ACDC 3670 Watts AED Series xppower.com • Low Profile • Single Outputs from 5 V to 48 V • Universal Input • Optional Floating Output • High Power Density • Class II Insulation on 36 W Version • 3 Year Warranty Specification Input General • 90-264 VAC • 47-63 Hz • AED36: 1.00 A max AED45: 1.20 A max AED70: 2.00 A max Inrush Current • AED36: 50 A max at 230 VAC AED45: 100 A max at 230 VAC AED70: 100 A max at 240 VAC Earth Leakage Current • AED36: Class II AED45/70: 3.5 mA max Power Factor • Compliant with EN61000-3-2 Input Voltage Input Frequency Input Current Efficiency Isolation Switching Frequency Power Density MTBF • 85% typical at 230 VAC & 100% load • 3000 VAC Input to Output, 1500 VAC Input to Ground. Negative output is connected to ground. For optional 500 VAC output to ground isolation add suffix ‘-F’ to model number • 60 kHz ±10 kHz • AED36: 5.34 W/in3 AED45: 3.20 W/in3 AED70: 4.98 W/in3 • 200 kHrs to MIL-HDBK-217F at 25 °C, GB Environmental Output Output Voltage Initial Set Accuracy Minimum Load Hold Up Time • • • • Line Regulation Load Regulation Ripple & Noise Overvoltage Protection Overload Protection • • • • • Short Circuit Protection • Temperature • Coefficient See tables ±2% No minimum load requirement AED36: 8 ms min at 115 VAC AED45: 8 ms min at 115 VAC AED70: 20 ms min at 115 VAC ±1% See tables 1% pk-pk max, 20 MHz BW (see note 2) Typical 125% max 120-150% hiccup/trip & restart mode with auto recovery Continuous ±0.05%/˚C Operating Temperature • 0 ˚C to +60 ˚C derate linearly from 100% load at +40 ˚C to 50% load at +60 ˚C Operating Humidity • 93% RH, non-condensing Operating Altitude • 2000 m Storage Temperature • -20 ˚C to +85 ˚C EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Safety Approvals • • • • EN55022 Class B conducted & radiated EN61000-3-2, Class A EN61000-3-3 EN61000-4-2, 8 kV air, 4 kV contact Perf Criteria A • EN61000-4-3, 3 V/m Perf Criteria A • EN61000-4-4, level 2 Perf Criteria A • EN60950-1, UL60950-1 Output Power Maximum 20 W 27 W 30 W 32 W 36 W 36 W 36 W 36 W Output Voltage Nominal 5.0 V 9.0 V 12.0 V 13.5 V 15.0 V 18.0 V 24.0 V 48.0 V Output Current Maximum 4.00 A 3.00 A 2.50 A 2.40 A 2.40 A 2.00 A 1.50 A 0.75 A Load Regulation(1) ±6% ±5% ±5% ±5% ±3% ±2% ±2% ±2% Notes 1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load). 2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor. Mechanical Details 0.47 (12.00) Weight: 0.42 lbs (190 g) approx. Power Cord Order Part: UK - UK-MAINS-8 European - EU-MAINS-8 US - US-MAINS-8 4.33 (110) IEC320-C8 0.79 (20) 1.97 (50) Notes All dimensions shown in inches (mm) Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity. Optional output connectors available. Output cable is 48” (1220mm) approx. Model Number AED36US05 AED36US09 AED36US12 AED36US13 AED36US15 AED36US18 AED36US24 AED36US48 ACDC AED36 Models and Ratings Output Power Maximum 30 W 45 W 45 W 45 W 45 W 45 W 48 W Output Voltage Nominal 5.0 V 12.0 V 15.0 V 18.5 V 19.0 V 24.0 V 48.0 V Output Current Maximum 6.00 A 3.75 A 3.00 A 2.50 A 2.37 A 1.88 A 1.00 A Load Regulation(1) ±6% ±5% ±3% ±2% ±2% ±2% ±2% Model Number AED45US05 AED45US12 AED45US15 AED45US18 AED45US19 AED45US24 AED45US48 Notes 1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load). 2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor. Mechanical Details Weight: 0.73 lbs (330 g) approx. Power Cord Order Part: UK - UK-MAINS-IEC European - EU-MAINS-IEC US - US-MAINS-IEC 2.29 (58) 5.20 (132) IEC320-C14 1.18 (30) Notes All dimensions shown in inches (mm) Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity. Optional output connectors available. Output cable is 48” (1220mm) approx. 3 0.47 (12.00) ACDC AED45 Models and Ratings Output Power Maximum Output Voltage Nominal Output Current Maximum Load Regulation(1) Model Number 70 W 12.0 V 5.50 A ±5% AED70US12 70 W 15.0 V 4.60 A ±3% AED70US15 70 W 18.0 V 3.90 A ±2% AED70US18 70 W 19.0 V 3.70 A ±2% AED70US19 70 W 24.0 V 3.00 A ±2% AED70US24 70 W 48.0 V 1.50 A ±2% AED70US48 Notes 1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% ±40% full load). 2. Measured at the output connector with a 0.1 µF ceramic capacitor and a 10 µF electrolytic capacitor. Mechanical Details Weight: 0.76 lbs (345 g) approx. Power Cord Order Part: UK - UK-MAINS-IEC European - EU-MAINS-IEC US - US-MAINS-IEC 2.28 (58.0) 5.20 (132.0) 0.47 (12.0) IEC320-C14 1.18 (30.0) Notes All dimensions shown in inches (mm). Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity. 2. Optional output connectors available. 3. Output cable is 48” (1220mm) approx. 07-Feb-12 ACDC AED70 Models and Ratings