AD AD8599ARZ Dual ultralow distortion, ultralow noise op amp Datasheet

Dual Ultralow Distortion,
Ultralow Noise Op Amp
AD8599
Low noise: 1 nV/√Hz at 1kHz
Low distortion: −105 dB THD @ 20 kHz
<80 nV p-p input noise, 0.1 Hz to 10 Hz
Slew rate: 16 V/μs
Wide bandwidth: 10 MHz
Supply current: 4.7 mA/amp typical
Low offset voltage: 10 μV typical
CMRR: 120 dB
Unity-gain stable
±15 V operation
FUNCTIONAL BLOCK DIAGRAM
OUT A 1
–IN A 2
+IN A 3
AD8599
TOP VIEW
–V 4 (Not to Scale)
8
+V
7
OUT B
6
–IN B
5
+IN B
06274-054
FEATURES
Figure 1. 8-Lead SOIC (R-8)
APPLICATIONS
Professional audio preamplifiers
ATE/precision testers
Imaging systems
Medical/physiological measurements
Precision detectors/instruments
Precision data conversion
GENERAL DESCRIPTION
The AD8599 is a dual, very low noise, low distortion operational amplifier ideal for use as a preamplifier. The low noise of
1 nV/√Hz and low harmonic distortion of −105 dB (or better)
at audio bandwidths give the AD8599 the wide dynamic range
necessary for preamps in audio, medical, and instrumentation
applications. The AD8599’s excellent slew rate of 16 V/μs and
10 MHz gain bandwidth make it highly suitable for medical
applications. The low distortion and settling time of the AD8599
make it ideal for buffering of high resolution data converters.
The AD8599 is available in an 8-Lead SOIC package and is
specified over the −40°C to +125°C temperature range.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2007 Analog Devices, Inc. All rights reserved.
AD8599
TABLE OF CONTENTS
Features .............................................................................................. 1
Thermal Resistance .......................................................................4
Applications....................................................................................... 1
Power Sequencing .........................................................................4
Functional Block Diagram .............................................................. 1
ESD Caution...................................................................................4
General Description ......................................................................... 1
Typical Performance Characteristics ..............................................5
Revision History ............................................................................... 2
Outline Dimensions ....................................................................... 14
Specifications..................................................................................... 3
Ordering Guide .......................................................................... 14
