Description: LFO-14-ip - optical module on the base of uncooled 1310 nm MQW InGaAsP/InP Fabry-Perot laser diode, coupled with singlemode optical fiber. Hermetically sealed modules are performed in standard package with built-in monitor photodiode and collimator microlens. Modules operate in wide temperature range, have stable output power and lifetime more than 5*106 hours. LFO-14-ip - the best source for analog and digital (up to 622 Mb/s) telecommunication lines, optical testers and other metrology devices, local optical networks and many other applications. Absolute maximum ratings: Laser diode Max. output power (mW) 1.5 Reverse voltage (V) 2.0 Monitor photodiode Reverse voltage (V) 10 Forward current (mA) 1.0 Environment Operating temperature range (оС) о Storage temperature range ( С) -30..+60 -40..+75 Assembly Pin soldering temperature (оС) 200 Pin soldering time (sec) 5.0 Optical and electrical characteristics (Т=25оС): Characteristics Symbol Test condition Rating Units Laser diode Output power from fiber end POP IOP 1.0 mW Wavelength λOP POP 1.280..1.340 µm Spectral width FWHM Δλ POP <5.0 nm Threshold current ITH CW <15 mA Forward current IF POP <40 mA Forward voltage Rise time/fall time UOP POP <1.6 V τR/τF POP <0.5 ns IPD UREV=5.0 V, POP >100 µA Monitor photodiode Monitor current Dark current ID UREV=5.0 V <0.1 µA Capacitance CPD UREV=5.0 V, f=1 MHz <15 pF DC/DCL 9/125 µm L 400..1500 mm Optical fiber Fiber core/cladding diameter Fiber length Optical connector type 09.08.2010 «FC» or «ST» lfo_14_ip.doc 1 of 1