LB2SA thru LB10SA Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier Reverse Voltage 200 and 1000V Forward Current 0.8A Features ◆ Low Profile: Typical height of 1.4mm ~ ◆ Ideal for automated placement ◆ High surge current capability ~ ◆ Solder Dip 260℃，10seconds + Mechanical Data ◆ Case:SOPA-4 Epoxy meets UL-94V-0 Flammability rating ◆ Terminals:Matte tin plated ldads, solderable per J-STD-002B and JESD22-B102D ◆ Polarity:As markde on body Maximum Ratings & Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Parameter Symbol LB2SA LB4SA LB6SA LB8SA LB10SA Unit Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 V Maximum RMS voltage VRMS 140 280 420 560 700 V Maximum DC blocking voltage VDC 200 400 600 800 1000 V Maximum Average forward output rectified current on glass-eposy P.C.B IF(AV) A 1.0 on aluminum substrate Peak forward surge current 8.3 ms single sine-wave 0.8 IFSM 25 A superimposed on rated load (JEDEC Method) Rating for fusig (t<8.3ms) Maximum instantaneous forward voltage drop I2t 2.6 VF 0.95 A2sec V per diode at 0.4A Maximum DC reverse current at TA=25℃ rated DC blocking voltage per leg TA=125℃ Typical thermal resistance per leg (Note 1) Operating junction temperature range Storage temperature range IR µA 500 RθJA 80 RθJL 25 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Notes: 1. Device mounted P.C.B with 0.47x0.47''(12mmx12mm) Copper Pads. 2. JEDEC registered values 5 ℃/W LB2SA thru LB10SA Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier Reverse Voltage 200 and 1000V Forward Current 0.8A RATINGS AND CHARACTERISTIC CURVES (TA=25℃ unless ontherwise noted)