasheet

AB-5000
EMI Absorber
Data Sheet
Product Description
3Μ™ AB-5000 Series EMI Absorber consists of
flexible soft metal flakes filler in polymer resin
with acrylic pressure-sensitive adhesive.
• Polymer resin and metal flakes filler
• Acrylic pressure-sensitive adhesive
• Supplied on a removable liner for easy
handling and die-cutting
The AB-5000 Series EMI Absorber is available in
standard A4 size and 210mm (width) X 15 meters
(length) in roll.
Applications
The AB-5000 Series EMI Absorber is typically
used for applications requiring electromagneticabsorbing performance. It suppresses radiated
3M AB-5000 EMI Absorber
1.
2.
3.
4.
noise from electrical devices for broadband radio
frequency range.
Common uses include mobile phone (SAR
reduction), computer, digital still camera, RF
block, military equipments for radar avoidance
and stealth performance.
Attenuation and Power Loss
Many factors determine the true attenuation of an
electromagnetic absorbing material, including
shape and thickness, intimacy of substrate contact,
smoothness of application surface, strength and
frequency of the EMI signal, etc. However, using
standard tests and fixtures, it is possible to
determine a value for the signal attenuation.
The typical attenuation range of the 3M AB-5000
Series EMI Absorber depends on thickness.
– Typical Properties
Properties
Typical Value
Type of Backing
Type of Adhesive
Product Number
Thickness 1
Standard packaging
Temperature range
Surface resistivity 2
Thermal conductivity
Tensile strength 3
Attenuation (S11 Reflection
Loss) and Power Loss4
Polymer resin with metal flake filler
Acrylic non-conductive pressure-sensitive adhesive (PSA)
AB-5010
AB-5020
AB-5030
AB-5050
0.10mm
0.20mm
0.30mm
0.50mm
210mm x 297mm
AB-5100
1.00mm
-25 ~ 85℃
1x10 6Ω(min)
0.7 W/mK
6.0MPa(min)
Refer to attenuation and power loss graphs
This value does not contain a double-side adhesive tape thickness. Typical adhesive tape thickness is 50 ㎛ (AB-5010 contains 30 ㎛ adhesive)
Test method : ASTM D257
Test method : JIS K 6251
Attenuation measured by 7mm coaxial verification kit under short fixed condition. Power loss measured by 50Ωmicrostrip line.
Attenuation
--
Power Loss
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to
be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and
determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any
statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained
on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a
period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is
defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal
theory asserted.
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800-626-8381 Fax 800-828-9329
www.3M.com/electrical/emc
Litho in USA
© 3M 2006 78-8131-7504-5-A
Similar pages