PRODUCT DATASHEET ET-8AI2-4AO2 PRODUCT DATASHEET PRODUCT DATASHEET PRODUCT DATASHEET ET-16DI2 EtherTRAK® Ethernet I/O Module TM ET-16DI2 ET-16DI2 ET-16DI2 EtherTRAK ANALOG Sixnet Automation SeriesINPUTS AND OUTPUTS Select the ET-8AI2-4AO2 when you need a mix of 4-20 mA analog inputs and outputs at TM EtherTRAK DISCRETE INPUTS TMTM EtherTRAK DISCRETE INPUTS EtherTRAK DISCRETE INPUTS the same location. PRODUCT DATASHEET Ethernet I/O Module – Discrete Inputs Select the ET-16DI2 when you need discrete (on/off) inputs reported over an Ethernet Network Select ET-16DI2 when you need discrete (on/off) inputs reported over Ethernet Network Select thethe ET-16DI2 when you need discrete (on/off) inputs reported over anan Ethernet Network ET-8AI2-4AO2 PRODUCT HIGHLIGHTS PRODUCT HIGHLIGHTS PRODUCT HIGHLIGHTS PRODUCT HIGHLIGHTS Single compact solution for small stations Supports DC sinking/sourcing AC wiring Supports sinking/sourcing or AC wiring Supports DCDC sinking/sourcing ororAC wiring TMsmall Lowest cost for analog applications User-confi gurable smart fi ltering User-confi gurable smart filtering User-confi gurable smart filtering Input/output combination is contact ideal forbounce control Select the ET-8AI2-4AO2 when you need a Pulse counters with filtering Pulse counters with contact bounce filtering Pulse counters with contact bounce filtering Ethernet or RS485 Modbus capability the same location. One high-speed counter channel One high-speed counter channel 2KHz KHz One high-speed counter channel toto2to2KHz EtherTRAK ANALOG INPUTS AND OUTPUTS mix of 4-20 mA analog inputs and outputs at PERFORMANCE SPECIFICATIONS PERFORMANCE SPECIFICATIONS PERFORMANCE SPECIFICATIONS PERFORMANCE SPECIFICATIONS PRODUCT HIGHLIGHTS 8 analog inputs 16 input channels 16 input channels 16 input channels Single compact solution for small stations Analog input range 4-20 mA 12/24 Nominal input voltage 12/24 VDC/VAC Nominal voltage 12/24 VDC/VAC Nominal input voltage VDC/VAC Lowest cost for small analog applications 1 1 1 Guaranteed voltage 9 VDC/VAC Analog input resolution 14 bits (0.01%) Guaranteed Guaranteed ON voltage 99VDC/VAC ONON voltage VDC/VAC Input/output combination is ideal for control Maximum input voltage 30 Maximum input voltage 30 VDC/VAC AnalogMaximum input characteristics Same asVDC/VAC ET-16AI2 input voltage 30 VDC/VAC 2 Ethernet RS485 Modbus capability 22 or Guaranteed OFF voltage 5.0 VDC Guaranteed Guaranteed voltage 5.0 VDC OFF voltage 5.0 VDC 4 of analog outputs OFF 2 2 Guaranteed OFF current mA PERFORMANCE SPECIFICATIONS 21.41.4 Guaranteed OFF current Guaranteed OFF current 1.4mA mA Output range 4-20 mA inputs Input resistance 3.6K Ohms 8 analog Input resistance 3.6K Ohms Input resistance 3.6K Ohms 16 bits D/A resolution (less than 1μA) Nominal input current @ 24VDC 6.7 mA Nominal input current 6.7 Analog input range 4-20 mA @ Nominal input current @24VDC 24VDC 6.7mA mA Full scale accuracy (@20°C) +/0.02% Filtered Mode ON/OFF delay (note 3) 25mS Filtered Mode ON/OFF (note 3)3)25mS Analog Filtered input resolution 14 bits delay (0.01%) Mode ON/OFF delay (note 25mS Span and offsetMode temp. coef cient +/50 ppm per °C typical Filtered Mode count feature 10 Hz maximum Filtered count feature 10 Hz maximum Filtered Analog Mode count feature 10ET-16AI2 Hz maximum input characteristics Same as Max.output Fast settling time (tofeature 0.05%) 5 mS Mode count Hz (2 KHz channel Fast Mode count feature 100100 Hz (2 KHz on on channel 1) 1) Fast outputs Mode count feature 100 Hz (2 KHz4 on channel 1) 4 of analog 4 Fastest scan rate channels) 2 mS Required user supplied voltage 10-30 VDC Fastest scan rate (16(16 channels) 2 mS Fastest scanmA rate (16 channels) 2 mS4 Output range 4-20 Required supply voltage 10-30 VDC (0.75 watt typical) Loadresistance Required supply voltage 10-30 VDC (0.75 watt typical) range (@ +24 VDC supply) 0-750 Ohms Required supply voltage 10-30 VDC (0.75 watt typical) 16 bits D/A resolution (less than 1μA) Operating temperature range -30 to 70° C Operating temperature -30 to 70° C Short circuit protection currentrange limiting Operating temperature range -30 to 70° C Storage Full scale temperature range -40 to 85° C accuracy (@20°C)range +/0.02% Storage temperature -40 Fastest scan rate (all channels) 5 mS to 85° C Storage temperature range -40 to 85° C Humidity (non-condensing) 5 95% toppm 95%per °C typical Spanand Humidity (non-condensing) 5 to offset temp. coefcient +/50 Required supply (non-condensing) voltage 10-30 VDC5 (0.75 watt typical) Humidity to 95% RS485 PORT FOR I/O EXPANSION PORT FOR EXPANSION RS485 Max. output settling timeI/O (to 0.05%) 5 mS RS485 Operating temperature range -30 to 70° C PORT I/O EXPANSION 32 toFOR 512 Max. RS485 stations 32user (up(up to 512 I/O)I/O) Max. RS485 stations Required supplied voltage 10-30 VDC Storage temperature range -40 toWindows” 85° Cstations 32 (up to 512 I/O) Max. RS485 