Minmax MAU202 Dc/dc converter 1w, sip-package, high isolation Datasheet

MAU200 SERIES
DC/DC CONVERTER 1W, SIP-Package, High Isolation
FEATURES
►Industrial Standard SIP-7 Package
►I/O Isolation 3000 VDC
►Operating Ambient Temp. Range -40℃ to +85℃
►For Semi-regulated Type : MA01H Series on Page
►UL/cUL/IEC/EN 60950-1 Safety Approval
PRODUCT OVERVIEW
The MINMAX MAU200 series is a range of 1W DC/DC converters in a small SIP Package featuring high I/O-isolation of 3000VDC.
An excellent efficiency allows an operating temperature range of –40°C to +85°C.
These converters offer an economical solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination,
digital interfaces or for board level power distribution where a higher I/O-isolation is required.
Model Selection Guide
Model
Number
MAU201
MAU202
MAU203
MAU204
MAU205
MAU206
MAU207
MAU208
MAU209
MAU211
MAU212
MAU213
MAU214
MAU215
MAU216
MAU217
MAU218
MAU219
MAU221
MAU222
MAU223
MAU224
MAU225
MAU226
MAU227
MAU228
MAU229
Input
Voltage
(Range)
Output
Voltage
VDC
VDC
3.3
5
9
12
15
±5
±9
±12
±15
3.3
5
9
12
15
±5
±9
±12
±15
3.3
5
9
12
15
±5
±9
±12
±15
5
(4.5 ~ 5.5)
12
(10.8 ~ 13.2)
24
(21.6 ~ 26.4)
Output Current
Input Current
Max.
Min.
@Max. Load
@No Load
mA
260
200
110
84
67
±100
±56
±42
±34
260
200
110
84
67
±100
±56
±42
±34
260
200
110
84
67
±100
±56
±42
±34
mA
5
4
2
1.5
1
±2
±1
±0.8
±0.7
5
4
2
1.5
1
±2
±1
±0.8
±0.7
5
4
2
1.5
1
±2
±1
±0.8
±0.7
mA(typ.)
235
281
260
258
258
278
262
258
258
96
114
106
105
104
113
106
104
105
49
59
54
54
53
58
55
53
53
mA(typ.)
30
12
7
Load
Regulation
Max. capacitive
Load
% (max.)
10
10
8
7
7
10
8
7
7
8
8
5
5
5
8
5
5
5
8
8
5
5
5
8
5
5
5
μF
@Max. Load
220
100#
220
100#
220
100#
# For each output
E-mail:[email protected]
2015/07/31 REV:7
Tel:886-6-2923150
Page 1 of 4
Efficiency
(typ.)
%
73
71
76
78
78
72
77
78
79
74
73
78
80
80
74
79
81
81
73
71
76
78
79
72
76
79
80
MAU200 SERIES
DC/DC CONVERTER 1W, SIP-Package, High Isolation
Input Specifications
Parameter
Input Voltage Range
Input Surge Voltage (1 sec. max.)
Input Filter
Model
Min.
Typ.
Max.
5V Input Models
4.5
5
5.5
12V Input Models
10.8
12
13.2
24V Input Models
21.6
24
26.4
5V Input Models
-0.7
---
9
12V Input Models
-0.7
---
18
24V Input Models
-0.7
---
30
All Models
Unit
VDC
Internal Capacitor
Output Specifications
Parameter
Conditions
Output Voltage Setting Accuracy
Output Voltage Balance
Min.
Typ.
Max.
Unit
---
±1.0
±3.0
%Vnom.
Dual Output, Balanced Loads
---
±0.1
±1.0
%
Line Regulation
For Vin Change of 1%
---
±1.2
±1.5
%
Load Regulation
Io=20% to 100%
Ripple & Noise
0-20 MHz Bandwidth
Temperature Coefficient
Short Circuit Protection
See Model Selection Guide
---
65
100
mV P-P
---
±0.01
±0.02
%/℃
0.5 Second Max., Automatic Recovery
General Specifications
Parameter
Conditions
Min.
Typ.
Max.
Unit
60 Seconds
3000
---
---
VDC
I/O Isolation Resistance
500 VDC
10
---
---
GΩ
I/O Isolation Capacitance
100KHz, 1V
---
60
100
pF
70
100
120
KHz
I/O Isolation Voltage
Switching Frequency
MTBF (calculated)
Safety Approvals
MIL-HDBK-217F@25℃, Ground Benign
2,000,000
UL/cUL 60950-1 recognition (CSA certificate), IEC/EN 60950-1(CB-report)
Hours
Environmental Specifications
Parameter
Operating Ambient Temperature Range (See
Power Derating Curve)
Conditions
Min.
