AC-DC 15-24 Watts xppower.com AEH Series • Output Voltages from 3- 48 VDC Available • Non-Standard Outputs • Universal Input • +70 ºC Operating Temperature • High Efficiency - Up to 85% • Class 1 Earthing • Non-standard Connectors Available Specification Input Input Voltage Input Frequency Input Current • 90-264 VAC • 47-63 Hz • 0.4 A for AEH15, at 230 VAC 0.7 A for AEH24, at 230 VAC Inrush Current • 15/30 A max at 115/230 VAC 100% load, cold start Earth Leakage Current • <0.5 mA max at 115 VAC/60Hz <0.75 mA max at 230 VAC/50Hz Output Output Voltage • See tables (factory set). Non-standard voltages available - contact sales Initial Set Accuracy • 5% Start Up Delay • 2 s max Hold Up Time • 20 ms min at full load and 115 VAC Line Regulation • See tables Load Regulation • See tables Transient Response • 4% max. deviation, recovery to within 1% in 500 µs for a 25% load change Ripple & Noise • 2% pk-pk, 20 MHz BW Overvoltage Protection • 112-132% Vnom, auto reset Overload Protection • 112-132% of nominal, auto recovery Temperature • ±0.04% /˚C max Coefficient General Efficiency Isolation MTBF • Up to 85% • 3000 VAC Input to Output 1500 VAC Input to Ground 500 VAC Output to Ground • 100 kHrs per MIL-HDBK-217F Environmental Operating Temperature • 0 ˚C to +70 ˚C, derate linearly from full load at +40 ˚C to half load at +70 ˚C Operating Humidity • 5-95 % RH, non-condensing Storage Temperature • -40 ˚C to +85 ˚C Vibration • 2 g on 3 axes EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Dips & Interruptions Safety Approvals • • • • • • • • • EN55022 level B, conducted and radiated EN61000-3-2, Class A EN61000-3-3 EN61000-4-2, level 2 Perf Criteria A EN61000-4-3, level 3 Perf Criteria A EN61000-4-4, level 2 Perf Criteria A EN61000-4-5, level 3 Perf Criteria A EN61000-4-6, level 2 Perf Criteria A EN61000-4-11 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B • EN60950, UL60950, CSA C22.2 No. 950 per cUL, UL60950 Output Power 8.25 W 12.00 W 12.00 W 15.00 W 15.00 W 15.00 W 15.00 W 15.00 W 15.00 W 15.00 W 15.00 W Output Voltage Nominal(1) 3.3 V 5.0 V 7.0 V 10.0 V 12.0 V 15.0 V 18.0 V 24.0 V 30.0 V 36.0 V 48.0 V Output Current Minimum Maximum 0.0 A 2.50 A 0.0 A 2.40 A 0.0 A 1.70 A 0.0 A 1.50 A 0.0 A 1.25 A 0.0 A 1.00 A 0.0 A 0.80 A 0.0 A 0.62 A 0.0 A 0.50 A 0.0 A 0.40 A 0.0 A 0.30 A Total Regulation(2) 7% 5% 5% 5% 5% 5% 5% 5% 5% 3% 3% Model Number AEH15US03 AEH15US05 AEH15US07 AEH15US10 AEH15US12 AEH15US15 AEH15US18 AEH15US24 AEH15US30 AEH15US36 AEH15US48 Notes 1. Factory-set non-standard outputs available in single output versions. 2. Total regulation includes initial set accuracy, line and load regulation. Mechanical Details Notes 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) max. 3. Output connector is 5.5mm outer diameter barrel. Inner diameter is 2.5mm with centre positive (+) and outer shell negative (-). 4. Output cable length is 72.0 (1830). 5. Optional output connectors available. Contact sales office. 6. Weight 0.3 lb (135 g) approx. 7. For UK mains lead order part: UK-MAINS-IEC. For European mains lead order part: EU-MAINS-IEC. 1.5 (38.0) AC Input IEC 320 Inlet 1.42 (36.0) 3.58 (91.0) Models and Ratings Output Power 15.00 W 20.00 W 22.00 W 24.00 W 24.00 W 24.00 W 24.00 W 24.00 W 24.00 W 24.00 W Output Voltage Nominal(1) 5.0 V 7.0 V 10.0 V 12.0 V 15.0 V 18.0 V 24.0 V 30.0 V 36.0 V 48.0 V Output Current Minimum Maximum 0.0 A 3.00 A 0.0 A 2.80 A 0.0 A 2.20 A 0.0 A 2.00 A 0.0 A 1.60 A 0.0 A 1.30 A 0.0 A 1.00 A 0.0 A 0.80 A 0.0 A 0.66 A 0.0 A 0.50 A Total Regulation(2) 5% 5% 5% 5% 5% 5% 3% 3% 3% 2% Model Number AEH24US05 AEH24US07 AEH24US10 AEH24US12 AEH24US15 AEH24US18 AEH24US24 AEH24US30 AEH24US36 AEH24US48 Notes 1. Factory-set non-standard outputs available in single output versions. 2. Total regulation includes initial set accuracy, line and load regulation. Mechanical Details AC Input IEC 320 Inlet Notes 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) max. 3. Output connector is 5.5mm outer diameter barrel. Inner diameter is 2.5mm with centre positive (+) and outer shell negative (-). 4. Output cable length is 72.0 (1830). 5. Optional output connectors available. Contact sales office. 6. Weight 0.47 lb (215 g) approx. 7. For UK mains lead order part: UK-MAINS-IEC. For European mains lead order part: EU-MAINS-IEC. 4.17 (106.0) 1.18 (30.0) 2.56 (65.0) 08-Nov-07 AC-DC AEH Models and Ratings