Protocol Sixnet “I/O for Protocol Sixnet for Windows” Load resistance range “I/O (@ +24 VDC supply) 0-750 Ohms Humidity (non-condensing) 5and toWindows” 95% Protocol Sixnet “I/Oand for and Modbus ASCII RTU and Modbus ASCII RTU Short circuit protection current limiting and RS485 PORT FOR I/O EXPANSION Modbus ASCII and RTU Baud rate 38,400 bps Baud rate 38,400 bps scan ratestation (all channels) 5 mS Fastest 32 Max. RS485 (up to 512 I/O) distance Baud 38,400 bps to 0.5 mile recommended UpUp to rate 0.5 mile recommended distance Required supply voltage 10-30 VDC (0.75 watt typical) Baud rate: 38,400 bps Up Isolation (from Ethernet port) 1200 Volts RMS 1 minute to 0.5(from mile recommended distance Isolation Ethernet port) 1200 Volts RMS 1 minute Operating Recommended distance of up to 0.5 mileC temperature range -30 to 70° Notes: Notes: Isolation (from Ethernet port) 1200 Volts RMS 1 minute 1 1 Minimum voltage guaranteed toModbus turn module Minimum voltage guaranteed to turn thethe module ON. Storage Protocol: SIXNET “I/O for Windows”, ASCII &ON. RTU 2 temperature range -40 to 85° C Notes: 2 The maximum input current/voltage switch input from The maximum input current/voltage thatthat willwill notnot switch thethe input from 1 Isolation (from Ethernet port) 1200 Volts RMS 1 minute Minimum voltage guaranteed to turn the module ON. OFF to ON. OFF to ON. Humidity (non-condensing) 5 to 95% 2 3 The maximum input current/voltage that will not switch the input from 3 3.6K Smart logic ignores transients, power dropouts switch contact Smart logic ignores transients, power lineline dropouts andand switch contact OFF to ON. I/O EXPANSION bounce. RS485 PORT FOR bounce. 3 ORDERING 4 INFORMATION Smart logic ignores transients, power lineexternal dropouts and switch contact 4 I/O register update time does not include external communications. I/O register update time does not include communications. 32 Max. RS485 station (up to 512 I/O) bounce. 8AI and 4AO with wiring base ET-8AI2-4AO2-H 4 ORDERING INFORMATION Baud rate: 38,400update bps ORDERING INFORMATION I/O register time does not include external communications. ET-8AI2-4AO2-M Replacement module only Recommended distance ofinputs up to 0.5 mile ET-16DI2-H 16 with wiring base ET-16DI2-H 16 inputs with wiring base ORDERING INFORMATION SIXNET for Windows”, Modbus ASCII ET-16DI2-M Replacement module only All speciProtocol: cations are subject to “I/O change. Consult factory for latest info. & RTU ET-16DI2-M Replacement module ET-16DI2-H 16 inputs with wiringonly base Isolation (from Ethernet port) 1200 Volts RMS 1 minute AllET-16DI2-M specifi cations are subject to change. Consult factory latest All specifi cations are subject to change. factory for latest info. Replacement module only • 331 • Consult •info. Sixnet Technology Park Ushers Road Ballston Lake, NYfor 12019 USA 3.6K Datasheet ET-8AI2-4AO2 May 20, 2009 • Fax • [email protected] 1.518.877.5173 1.518.877.8346 • 331 • Ballston Sixnet Technology Park Ushers Road Lake, 12019 USA • 331 • Ballston Sixnet Technology NYNY 12019 USA 2002 DATASHEET ORDERING INFORMATION 2002 DATASHEET All specifi cations arePark subject to Ushers change.Road Consult factory Lake, for latest info. • • 1.518.877.5173 Fax 1.518.877.8346 [email protected] • Fax 1.518.877.8346 1.518.877.5173 [email protected] ET-16DI2 28-FEB-09 SOLUTIONS FOR YOUR INDUSTRIAL•NETWORKING WWW.SIXNET.COM ET-16DI2 28-FEB-09 ET-8AI2-4AO2-H 8AI and with wiring base Lake, NY 12019 USA •YOUR • Ballston Sixnet Technology Park 3314AO Ushers Road SOLUTIONS FOR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM 2002 DATASHEET SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM • [email protected] 1.518.877.5173 • Fax 1.518.877.8346 As the global experts in communication, monitoring and control for ET-8AI2-4AO2-M Replacement module only Americas ET-16DI2 28-FEB-09 industrial automation and networking, Red Lion has been delivering [email protected] SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGESinnovative solutions for over WWW.SIXNET.COM forty years. Our award-winning Asia-Pacific technology enables companies worldwide to gain real-time data [email protected] visibility that drives productivity. Product brands include Red Lion, Datasheet ET-8AI2-4AO2 Sixnet Technology Park • 331 Ushers Road • Ballston Lake, NY 12019 • USA May 20,in2009 • • N-Tron and Sixnet. With headquarters York, Pennsylvania, the 1.518.877.5173 Fax 1.518.877.8346 [email protected] Europe company has offices across the Americas, Asia-Pacific and Europe. Middle East SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM For more information, please visit www.redlion.net. Red Lion is a Africa w w w. re d l i o n . n e t Spectris company. [email protected] Connect. Monitor. Control. ADLD0166 090913 ©2013 Red Lion Controls +1 (717) 767-6511 All specications are subject to change. Consult factory for latest info.