FEATURES • 5 WATTS OUTPUT POWER • OUTPUT CURRENT UP TO 1000mA • STANDARD 1.25 X 0.80 X 0.40 INCH • HIGH EFFICIENCY UP TO 84% • 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • FIXED SWITCHING FREQUENCY • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • UL60950-1, EN60950-1 AND IEC60950-1 LICENSED • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC OPTIONS APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment SMD TYPE, M1 TYPE, M2 TYPE DESCRIPTION The FKC05 series offer 5 watts of output power from a package in an IC compatible 24pin DIP configuration without derating to 71ºC ambient temperature and pin to pin compatible with FKC03 series. FKC05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. FKC05-W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted INPUT SPECIFICATIONS OUTPUT SPECIFICATIONS Output power Voltage accuracy Full load and nominal Vin ± 1% Minimum load LL to HL at Full Load Cross regulation(Dual) Single Dual Asymmetrical load 25% / 100% FL Ripple and noise 20MHz bandwidth Load regulation ± 0.2% ± 0.5% ± 1% ± 5% No Load to Full Load See table ±0.02% / ºC, max. Temperature coefficient Transient response recovery time 25% load step change Over load protection 200μS % of FL at nominal input Short circuit protection 170%, typ. Continuous, automatics recovery GENERAL SPECIFICATIONS Efficiency See table Input to Output Input ( Output ) to Case DIP SMD 1600VDC, min. 1600VDC, min. 1000VDC, min. 9 Isolation resistance 10 ohms, min. Isolation capacitance Switching frequency Approvals and standard Input surge voltage 100mS max Input reflected ripple current Nominal Vin and full load Nominal Vin and Start up time constant resistive load Power up 36VDC 50VDC 100VDC 20mAp-p 450mS, max. ENVIRONMENTAL SPECIFICATIONS Standard -25ºC~+85ºC (with derating) Operating ambient temperature M1 (Note 6) -40ºC~+85ºC (non-derating) M2 (W series) -40ºC~+85ºC (with derating) Standard +100ºC Maximum case temperature M1 +105ºC Storage temperature range Thermal impedance -55ºC ~ +105ºC Nature convection 20ºC/watt MIL-STD-810F MIL-STD-810F 300KHz, typ. Relative humidity IEC60950-1, UL60950-1, EN60950-1 Non-conductive black plastic MTBF (Note 1) Pi type 12V input 24V input 48V input Vibration Base material Weight Input filter Thermal shock Nickel-coated copper Dimensions FKC05-W 9 – 18VDC 18 – 36VDC 36 – 75VDC 9 – 36VDC 18 – 75VDC 300pF, max. Case material Potting material 12V nominal input 24V nominal input 48V nominal input 24V nominal input 48V nominal input Input voltage range 0% Line regulation Isolation voltage FKC05 5 Watts, max. Epoxy (UL94-V0) 1.25 X 0.80 X 0.40 Inch (31.8 X 20.3 X 10.2 mm) DIP 16g (0.55oz) SMD 18g (0.62oz) 6 BELLCORE TR-NWT-000332 3.165 x 10 hrs 6 1.631 x 10 hrs MIL-HDBK-217F 5% to 95% RH EMC CHARACTERISTICS EMI EN55022 Class A ESD EN61000-4-2 ± 8KV Air Contact ± 6KV Radiated immunity EN61000-4-3 10 V/m Perf. Criteria A Fast transient (Note 7) EN61000-4-4 ± 2KV Perf. Criteria B Perf. Criteria A Surge (Note 