Absolute Maximum Ratings............................................................ 4
REVISION HISTORY
2/07—Revision 0: Initial Version
Rev. 0 | Page 2 of 16
AD8599
SPECIFICATIONS
VS = ±15 V, VCM = 0 V, VO = 0 V, TA = +25°C, unless otherwise specified.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
VOS
−40°C ≤ TA ≤ +125°C
Offset Voltage Drift
ΔVOS/ΔT
−40°C ≤ TA ≤ +125°C
Input Bias Current
IB
Input Offset Current
Input Voltage Range
Common-Mode Rejection Ratio
Typ
Max
Unit
10
120
180
μV
μV
−40°C ≤ TA ≤ +125°C
0.8
25
IOS
−40°C ≤ TA ≤ +125°C
25
IVR
CMRR
VDD = ±15 V
−12.5 V ≤ VCM ≤ +12.5 V
−12.5
120
2.2
180
300
180
220
+12.5
μV/°C
nA
nA
nA
nA
V
dB
Large Signal Voltage Gain
AVO
−40°C ≤ TA ≤ 125°C
RL ≥ 600 Ω, VO = −11 V to +11 V
−40°C ≤ TA ≤ +125°C
115
110
106
Input Capacitance
CDIFF
CCM
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Output Source Circuit
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current per Amplifier
VOH
VOL
ISC
ZOUT
PSRR
Min
140
4.8
4.5
RL = 600 Ω
−40°C ≤ TA ≤ +125°C
RL = 2 kΩ
−40°C ≤ TA ≤ +125°C
RL = 600 Ω
−40°C ≤ TA ≤ +125°C
RL = 2 kΩ
−40°C ≤ TA ≤ +125°C
13.1
12.8
13.5
13.2
ISY
13.7
−13.2
−13.5
Settling Time
Gain Bandwidth Product
Phase Margin
NOISE PERFORMANCE
Peak-to-Peak Noise
Voltage Noise Density
SR
ts
GBP
φM
en p-p
en
Current Noise
Total Harmonic Distortion + Noise
THD + N
Channel Separation
CS
120
118
140
4.7
AV = −1, RL = 2 kΩ
AV = 1, RL = 2 kΩ
To 0.01%, step = 10 V
16.8
15
2
10
68
0.1 Hz to 10 Hz
f = 1 kHz
f = 10 Hz
f = 1 kHz
G = 1, RL ≥ 1 kΩ, f = 1 kHz, VRMS = 3 V, ±15 V
G = 1, RL ≥ 1 kΩ, f = 20 kHz, VRMS = 3 V, ±15 V
f = 10 kHz
76
1.07
Rev. 0 | Page 3 of 16
−12.9
−12.8
−13.4
−13.3
±52
5
At 1 MHz, AV = +1
VDD = ±18 V to ±4.5 V
−40°C ≤ TA ≤ +125°C
13.4
−40°C ≤ TA ≤ +125°C
DYNAMIC PERFORMANCE
Slew Rate
dB
dB
dB
pf
pf
116
1.5
−108
−105
−120
5.7
6.75
V
V
V
V
V
V
V
V
mA
Ω
dB
dB
mA
mA
V/μs
V/μs
μs
MHz
Degrees
1.15
1.5
nV
nV/√Hz
nV/√Hz
pA/√Hz
dB
dB
dB
AD8599
ABSOLUTE MAXIMUM RATINGS
THERMAL RESISTANCE
Table 2.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage
Output Short-Circuit to GND
Storage Temperature Range
Operating Temperature Range
Lead Temperature Range (Soldering 60 sec)
Junction Temperature
Rating
±18 V
GND to VDD
±1 V
Indefinite
−65°C to +150°C
−40°C to +125°C
300°C
150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 3. Thermal Resistance
Package Type
8-Lead SOIC (R-8)
θJA
120
θJC
36
Unit
°C/W
POWER SEQUENCING
The op amp supplies must be established simultaneously with,
or before, any input signals are applied.
If this is not possible, the input current must be limited to 10 mA.
ESD CAUTION
Rev. 0 | Page 4 of 16
AD8599
TYPICAL PERFORMANCE CHARACTERISTICS
70
60
MEAN = 8.23
STDEV = 24.47
