Coilcraft MLC1265-361ML Smt power inductor Datasheet

Document 327-1
SMT Power Inductors – MLC Series
• Soft saturation makes them ideal for VRD/VRM applications
• Special materials eliminate all thermal aging issues.
Designer’s Kit C387 contains samples of all values
Core material Iron
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS tin-silver over copper. Other terminations
available at additional cost.
Weight MLC12XX 1.91 – 3.03 g; MLC15XX 2.73 – 4.72 g
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature: The part may be operated without
damage as long its temperature (ambient + self-heating) does not
exceed +125°C.
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Only pure water or alcohol recommended
Part number1
L2
±20%
(µH)
DCR
Isat (A)4
(mOhm)
SRF3 10% 20%
typ max (MHz) drop drop
Irms (A)5 Height
20°C 40°C max
rise
rise (mm)
10.5 mm × 11.4 mm body size
MLC1265-361ML_
0.36
0.93
MLC1260-401ML_
0.40
0.93
MLC1255-421ML_
0.42
0.93
MLC1240-451ML_
0.45
1.73
1.03
1.03
1.03
1.91
234
228
219
198
26.9
21.0
21.1
16.5
42.6
35.2
34.5
24.9
16.5
16.3
16.8
12.8
22.7
21.9
24.1
19.8
6.5
6.1
5.6
4.1
MLC1265-701ML_
MLC1250-801ML_
MLC1240-901ML_
MLC1260-122ML_
MLC1255-122ML_
0.70
0.80
0.90
1.20
1.20
1.24
2.35
2.57
2.38
2.38
1.37
2.59
2.83
2.62
2.62
134
151
108
93
85
16.4
13.3
13.9
14.0
14.1
27.5
21.7
22.8
23.3
22.4
15.2
12.4
11.9
12.3
12.4
21.0
17.3
16.3
17.6
17.5
6.5
5.1
4.1
6.1
5.6
MLC1250-132ML_
MLC1245-152ML_
MLC1260-172ML_
MLC1245-402ML_
1.30
1.50
1.75
4.00
2.38
4.08
2.84
8.18
2.62
4.49
3.13
9.00
76
79
72
46
10.8
10.7
12.1
7.42
17.7
17.3
19.2
11.8
11.7
10.3
10.9
6.9
16.5
14.2
15.3
9.8
5.3
4.6
6.1
4.8
13.2 mm × 14.0 mm body size
MLC1565-451ML_
0.45
0.864
MLC1565-501ML_
0.50
0.864
MLC1555-551ML_
0.55
1.34
MLC1565-801ML_
0.80
1.20
0.951 158
0.951 132
1.48 165
1.32
93
32.8
21.3
20.8
27.4
54.0
38.1
35.7
47.4
18.0
18.6
16.1
17.4
25.6
26.9
22.3
24.6
6.5
6.5
5.6
6.5
MLC1560-901ML_
MLC1538-102ML_
MLC1550-102ML_
MLC1565-142ML_
MLC1538-152ML_
0.90
1.00
1.00
1.40
1.50
1.72
3.46
1.72
2.20
4.36
1.90
3.81
1.90
2.42
4.80
101
81
76
77
50
17.8
13.6
16.1
18.9
13.4
28.7
21.2
27.3
30.1
21.0
14.6
11.5
13.9
13.7
10.6
20.6
16.7
19.7
19.9
14.6
6.0
3.9
5.2
6.5
3.9
MLC1565-202ML_
MLC1550-252ML_
MLC1565-282ML_
MLC1555-302ML_
MLC1550-452ML_
2.00
2.50
2.80
3.00
4.50
3.56
3.43
4.10
4.06
7.13
3.82
3.74
4.51
4.47
7.85
64
45
44
42
36
15.2
10.9
13.7
11.1
7.12
24.2
17.7
22.3
18.1
11.8
11.6
11.5
10.7
10.9
8.43
16.3
15.8
15.2
15.6
11.7
6.5
5.2
6.5
5.6
5.2
1. Please specify termination and packaging codes:
MLC1550-452MLC
Termination: L = RoHS compliant tin-silver over copper.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape.
B= Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked.
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
using a Coilcraft SMD-A fixture in an Agilent/HP 4284A
LCR meter.
3. SRF measured using an Agilent/HP4291A impedance
analyzer and a Coilcraft 16193 fixture.
4. DC current at which the inductance drops the specified
amount from its value without current.
5. Current that causes the specified temperature rise from
25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
Document 327-1
Revised 07/23/09
Document 327-2
SMT Power Inductors - MLC Series
Typical L vs Current
Typical L vs Frequency
10
MLC1550-452
MLC1550-452
MLC1565-282
MLC1565-282
Inductance (µH)
Inductance (µH)
10
MLC1538-152
MLC1538-102
1
MLC1555-551
MLC1265-361
MLC1538-152
MLC1538-102
1
MLC1555-551
MLC1265-361
0.1
0.1
0.01
1
0.1
0.1
10
1
10
100
Current (A)
Frequency (MHz)
Inductance vs current is unaffected by part temperature up to 135°C.
Temperature Rise vs Current
MLCxxxx
-xxxMLC
B
C
Recommended
Land Pattern
H
D
MLC
155
0-45
2
ML
C
ML 1538
C
1
1
ML 56 52
C1 5-2
53 82
8-1
02
A
Temperature rise (from 25°C)
70
60
50
ML
C
ML 155
C1 5-5
26 51
536
1
Dimensions
40
30
20
10
0
E
0
F
5
10
15
20
25
Current (A rms)
G
F
Weight:
MLC12XX 1.91 – 3.03 g; MLC15XX 2.73 – 4.72 g
Body
A
B
Size
max
max
1240
11.2
10.5
1245
11.2
10.5
1250
11.2
10.5
1255
11.4
10.5
1260
11.4
10.5
1265
11.4
10.5
1538
13.8
13.2
1550
13.8
13.2
1555
13.8
13.2
1560
13.8
13.2
1565
14.0
13.2
All dimensions are in mm.
C
max
4.1
4.6
5.1
5.6
6.1
6.5
3.9
5.2
5.6
6.0
6.5
D
1.8
1.8
1.8
1.8
1.8
1.8
2.4
2.4
2.4
2.4
2.4
E
2.3
2.3
2.3
2.3
2.3
2.3
3.0
3.0
3.0
3.0
3.0
F
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
5.0
5.0
G
4.0
4.0
4.0
4.0
4.0
4.0
5.4
5.4
5.4
5.4
5.4
H
2.7
2.7
2.7
2.7
2.7
2.7
3.4
3.4
3.4
3.4
3.4
Tape and Reel
MLC1240
MLC1245
MLC1250
MLC1255
MLC1260
MLC1265
MLC1538
MLC1550
MLC1555
MLC1560
MLC1565
250/7″ reel;
200/7″ reel;
200/7″ reel;
200/7″ reel;
175/7″ reel;
150/7″ reel;
200/7″ reel;
150/7″ reel;
150/7″ reel;
150/7″ reel;
125/7″ reel;
24 mm tape width
24 mm tape width
24 mm tape width
24 mm tape width
24 mm tape width
24 mm tape width
24 mm tape width
24 mm tape width
24 mm tape width
24 mm tape width
24 mm tape width
7″ reels are stocked; 13″ reels are factory orders only.
For packaging data see Tape and Reel Specifications section.
Specifications subject to change without notice.
Please check our website for latest information.
© Coilcraft, Inc. 2009
900/13″ reel
800/13″ reel
700/13″ reel
700/13″ reel
600/13″ reel
600/13″ reel
800/13″ reel
600/13″ reel
500/13″ reel
500/13″ reel
500/13″ reel
Document 327-2
Revised 07/23/09
Similar pages