Max.
Unit
Natural Convection
-40
+85
℃
℃
Case Temperature
---
+90
Storage Temperature Range
-50
+125
℃
Humidity (non condensing)
---
95
% rel. H
260
℃
Cooling
Natural Convection
Lead Temperature (1.5mm from case for 10Sec.)
E-mail:[email protected]
2015/07/31 REV:7
Tel:886-6-2923150
Page 2 of 4
---
MAU200 SERIES
DC/DC CONVERTER 1W, SIP-Package, High Isolation
Power Derating Curve
100
100
Natural
Convection
20LFM
Natural
Convection
20LFM
80
Output Power (%)
Output Power (%)
80
400LFM
60
40
20
400LFM
60
40
20
0
0
~
-40
0
20
40
60
Ambient Temperature
100 110
80
~
-40
0
20
40
60
100 110
80
Ambient Temperature C
C
(3.3V, 5V & ±5V}
(all other output)
Notes
1
2
3
4
5
6
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these
modules; however they may not meet all specifications listed.
We recommend to protect the converter by a slow blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory.
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
Pin Connections
0.5
Pin
Single Output
Dual Output
1
+Vin
+Vin
2
-Vin
-Vin
5
-Vout
-Vout
6
No Pin
Common
7
+Vout
+Vout
[0.13]
3.2
10.2 [0.40]
0.5 [0.02]
19.5 [0.77]
T: 6.1mm(0.24 inch) for 5V&12V Input Models
[0.02]
2.4
[0.09]
2.54
7.62
2X2.54
[0.10]
[0.30]
[2X0.10]
T: 7.1mm(0.28 inch) for 24V Input Models
18.5 [0.73]
T
Bottom View
5
6
7
0.50
[0.02]
X.XX±0.13 ( X.XXX±0.005)
Physical Characteristics
Case Size (5V&12V Input)
Case Size (24V Input)
:
:
19.5x6.1x10.2mm (0.77x0.24x0.40 inches)
19.5x7.1x10.2mm (0.77x0.28x0.40 inches)
Case Material
:
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Pin Material
:
Alloy 42
Weight (5V&12V Input)
Weight (24V Input)
:
:
2.2g
2.6g
E-mail:[email protected]
2015/07/31 REV:7
Tel:886-6-2923150
Page 3 of 4
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
0.25 [0.01]
2
1.3 [0.05]
1
► Pins ±0.05(±0.002)
MAU200 SERIES
DC/DC CONVERTER 1W, SIP-Package, High Isolation
Test Setup
Peak-to-Peak Output Noise Measurement Test
Use a Cout 0.33μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load
between 50 mm and 75 mm from the DC/DC Converter.
+Vin
+Out
Copper Strip
Single Output
DC / DC
Converter
-Vin
Cout
-Out
Scope
Resistive
Load
Copper Strip
+Vin
+Out
Copper Strip
Dual Output
DC / DC
Converter
Com.
Copper Strip
-Vin
-Out
Scope
Cout
Resistive
Load
Cout
Scope
Copper Strip
Technical Notes
Maximum Capacitive Load
The MAU200 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up,
affecting the ramp-up and the startup time. For optimum performance we recommend 100μF maximum capacitive load for dual outputs and 220μF capacitive load
for single outputs. The maximum capacitance can be found in the data sheet.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In
applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup.
Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR <
1.0Ω at 100 KHz) capacitor of a 2.2μF for the 5V input devices, a 1.0μF for the 12V input devices and a 0.47μF for the 24V devices.
+
DC Power
Source
+Vin
+
+Out
DC / DC
Converter
Load
Cin
-
-Vin
-Out
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance.
recommended to use 1.0μF capacitors at the output.
+
+Vin
-
+
+Out
Single Output
DC / DC
Converter
DC Power
Source
-Vin
Cout
+Vin
Load
-Out
-
+Out
Dual Output
DC / DC Com.
Converter
DC Power
Source
To reduce output ripple, it is
-Vin
-Out
Cout
Load
Load
Cout
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the
maximum temperature rating of the components inside the power module, the case temperature must be kept below 90℃. The derating curves are determined from
measurements obtained in a test setup.
Position of air velocity
probe and thermocouple
15mm / 0.6in
50mm / 2in
Air Flow
DUT
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected]
Minmax Technology Co., Ltd.
2015/07/31 REV:7
Page 4 of 4
Similar pages