16V Series Resettable Fuse PTC Features Radial leaded devices. Over-current protection High voltage surge capabilities Flame retardant epoxy polymer insulating material meets UL94 V-0 requirement. Available in lead-free version. Meets MSL level 1, per J-STD-020 Dimensions(Unit:mm) Model A(max) B(max) C(max) D(max) JK16300 9.0 12.0 3.0 5.1 JK16400 10.0 13.0 3.0 5.1 JK16500 10.7 15.0 3.0 5.1 JK16600 13.5 15.0 3.0 5.1 JK16700 13.5 18.0 3.0 5.1 JK16800 13.5 18.0 3.0 5.1 JK16900 15.0 23.0 3.0 5.1 JK161000 18.0 24.0 3.0 5.1 JK161100 18.0 24.0 3.0 5.1 JK161200 22.5 25.0 3.0 10.2 JK161300 24.0 28.0 3.0 10.2 JK161400 24.0 28.0 3.0 10.2 1 HUAAN LIMITED www.huaandz.com 16V Series Electrical characteristics(25℃) lhold Part Number JK16300 JK16400 JK16500 JK16600 JK16700 JK16800 JK16900 JK161000 JK161100 JK161200 JK161300 JK161400 (A) 3 4 5 6 7 8 9 10 11 12 13 14 ltrip Vmax lmax Pd (A) 6 8 10 12 14 16 18 20 22 24 26 28 OP (Vdc) 16 16 16 16 16 16 16 16 16 16 16 16 (A) 100 100 100 100 100 100 100 100 100 100 100 100 (W) 2.3 2.4 2.6 2.8 3.0 3.0 3.3 3.7 3.7 4.2 4.2 4.2 Maximum Resistance Time To Trip Current Time Rmin Rmax R1max (A) (S) (Ω) (Ω) (Ω) 9 15 20 60 80 12 15 20 40 60 15 15 14 25 33 18 15 10 21 31 21 15 8 15 20 24 15 6 13 18 27 25 4 12 16 30 30 4 11 15 33 3 9 13 30 36 30 3 8 12 39 50 3 8 12 40 50 3 7 11 ·IH = Hold current: maximum current device will pass without tripping in 25℃ still air. ·IT = Trip current: minimum current at which the device will trip in 25℃ still air. ·VMAXi = Maximum interrupt voltage device can withstand without damage at rated current. ·IMAX = Maximum fault current device can withstand without damage at rated voltage. ·RMAX = Maximum resistance of device in initial (un-soldered) state. ·RMIN = Minimum resistance of device in initial (un-soldered) state. Operating temperature: -40℃ ~+85℃ Packing quantity:500PCS [email protected] Specifications are subject to change without notice 2 HUAAN LIMITED www.huaandz.com Tel:+86-755-27465585