MIN = –72.62
MAX = 62.09
50
40
30
20
30
20
Figure 2. Input Offset Voltage Distribution VS = ±5 V
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
TCVOS (µV)
2.2 2.4
06274-004
0
06274-001
0
–75 –65 –55 –45 –35 –25 –15 –5 5 15 25 35 45 55 65 75
VOS (µV)
Figure 5. TCVOS Distribution VS = ±5 V, −40°C ≤ TA ≤ +125°C
60
70
MEAN = 7.91
STDEV = 21.89
MIN = –63.02
MAX = 57.5
MEAN = 0.342
STDEV = 0.221
MIN = 0.013
MAX = 1.239
50
NUMBER OF AMPLIFIERS
60
50
40
30
20
40
30
20
0
06274-002
0
–75 –65 –55 –45 –35 –25 –15 –5 5 15 25 35 45 55 65 75
VOS (µV)
Figure 3. Input Offset Voltage Distribution VS = ±15 V
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
TCVOS (µV)
2.2 2.4
Figure 6. TCVOS Distribution VS = ±15 V , −40°C ≤ TA ≤ +85°C
60
60
50
MEAN = 0.461
STDEV = 0.245
MIN = 0.026
MAX = 1.26
50
NUMBER OF AMPLIFIERS
40
VS = ±15V
30
20
10
0
40
30
20
10
–10
–25
0
25
50
75
TEMPERATURE (°C)
100
125
150
0
06274-003
–20
–50
0
06274-005
10
10
Figure 4. Input Offset Voltage vs. Temperature
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
TCVOS (µV)
2.2 2.4
Figure 7. TCVOS Distribution VS = ±5 V, −40°C ≤ TA ≤ +85°C
Rev. 0 | Page 5 of 16
06274-006
NUMBER OF AMPLIFIERS
40
10
10
VOS (µV)
MEAN = 0.346
STDEV = 0.218
MIN = 0.010
MAX = 1.155
50
NUMBER OF AMPLIFIERS
NUMBER OF AMPLIFIERS
60
AD8599
100
45
MEAN = 0.765
STDEV = 0.234
MIN = 0.338
MAX = 1.709
35
75
50
30
25
VOS (µV)
25
20
–25
15
–50
10
–75
5
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
TCVOS (µV)
–100
–15
06274-007
0
0
2.2 2.4
Figure 8. TCVOS Distribution, VS = ±15 V, −40°C ≤ TA ≤ +125°C
–10
–5
0
VCM (V)
5
10
15
06274-010
NUMBER OF AMPLIFIERS
40
Figure 11. Offset Voltage vs. VCM, VS = ±15 V
0
350
300
–5
250
200
150
IB (nA)
VOS (µV)
–10
–15
VS = ±15V
100
50
0
–20
VS = ±5V
–50
–25
–100
–30
–200
–50
1
2
3
TIME (Minute)
4
5
Figure 9. Offset Voltage vs. Time
–25
0
25
50
TEMPERATURE (°C)
75
100
125
06274-011
0
06274-008
–150
Figure 12. Input Bias Current vs. Temperature VS = ±5 V, VCM = 0 V
100
350
300
75
250
50
200
150
IB (nA)
VOS (µV)
25
0
–25
100
50
0
–50
–50
–100
–75
–2.5
0
2.5
VCM (V)
5.0
–200
–50
–25
0
25
50
TEMPERATURE (°C)
75
100
125
06274-012
–150
06274-009
–100
–5.0
Figure 13. Input Bias Current vs. Temperature VS = ±15 V, VCM = 0 V
Figure 10. Offset Voltage vs. VCM, VS = ±5 V
Rev. 0 | Page 6 of 16
AD8599
120
80
70
118
RL = 2kΩ, VO = ±11V
60
AVO (dB)
IOS (nA)
50
40
IOS @ VS = ±5V
30
116
RL = 600Ω, VO = ±11V
114
20
IOS @ VS = ±15V
112
–25
0
75
25
50
TEMPERATURE (°C)
100
125
110
–50
06274-013
Figure 14. Input Offset Current vs. Temperature
–25
0
TA = –40°C
250
150
60
ISINK
200
OUTPUT CURRENT (mA)
150
100
TA = +25°C
50
0
TA = +85°C
–50
–100
–150
TA = +125°C
–200
–250
40
20
0
–20
–40
ISOURCE
–60
