ITT GS02MCBE Sealed ultraminiature slide switch Datasheet

C&K GS Series
Sealed Ultraminiature Slide Switches
Features/Benefits
• Ultraminiature design saves PCB space
• Sealed construction, process compatible
with most PCB wash processes
• Available in thru-hole and surface mount
• Long life contact design
• RoHS compliant
Slide
J
Typical Applications
• Computer peripherals &
network products
• Test & measurement equipment
• Telephone & cable modems
Specifications
Materials
CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max.
MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break
cycles at full load.
CONTACT RESISTANCE: Below 50 m Ω typ. initial @
2–4 V DC, 100 mA.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 500 Vrms min. @ sea level.
STORAGE & OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
PACKAGING: Switches available in embossed anti-static tape
and reels per EIA 481A. Some models available on embossed
anti-static tape and reels per EIA 481-3, consult Customer
Service Center.
HOUSING & BASE: Glass filled 6/6 or 4/6, flame retardant, heat
stabilized (UL 94V-0).
ACTUATOR: Polyetherimide PEI (UL 94V-0), with standard
internal seal.
SWITCH SUPPORT: Brass, matte-tin plated.
MOVABLE CONTACT: Copper with gold plate over nickel plate.
STATIONARY CONTACTS: Copper alloy, with gold plate over
nickel plate.
TERMINALS: Copper alloy, with gold plate over nickel plate.
TERMINAL SEAL: Epoxy. All terminals insert molded.
NOTE: All models are RoHS compliant and compatible with all options. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
How To Order
Complete part numbers for GS Series Sealed Ultraminiature Slide Switches are shown below and on page J–17.
C & K MARKING ON
OPPOSITE SIDE
SWITCH FUNCTION
POS.1
POS. 2
PART NUMBER
SCHEMATIC
GS01MCBE
ON
ON
Conn. Terms.
2-1
2-3
GS02MCBE
OFF
ON
OPEN
3-1
GS04MCBE
ON
OFF
Conn. Terms.
1-3
OPEN
Conn. Terms.
TOTAL
TRAVEL
Actuator Shown
In Pos. 1
SPDT
PC MOUNTING
Actuator Shown
In Pos. 1
SPST
SPST
GS02-omit center hole.
GS02 Model
GS01MCBE
SPDT
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–16
www.ittcannon.com
C&K GS Series
Sealed Ultraminiature Slide Switches
SWITCH FUNCTION
POS.1
POS. 2
TOTAL
TRAVEL
PART NUMBER
SCHEMATIC
ON
ON
Conn. Terms.
2-1
2-3
GS02MABE
OFF
ON
OPEN
3-1
GS04MABE
ON
OFF
Conn. Terms.
1-3
OPEN
Actuator Shown
PC MOUNTING
Conn. Terms.
GS01MABE
Horizontal Actuation
GS02 Model
SPDT
SPST
SPST
SPDT
SWITCH FUNCTION
TOTAL
TRAVEL
POS.1
POS. 2
PART NUMBER
SCHEMATIC
GS01MSABE
ON
ON
Conn. Terms.
2-1
2-3
GS02MSABE
OFF
ON
OPEN
3-1
GS04MSABE
ON
OFF
Conn. Terms.
1-3
OPEN
GS02 Model
Actuator Shown
In Pos. 1
PC MOUNTING
SMT
Conn. Terms.
GS01MSABE
Horizontal Actuation
SPDT
SPST
SPST
SPDT
TAPE & REEL
FOR PART NUMBERS GS01MSABE, GS02MSABE, GS04MSABE
REEL INFORMATION
OUTSIDE DIAMETER
PILOT HOLE
QUANTITY PER REEL
13.00 (330,0)
.512 (13,0)
600
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
J–17
www.ittcannon.com
J
Slide
GS01MABE
Similar pages