JDS OAB1552-20SC4 Benchtop erbium-doped fiber amplifier Datasheet

COMMUNICATIONS TEST & MEASUREMENT
Benchtop Erbium-Doped Fiber Amplifier
EDFA Series
Key Features
• Choice of wavelengths C- or L- bands
• High output power and gain
• Mid-span access
• Compact benchtop design with rackmount kit
• Single channel and multichannel dense wavelength
division multiplexing (DWDM) capabilities
• RS-232 remote control
Applications
• Pre-amp booster, in-line amplifier
emulation
• Dense wavelength division multiplexing (DWDM) transmission,
for multichannel applications
• SONET/SDH systems, for single
channel applications
Safety Information
Complies to CE requirements plus
UL3101-1 and CAN/CSA-C22.2
No. 1010.1 Meets the requirements
of Class 3B in standard IEC
60825-1(2002) and complies with
21CFR1040.10 except deviations
per Laser Notice No. 50, July 2001.
WEBSITE : www.jdsu.com
The Benchtop Erbium-Doped Fiber Amplifier (EDFA) amplifies optical signals
across the EDFA window (1528 to 1610 nm). Through optimization of
amplifier gain, noise figure, and saturated output power, the EDFA will expand
your test capabilities in systems, components or sub-assembly manufacturing
as well as research and development (R&D) environments.
The amplifier incorporates a unique design to produce maximum signal gain
and saturated output power in the 1550 and 1590 nm test bands while
minimizing noise figure. It features a user-friendly front panel housing an LCD
displaying input/output power, current control and an optical interface.
The amplifier is offered in C-band, L-band and C+L-band versions and
pre-amplifier, booster, or in-line amplifier configurations.
The Benchtop models provide specialized variants and optical performance not
available in the Multiple Application Platform (MAP) line. Additional EDFA
models are available in the MAP EDFA product line.
BENCHTOP ERBIUM-DOPED FIBER AMPLIFIER
2
Specifications
MODEL
Test band
Amplifier type
Operating wavelength range
Input signal
Saturated output power 1
Noise figure 2
Small signal gain 3
Spectral gain flatness 4
Polarization dependent loss (PDL)
Polarization mode dispersion (PMD)
Input/output isolation
Input/output monitors
Input voltage
Power consumption
Packaging
Operating temperature
Storage temperature
Humidity
Dimensions (W x H x D)
Weight
OAB1552
C-band
Booster
high power
1528 to
1563 nm
Single
>24 dBm
< 5.0 dB
> 36 dB
N/A
≤ 0.2 dB
≤ 0.45 ps
45/32 dB
OAB1592
L-band
Booster
high power
OAB1596
OAB1598
OAB1562 OAB1564
L-band
L-band
C+L-band C+L-band
Mid-span
Booster
Booster
In-line
access
DWDM
DWDM
1565 to
1570 to
1570 to
1530 to 1560 nm
1610 nm
1603 nm
1603 nm
1570 to 1600 nm
channel
Multichannel DWDM
Single Channel
> 22 dBm
> 20 dBm
> 20 dBm
> 19 dBm
> 14 dBm
< 5.5 dB
< 5.8 dB
< 5.5 dB
< 6.5 dB
< 6.5 dB
> 29 dB
> 22 dB
>20 dB
> 22 dB
> 20 dB
(MS loss ≤ 7 dB)
N/A
1.7 dB
1.7 dB
N/A
N/A
≤ 0.3 dB
≤ 0.3 dB
≤ 0.9 dB
≤ 0.4 dB
≤ 0.4 dB
≤ 0.8 ps
≤ 0.9 ps
≤ 0.9 ps
≤ 0.7 ps
≤ 0.7 ps
40/40 dB
40/40 dB
40/40 dB
40/40 dB
40/40 dB
Yes
100 to 240 V AC, 50 to 60 Hz
90 V A Maximum
Half-rack benchtop and 19-inch rackmount kit
0 to 50 °C
- 40 to 70 °C
Maximum 95 % RH non-condensing from 0 to 45 °C
21.2 x 8.9 x 35.5 cm
> 4 kg
1. Saturated Output Power measured:
At 1550 nm at Pin = - 4 dBm for model 1552
At 1590 nm at Pin = 0 dBm for model 1592 and 1598
At 1590 nm at Pin = - 2 dBm for model 1596
At 1550 nm at Pin = - 4 dBm and at 1590 nm and Pin - 0 dBm for model 1562 and 1564
2. Noise figure measured:
At Pin = - 4 dBm for model 1552 and 1592
At Pin = - 4 dBm for model 1596
At Pin = 0 dBm for model 1598
At Pin = - 20 dBm for model 1562 and 1564
3. Small signal gain measured:
At Pin = -20 dBm for model 1552, 1562, 1564, and 1592
At Pin = -2 dBm for model 1596
At Pin = 0 dBm for model 1598
4. Flatness optimized for:
At Pin = -2 dBm (1570-1603 nm)
At Pin = 0 dBm (1570-1603 nm)
BENCHTOP ERBIUM-DOPED FIBER AMPLIFIER
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
[email protected].
Sample: OAB1552+20FP0
+ 2
OAB
Code
1552
1592
1596
1598
1562
1564
Description
C-band Booster high power
L-band Booster high power
L-band Mid-span access DWDM
L-band Booster DWDM
C+L-band Booster
C+L-band In-Line
Code
FP
FA
SC
SU
Code
0
2
Connector
Type
FC/PC
FC/APC
SC/PC
SC/APC
Code
0
4
6
Output Power
Standard output power
Booster high output power,
22 dBm (available for OAB1592)
Booster high output power,
24 dBm (available for OAB1552)
Characteristics
unflattened
Gain flattened
DWDM (available for OAB1596
and OAB1598)
Standard Accessories
Part Number
Description
ED000899-A-00 Standard 19-inch rackmount kit
Optional Accessories
Part Number
Description
ED000899-A-01 Rackmount kit (Japan)
Test & Measurement Regional Sales
NORTH AMERICA
TOLL FREE : 1 866 228 3762
FAX : +1 301 353 9216
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase
Corporation. All rights reserved. 10109630 Rev. 007 10/06
LATIN AMERICA
TEL : +55 11 5503 3800
FAX : +55 11 5505 1598
ASIA PACIFIC
TEL : +852 2892 0990
FAX : +852 2892 0770
EMEA
TEL : +49 7121 86 2222
FAX : +49 7121 86 1222
WEBSITE : www.jdsu.com
Similar pages