–300
–8
–6
–4
–2
0
2
VCM (V)
4
6
8
10
12
–80
–50
06274-014
–350
–12 –10
Figure 15. Input Bias Current vs. VCM, VS = ±15 V
112
60
OUTPUT CURRENT (mA)
80
RL = 2kΩ, VO = ±2V
108
RL = 600Ω, VO = ±2V
106
0
25
50
75
TEMPERATURE (°C)
100
125
150
Figure 18. Output Current vs. Temperature, VS = ±5 V
114
110
–25
06274-017
IB (nA)
125
80
300
104
102
ISINK
40
20
0
–20
–40
ISOURCE
–60
–25
0
75
25
50
TEMPERATURE (°C)
100
125
150
–80
–50
06274-015
AVO (dB)
100
Figure 17. Large Signal Voltage Gain vs. Temperature, VS = ±15 V
350
100
–50
75
25
50
TEMPERATURE (°C)
Figure 16. Large Signal Voltage Gain vs. Temperature VS = ±5 V
–25
0
25
50
75
TEMPERATURE (°C)
100
125
Figure 19. Output Current vs. Temperature, VS = ±15 V
Rev. 0 | Page 7 of 16
150
06274-018
0
–50
06274-016
10
AD8599
14
10000
10
ISY = –40°C
6
4
0
4
8
12
16
20
24
VSY (V)
28
36
32
40
100
0.001
OUTPUT SATURATION VOLTAGE (mV)
ISY (mA)
1
100
10
10000
12.5
10.0
ISY ±15V
ISY ±5V
–25
0
25
50
TEMPERATURE (°C)
75
100
125
VDD – VOH
1000
100
100
06274-020
7.5
Figure 21. Supply Current vs. Temperature
1000
10000
OUTPUT LOAD (Ω)
100000
1000000
Figure 24. Output Saturation Voltage vs. RL, VS = ±5 V
10000
OUTPUT SATURATION VOLTAGE (mV)
10000
ISINK
1000
ISOURCE
0.01
0.1
1
10
100
IL (mA)
VEE – VOL
1000
100
100
06274-021
OUTPUT SATURATION VOLTAGE (mV)
0.1
Figure 23. Output Saturation Voltage vs. Current Load, VS = ±15 V
15.0
100
0.001
0.01
IL (mA)
Figure 20. Supply Current vs. Supply Voltage
5.0
–50
ISOURCE
06274-023
0
06274-019
2
ISINK
1000
Figure 22. Output Saturation Voltage vs. Current Load, VS = ±5 V
1000
10000
OUTPUT LOAD (Ω)
100000
1000000
Figure 25. Output Saturation Voltage vs. RL, VS = ±5 V
Rev. 0 | Page 8 of 16
06274-024
ISY (mA)
ISY = +25°C
8
06274-022
ISY = +85°C
ISY = +125°C
OUTPUT SATURATION VOLTAGE (mV)
12
AD8599
0
VEE – VOL (V)
–0.5
VDD – VOH
1000
–1.0
VEE – VOL @ RL = 2kΩ
–1.5
1000
10000
OUTPUT LOAD (Ω)
100000
1000000
–2.5
–50
–25
0
25
50
75
TEMPERATURE (°C)
100
125
06274-028
100
100
150
Figure 29. Output Saturation Voltage vs. Temperature, VS = ±5 V
Figure 26. Output Saturation Voltage vs. RL, VS = ±15 V
2.5
10000
2.0
VCC – VOH (V)
VCC – VOH @ RL = 600Ω
VEE – VOL
1000
VCC – VOH @ RL = 2kΩ
1.0
10000
OUTPUT LOAD (Ω)
100000
1000000
0
–50
0
2.0
–0.5
VEE – VOL (V)
2.5
VCC – VOH @ RL = 600Ω
1.0
VCC – VOH @ RL = 2kΩ
0.5
–25
0
75
25
50
TEMPERATURE (°C)
100
125
25
50
75
TEMPERATURE (°C)
100
125
150
–1.0
VEE – VOL @ RL = 2kΩ
–1.5
VEE – VOL @ RL = 600Ω
–2.0
150
–2.5
–50
06274-027
0
–50
0
Figure 30. Output Saturation Voltage vs. Temperature, VS = ±15 V
Figure 27. Output Saturation Voltage vs. RL, VS = ±15 V
1.5
–25
06274-029
1000
Figure 28. Output Saturation Voltage vs. Temperature, VS = ±5 V
–25
0
75
25
50
