DC-DC Converter SIP-Package DAE-2 SERIES, 2WATT, 1KVDC, UNREGULATED FEATURES: 3 years warranty 1000Vdc isolation voltage Single, dual, isolated twin output models Operating temperature range -40°C to +85°C Model Input voltage (Vdc) Output voltage (Vdc) Output current (mA) Min. Max. Efficiency Typ. DAE2-0511 5 40 400 80% DAE2-0512 9 22 220 80% DAE2-0513 12 16.6 166 80% DAE2-0514 15 13.6 136 80% DAE2-0515 24 8.4 84 80% DAE2-0521 ±5 20 200 80% DAE2-0522 ±9 11 110 80% ±12 8 80 80% DAE2-0524 ±15 6.8 68 80% DAE2-0525 ±24 4.2 42 80% DAE2-0501 5, 5 20 200 80% DAE2-0502 9, 9 11 110 80% DAE2-0503 12, 12 8 80 80% DAE2-0504 15, 15 6.8 68 80% DAE2-0505 24, 24 4.2 42 80% DAE2-1211 5 40 400 80% DAE2-1212 9 22 220 80% DAE2-1213 12 16.6 166 80% DAE2-1214 15 13.6 136 80% DAE2-1215 24 8.4 84 80% DAE2-1221 ±5 20 200 80% ±9 11 110 80% DAE2-1223 ±12 8 80 80% DAE2-1224 ±15 6.8 68 80% DAE2-1225 ±24 4.2 42 80% DAE2-1201 5, 5 20 200 80% DAE2-1202 9, 9 11 110 80% DAE2-1203 12, 12 8 80 80% DAE2-0523 DAE2-1222 www.pairuigroup.com 5(4.5~5.5) 12(10.8~13.2) Page: 1/5 Date: 12/13/2013 DC-DC Converter SIP-Package DAE-2 SERIES, 2WATT, 1KVDC, UNREGULATED Model Input voltage (Vdc) Output voltage (Vdc) Output Current (mA) Efficiency Typ. Min. Max. 15, 15 6.8 68 80% 24, 24 4.2 42 80% DAE2-2411 5 40 400 80% DAE2-2412 9 22 220 80% DAE2-2413 12 16.6 166 80% DAE2-2414 15 13.6 136 80% DAE2-2415 24 8.4 84 80% DAE2-2421 ±5 20 200 80% DAE2-2422 ±9 11 110 80% ±12 8 80 80% DAE2-2424 ±15 6.8 68 80% DAE2-2425 ±24 4.2 42 80% DAE2-2401 5, 5 20 200 80% DAE2-2402 9, 9 11 110 80% DAE2-2403 12, 12 8 80 80% DAE2-2404 15, 15 6.8 68 80% DAE2-2405 24, 24 4.2 42 80% DAE2-1204 DAE2-1205 DAE2-2423 12(10.8~13.2) 24(21.6~26.4) Notes: other input and output models may available on request. ELECTRICAL Line regulation --- ±1.2% Load regulation 10% ~ 100% full load Ripple and noise --- 100mVp-p max. Isolation voltage --- 1000Vdc Operating temperature range --- -40°C to +85°C MTBF --- 3.5x106Hrs ±15% max. Notes: All the data in this article are under test with “TA+25°C, humidity<75%, rated input and rated load” mode. www.pairuigroup.com Page: 2/5 Date: 12/13/2013 DC-DC Converter SIP-Package DAE-2 SERIES, 2WATT, 1KVDC, UNREGULATED MECHANICAL Single output CONNECTION ISOLATE PIN # SINGLE DUAL 1 +Vin +Vin +Vin 2 GND GND GND 4 -Vo -Vo -Vo1 5 No Pin COM +Vo1 6 +Vo +Vo -Vo2 7 No Pin No Pin +Vo2 D TWIN Note: Dual output * Unit is mm(inch). Isolated twin output www.pairuigroup.com Page: 3/5 Date: 12/13/2013 DC-DC Converter SIP-Package DAE-2 SERIES, 2WATT, 1KVDC, UNREGULATED TEMPERATURE PROFILE CAPACITIVE LOADS SELECTION Single Output Cin (Vdc) (μF) 5 4.7 5 10 ±5 4.7 12 2.2 9 4.7 ±9 2.2 24 1 12 2.2 ±12 1 - - 15/24 1 ±15 0.47 www.pairuigroup.com Voltage Cout Dual Output Vin (μF) (Vdc) Page: 4/5 Voltage (Vdc) Cout (μF) Date: 12/13/2013 DC-DC Converter SIP-Package DAE-2 SERIES, 2WATT, 1KVDC, UNREGULATED NOTES RECOMMENDED TEST AND APPLICATION CIRCUIT In order to ensure the efficiency and dependability of the module, the minimum specified load must be less than 10% of rated load. If the output power is low, we recommend to add an external 10% loading resistor in parallel. FUSE: depends on the actual input current; TVS: depends on the actual input voltage; Recommended capacitor:C1, C2, C5, C8 ,about 0.1uF; for C6,C7,C9, please check the capacitive load; C3,C4:2KV/1nF. www.pairuigroup.com Page: 5/5 Date: 12/13/2013