7) EN61000-4-5 ± 1KV Perf. Criteria B Conducted immunity EN61000-4-6 10 Vr.m.s Perf. Criteria A Page 1 of 3 Issued Date：2008/05/21 Model Number Input Range FKC05-12S33 FKC05-12S05 FKC05-12S12 FKC05-12S15 FKC05-12D05 FKC05-12D12 FKC05-12D15 FKC05-24S33 (W) FKC05-24S05 (W) FKC05-24S12 (W) FKC05-24S15 (W) FKC05-24D05 (W) FKC05-24D12 (W) FKC05-24D15 (W) FKC05-48S33 (W) FKC05-48S05 (W) FKC05-48S12 (W) FKC05-48S15 (W) FKC05-48D05 (W) FKC05-48D12 (W) FKC05-48D15 (W) 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC (4) (4) (5) Output Current Input Current Eff Output Output Capacitor (3) (2) Voltage Min. load Full load Ripple & Noise No load (%) Load max Full load 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 1000mA 1000mA 470mA 400mA ± 500mA ± 230mA ± 190mA 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 10mA 10mA 10mA 10mA 15mA 20mA 15mA 10mA(5mA) 15mA(10mA) 15mA(5mA) 15mA(10mA) 15mA(10mA) 20mA(10mA) 20mA(10mA) 10mA(5mA) 10mA(10mA) 10mA(10mA) 10mA(10mA) 10mA(10mA) 5mA(10mA) 10mA(10mA) 382mA 563mA 603mA 649mA 563mA 597mA 594mA 194mA (191mA) 285mA (278mA) 305mA (305mA) 325mA (312mA) 274mA (282mA) 288mA (295mA) 308mA (297mA) 98mA (100mA) 143mA (138mA) 151mA (155mA) 162mA (160mA) 141mA (145mA) 147mA (151mA) 150mA (156mA) 76 78 82 81 78 81 84 75 (76) 77 (79) 81 (81) 81 (84) 80 (78) 84 (82) 81 (84) 74 (73) 77 (79) 82 (80) 81 (82) 78 (76) 82 (80) 83 (80) 2200μF 1000μF 220μF 150μF ± 680μF ± 100μF ± 68μF 2200μF 1000μF 220μF 150μF ± 680μF ± 100μF ± 68μF 2200μF 1000μF 220μF 150μF ± 680μF ± 100μF ± 68μF Note 8. FKC05-48S05 Derating Curve 120 100 80 60 40 20 0 M1 Version M1 Version 2. 3. 4. 5. 6. 7. BELLCORE TR-NWT-000332. Case 1：50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ There is no pin at PIN10 & PIN15 for FKC05-W series. OUTPUT POWER (%) 1. -40 -25 -10 5 20 35 50 65 70.1 80 95 105 110 AMBIENT TEMPERATURE(℃) Page 2 of 3 Issued Date：2008/05/21 EFFICIENCY(%) 90 85 80 75 70 65 60 55 50 45 40 FKC05-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 OUTPUT LOAD (% of Full Load) 0.100 (2.54) Suffix-SMD Pin size is 0.02(0.5) Dia or 0.01 x 0.02 (0.25 x 0.50) Rectangular Pin 1.00(25.4) 0.18(4.6) 20 9 10 11 Pin Area 0.04 x 0.02 (1.0 x 0.5) 0.600(15.24) 0.15 (3.8) 0.40 (10.2) 0.15 (3.8) 1 BOTTOM 5 VIEW 16 9 13 12 0.80(20.3) 0.80(20.3) 0.43(10.9) 1.26 (32.0) 16 15 14 24 0.44(11.2) 0.25 (6.4) BOTTOM VIEW 0.200 (5.08) 0.700 (17.78) 1.25 (31.8) 2 3 0.02(0.5) 0.92(23.4) 23 22 90 100 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) SMD PIN CONNECTION DIP PIN CONNECTION PIN 2 3 9 10 11 SINGLE - INPUT - INPUT DUAL - INPUT - INPUT NC COMMON NC(Note 8) NC(Note 8) NC - OUTPUT PIN 23 22 16 15 14 SINGLE + INPUT + INPUT DUAL PIN SINGLE DUAL PIN SINGLE DUAL + INPUT + INPUT 2 3 - INPUT - INPUT - INPUT - INPUT 23 22 + INPUT + INPUT + INPUT + INPUT 9 10 11 Others NC NC NC NC - OUTPUT COMMON NC(Note 8) NC(Note 8) + OUTPUT + OUTPUT 16 - OUTPUT COMMON COMMON NC 15 NC NC - OUTPUT 14 + OUTPUT + OUTPUT NC Others NC NC Page 3 of 3 Issued Date：2008/05/21