TEMPERATURE (°C)
100
125
150
Figure 31. Output Saturation Voltage vs. Temperature, VS = ±15 V
Rev. 0 | Page 9 of 16
06274-030
100
100
VCC – VOH (V)
1.5
0.5
06274-026
OUTPUT SATURATION VOLTAGE (mV)
VEE – VOL @ RL = 600Ω
–2.0
06274-025
OUTPUT SATURATION VOLTAGE (mV)
10000
AD8599
15.0
120
14.8
100
120
100
PHASE (Degrees)
14.6
80
80
60
60
GAIN (dB)
VOH (V)
14.2
14.0
VOH @ RL = 2kΩ
13.8
40
40
GAIN (dB)
20
20
0
0
PHASE (Degrees)
14.4
13.6
VOH @ RL = 600Ω
–20
13.2
0
100
50
TEMPERATURE (°C)
150
–40
1k
06274-031
13.0
–50
–20
Figure 32. Output Voltage High vs. Temperature, VS = ±15 V
10k
100k
1M
FREQUENCY (Hz)
10M
–40
100M
06274-034
13.4
Figure 35. Gain and Phase vs. Frequency, ±5 V ≤ VS ≤ ±15 V
50
–13.0
VOL @ RL = 600Ω
40
GAIN = 100
30
CLOSED-LOOP GAIN (dB)
–13.5
VOL (V)
VOL @ RL = 2kΩ
–14.0
–14.5
GAIN = 10
20
10
GAIN = 1
0
–10
–20
–30
50
TEMPERATURE (°C)
100
150
–50
1k
06274-032
0
Figure 33. Output Voltage Low vs. Temperature, VS = ±15 V
100k
1M
FREQUENCY (Hz)
10M
100M
Figure 36. Closed-Loop Gain vs. Frequency, ±5 V ≤ VS ≤ ±15 V
70
30
VS = ±15V
25
60
GAIN = 100
50
ZOUT (Ω)
20
15
10
5
GAIN = 10
30
GAIN = 1
10
1
10
100
1000
FREQUENCY (kHz)
Figure 34. Maximum Output Swing vs. Frequency
10000
0
1k
10k
100k
1M
FREQUENCY (Hz)
10M
100M
06274-036
0
40
20
VS = ±5V
06274-033
MAXIMUM OUTPUT SWING (V p-p)
10k
06274-035
–40
–15.0
–50
Figure 37. Closed-Loop Output Impedance vs. Frequency, ±5 V ≤ VS ≤ ±15 V
Rev. 0 | Page 10 of 16
AD8599
600
140
CMRR –V S = ±5V (dB)
CMRR –V S = ±15V (dB)
80
60
40
300
200
100
1k
10k
100k
FREQUENCY (Hz)
1M
10M
100M
0
06274-037
0
10
0.98
1.01
1.04
1.07
1.10
1.13
1.16
1.19
VOLTAGE NOISE DENSITY (nV/ Hz)
Figure 38. Common-Mode Rejection Ratio vs. Frequency
Figure 41. Voltage Noise Density @ 1 kHz, ±5 V ≤ VS ≤ ±15 V
100
120
PSRR+ (dB)
PSRR– (dB)
80
60
40
20
0
1k
10k
100k
FREQUENCY (Hz)
1M
10M
1
0.1
06274-038
–20
100
10
Figure 39. Power Supply Rejection Ratio vs. Frequency, ±5 V ≤ VS ≤ ±15 V
1
10
100
FREQUENCY (Hz)
06274-041
VOLTAGE NOISE DENSITY (nV/ Hz)
100
1000
Figure 42. Voltage Noise Density vs. Frequency, ±5 V ≤ VS ≤ ±15 V
90
100
70
CURRTENT NOISE DENSITY (pA/ Hz)
MEAN = 1.30
STDEV = 0.09
MIN = 1.1
MAX = 1.5
80
60
50
40
30
20
1.0
1.1
1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9
VOLTAGE NOISE DENSITY (nV/ Hz)
2.0
10
1
0.1
06274-039
10
0
0.95
06274-040
100
20
PSRR (dB)
400
Figure 40. Voltage Noise Density @ 10 Hz, ±5 V ≤ VS ≤ ±15 V
1
10
100
FREQUENCY (Hz)
1000
Figure 43. Current Noise Density vs. Frequency, ±5 V ≤ VS ≤ ±15 V
Rev. 0 | Page 11 of 16
06274-042
CMRR (dB)
100
NUMBER OF AMPLIFIERS
MEAN = 1.07
STDEV = 0.02
MIN = 1.05
MAX = 1.15
500
NUMBER OF AMPLIFIERS
120
AD8599
0.1
20
15
10
0.001
RL = 600Ω
5
0
VS = +15V
VIN = 20V p-p
