Coto CT10-1040-A2 Encapsulated molded switch Datasheet

CT10 SERIES ENCAPSULATED MOLDED SWITCH
NEW!
CT10 -G2
CT10 Series
The CT10 is an encapsulated molded dry reed switch. It is single-pole, single throw
(SPST) type, having normally open ruthenium contacts.
The sensor is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both.
The device is designed for SMD mounting and is available in three lead configurations.
* NEW CT10-G2 now 260 ºC process temperature hardy.
CT10 Series Features
u Ideal for SMD pick and place
u Tape and reel packaging
u 10W rating
u Rugged encapsulation
u Excellent life and reliability
u RoHS compliant
MODEL NUMBER
Parameters
OPERATING CHARACTERISTICS
APPLICATIONS
u Proximity Sensing
u Security Alarm Sensor
u Level Sensor
u Flow Sensor
u Pulse Counter
CT10-XXXX-YY
Units
Operate Range
AT
10-40
Release Range
AT
3-35
ELECTRICAL CHARACTERISTICS
Switched Power (max)
W
10
Switched Voltage DC (max)
V
200
Switched Voltage AC, RMS value (max)
V
140
Switched Current DC (max)
mA
500
Switched Current AC, RMS value (max)
mA
500
Carry Current DC (max)
A
0.5
Breakdown Voltage (min)
V
230
Contact Resistance (initial max)
mΩ
200
Insulation Resistance (min)
MΩ
106
Storage Temperature
ºC
-40 to + 125
Operating Temperature
ºC
-40 to + 125
Vibration Resistance
G
10
Shock Resistance
G
100
ENVIRONMENTAL RATINGS
NOTES
AT values measured using a Philips 10JK coil.
Surface mount component processing temperature Model G1 & G2: 500°F(260°C) max for 1 minute dwell time; Model G4 & A2:
439°F(226°C) max for 1 minute dwell time.
u Temperature measured on leads where lead exits molded package.
u
u
06242015
tel: (401) 943.2686
|
fax: (401) 942.0920
DIMENSIONS
in Inches (Millimeters)
CT10-XXXX-G1
CT10-XXXX-G2
.635/.645 (16.13/16.38mm)
.458 (11.6mm) Max.
.765/.775 (19.43/19.68mm)
.115 (2.92mm) Max.
.115 (2.92mm) Max.
.025 (.63mm) Max.
.010±.002
.458 (11.63mm) Max.
0.012±0.003 STRESS RELIEF
.040 (1.02mm) Max.
.040 (1.02mm) Max.
.025 (.63mm)
.035/.045 (.89/1.14mm)
.035/.045 (.89/1.14mm)
.095 (2.41mm) Max.
.030 (.76mm) Max.
.030 (.76mm) Max.
.095 (2.41mm) Max.
CT10-XXXX-G4
CT10-XXXX-A2
.765-.775 (19.4-19.7mm)
.505 (12.8mm)
105º Ref.
.010 (0.25mm)
.045 (1.1mm) intersection
.035 (0.9)
.015 (0.38mm)
.505 (12.8mm)
(SIDE VIEW)
.005±.005 (0.127±0.127mm)
Below Stando Surface
.095 (2.41mm)
.057 (1.45mm)
.609/.619 (15.47/15.72mm)
.250 (6.35mm)
Ø.040 (1.02mm)
(BOTTOM VIEW)
.045 (1.14mm) Max.
.095 (2.4mm)
.040 (1.01mm)
.045 (1.14mm)
.045 (1.14mm)
.095 (2.41mm) Max.
ORDERING INFORMATION
CT10-XXXX-YY
A complete part number is represented by the digits to the right of the
CT10 series prefix followed by a suffix as shown below.
Series
CT10
EXAMPLE: CT10-1030-G1 is
a CT10 sensor (10mm encapsulated switch)
with a sensitivity range from 10 to 30AT
lead ends are formed according to the G1 version
For most recent data visit www.cotorelay.com
Lead Configuration Subset:
G1 for Gull Wing Version 1 (16.4mm)
G2/G4 for Gull Wing Version 2 (19.6mm)
A2 for Axial
AT Range (measured after mold & lead form)
10-30; 10-40
06242015
COTO TECHNOLOGY, INC.
Similar pages