AV = 1
RF = 1kΩ
RL = 2kΩ
VERTICAL AXIS = 5V/DIV
HORIZONTAL AXIS = 4µs/DIV
–5
–10
RL = 2kΩ
100
1000
FREQUENCY (Hz)
10000
100000
–20
–8.6
06274-043
0.0001
10
–15
–4.6
Figure 44. Total Harmonic Distortion + Noise vs. Frequency, VS = ±15 V,
VIN = 3 V rms
–0.6
3.4
7.4
11.4 15.4
TIME (µs)
19.4
23.4
27.4
31.4
06274-047
THD + N (%)
AMPLITUDE (V)
0.01
Figure 47. Large Signal Response
0.1
20
VIN = 3V rms
VIN = 5V rms
VIN = 7V rms
VS = ±15V
VIN = 20V p-p
AV = –1
RF = 2kΩ
RS = 2kΩ
CL = 0pF
VERTICAL AXIS = 5V/DIV
HORIZONTAL AXIS = 4µs/DIV
15
10
THD + N (%)
AMPLITUDE (V)
0.01
0.001
5
0
–5
–10
100
1000
FREQUENCY (Hz)
10000
100000
–20
–8.6
06274-044
0.0001
10
Figure 45. Total Harmonic Distortion + Noise vs. Frequency
45
60
40
3.4
7.4
11.4 15.4
TIME (µs)
19.4
23.4
27.4
31.4
35
OVERSHOOT (%)
40
20
0
VS = +15V, +5V
VIN = 100mV p-p
AV = 1
EXTERNAL CL = 100pF
EXTERNAL RL = 10kΩ
VERTICAL AXIS = 20mV/DIV
HORIZONTAL AXIS = 400ns/DIV
–40
–60
0
400
800
1200 1600 2000 2400 2800 3200
TIME (ns)
Figure 46. Small Signal Response
30
25
20
15
10
5
0
10
100
CAPACITANCE (pF)
1000
06274-049
–20
06274-046
AMPLITUDE (mV)
–0.6
Figure 48. Large Signal Response
80
–80
–800 –400
–4.6
06274-048
–15
Figure 49. Overshoot vs. Capacitance, ±5 V ≤ VS ≤ ±15 V, AV = 1, RL = 10 kΩ
Rev. 0 | Page 12 of 16
AD8599
0
800
VIN = 10V p-p
VIN = 20V p-p
600
400
–60
–80
–100
200
0
–200
–120
–400
–140
–600
–160
100
1000
10000
FREQUENCY (Hz)
100000
1000000
Figure 50. Channel Separation vs. Frequency, VS = ±15 V, AV = 100, RL = 1 kΩ
Rev. 0 | Page 13 of 16
–800
0
1
2
3
4
5
6
TIME (Seconds)
7
8
9
10
Figure 51.Peak-to-Peak Noise, VS ≤ ±15 V, AV = 1 M, RL = 10 kΩ
06274-053
AMPLITUDE (mV)
–40
06274-050
CHANNEL SEPARATION (dB)
–20
AD8599
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
8
1
5
4
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0040)
COPLANARITY
0.10
SEATING
PLANE
6.20 (0.2440)
5.80 (0.2284)
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
0.31 (0.0122)
0.50 (0.0196)
0.25 (0.0099)
45°
8°
0°
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012-A A
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
060506-A
4.00 (0.1574)
3.80 (0.1497)
Figure 52. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
ORDERING GUIDE
Model
AD8599ARZ 1
AD8599ARZ-REEL1
AD8599ARZ-REEL71
1
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
8-Lead Standard Small Outline Package [SOIC_N]
8-Lead Standard Small Outline Package [SOIC_N]
8-Lead Standard Small Outline Package [SOIC_N]
Z = Pb-free part.
Rev. 0 | Page 14 of 16
Package Option
R-8
R-8
R-8
AD8599
NOTES
Rev. 0 | Page 15 of 16
AD8599
NOTES
©2007 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D06274-0-2/07(0)
Rev. 0 | Page 16 of 16
Similar pages